| Author | Message |
conkaa
Posts: 432
http://vk.com/cedricgarage Location: Australia Occupation: crying about cats Age: V$: 4915 |
#7761 2016-01-28 02:58 |
|
so after searching for another 240 for a while, i found one
apparently he was going to tun it into a drag car? dont know why?? but what ever its currently ls3 powered? no idea how he fit that in there but im not one to judge he said he wouldnt go lower than 3.5k anyway here is the car 
|
|
☆A U T O☆S A L O O N☆ M A G I C K E☆ IG : CEDRICSGARAGE |
|
ShadowPhoenixTar
Posts: 29
Location: Philippines Region V Occupation: McDonalds Cashier Age: 33 V$: 7,391 |
#7762 2016-01-28 12:03 |
# ThatBoostedGuy : the typical JDM fan would become increasingly butthurt about the "ruined car" /rant Well, the R32 is quite heavy, so I wouldn't mind, since the RB26 is quite heavy as well. If you swap a heavy engine with a heavy engine, to a heavy car, the power-to-weight distribution, and the weight distribution, wouldn't be too disturbed/ However if you swap a light engine with a heavier one into a light car, like for example a 110mm bore/stroke V8 with quad turbos into an AE86, I will have a talk with you. /rant end |
|
David_2709
Posts: 1987
Location: Germany Occupation: Age: V$: 2750 |
#7763 2016-01-28 13:58 |
|
I thought about the Cobra R front bumper again - and came to the conclusion that I don't want to install an original one. With only 300 units ever produced I don't want to ruin an original one. I sold it to a Ford Performance Dealer that knows his stuff. Instead I got a gray Replica. Also a black Cervini spoiler, which will be painted in Ford Laser Red like the old front bumper. I also got black headlight housings - for the looks
 I also installed Coils and Springs (Onmi Full Body). I couldn't wait to install these things so I instantly took all parts off. Not the brightest idea to work on a car midweek. The Bus will do for 2 days. Next thing will be a engine modification (intake, fuel rails, maybe cams, headers if I scratch the money together) Sold the old yellow Civic too. The car wasn't worth much anyways |
|
 |
|
Tom Diablo
Posts: 687
Location: Germany Autobahn 44 Occupation: Self-combustion Age: 34 V$: |
#7764 2016-01-28 17:16 |
|
I've just finished mounting the rotary into the Civic. Was pretty straightforward but it doesn't run yet. No fuel lines, no wiring, no nothing. I have to re-route the exhaust pipe since the tunnel will be used for the driveshaft. I've also managed to get a Miata driveshaft + diff and they are at a driveshaft specialist for some modifications. I gave him the measurements it has to have so it'll fit nicely.
|
|
 Diesel life |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#7765 2016-01-28 17:50 |
|
Sup all, was lately more in lurk mode, was waiting to get few things seteled to post update.Basicly as u know the Golf was almost done last time and its all done till now and its registered and on the street.Love the clean look.
     The reason i was waiting was that we needed a new daily since me and my darling are arguing owe the daily all the time.And in the end i ended with a new car and she has now the E92.  Its a 97' Audi A4 B5 1.6, its haveing 250000km and its in rlly mint condition, the engine is rlly exhausted but works perfectly fine.picked it up for arround $3000.Its previouse owner put some BBS rims on it but oiweral its stock.Drives good, feels good, guess its time to ruin it.      *cheers* |
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#7766 2016-01-28 18:29 |
|
Last night I finally put the finishing touches on an S13. If you've been around for a while, you'll remember my rotary powered 240SX which i spray painted. It was dubbed "Sharkey" and was sold, however I bought it back a while ago and never mentioned it again. You may also recall that I converted my S13 back into an onevia. I actually got that front end from this car and put the S13 front end onto sharkey, to put Sharkey V2 in motion. Believe it or not, after owning so many S13s and 240SXs, I've actually got a whole room dedicated to S13 model parts, including aero, lights, interior bits and pieces, and anything else you may need to put one of these back together. I put my left overs from the other S13 and revamped this car. It's true to what it was when I bought it, though not the original engine it came with, this one has a 13B that should put out anywhere from 500 to 700 wheel horsepower. It's a bridge ported twin turbocharged rotary running all upgraded internals and can run 98 Octane or Racing gas depending on what I want to put in. Revs to 9K and the sounds are insane.
   Day time pictures will come, and I'll either paint it or spray paint it just like the original sharkey. |
|
 Do it for the ratchets |
|
RedCarDriver
Posts: 1211
Location: United States Arizona Occupation: it's complicated... more complicated than my relationships Age: 30 V$: 86310 |
#7767 2016-01-28 19:40 |
|
Wow, nice work with that. That's almost too nice to paint with a rattle can, tbh.
|
|
|
|
|
Chugle
Posts: 53
Location: Canada Toronto Occupation: Making vehicles sexy. Age: V$: |
#7768 2016-01-28 20:31 |
|
Well, some stuff happened recently. I was ROBBED! Some cunt in this black Suburban appeared to have a bullbar decided to slam into my car as i was exiting my driveway, and at this point i wasn't really aware of what was going on, and the last thing i remembered was 4 dudes getting out the car, and one of them opening my door and knocking me out. I woke up in a hospital a few days later, after being in a COMA. That's right, a COMA! Long story short, they stole my 240sx, my Prelude that i was driving was crushed, and my house was looted, and burned. Luckily I had insurgency for everything that was stolen, and another long story short, I'm rich off that insurance money. So, some new stuff is coming...
|
|
|
The master of all things autistic.
|
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#7769 2016-01-28 21:36 |
# Harrison15 : Wow, nice work with that. That's almost too nice to paint with a rattle can, tbh. I'm with you on that, however not really sure how I'd like to colour it 
|
|
|
Do it for the ratchets |
|
marcus915
Posts: 1172
Location: Canada Vancouver Occupation: I've got nothing to hide Age: 25 V$: idk lol |
#7770 2016-01-28 21:43 |
|
MIDNIGHT PURPLE.
|
|
//C o o l d o w n\\
offset > takeoff |
|
Falken HD
Posts: 38
Location: United States Occupation: Work Age: 25 V$: 1320 |
#7771 2016-01-29 00:45 |
|
Bought my first project car! Its an awesome starter car..it came with a 347 stroker (stock 302 bored and stroked to a 347) with a B303 cam, shorty headers into true dual magnaflow mufflers dumped, cold air intake, new distributor, some mags on skinnies up front and 255 street tires in the back..its got 414hp/362lb-ft from what the previous owner said..well here's some pics of it! Lemme know what you guys think!
 
|
|
|
God damn America
IRL Car - 88' Foxbody 5.0 5spd |
|
ParkerFM01
Posts: 866
Location: Canada Occupation: pizza man Age: 22 V$: h |
#7772 2016-01-29 01:16 |
|
Thanks for all the help guys.
 I would tell you if it runs but I have no clue... I still have to hook everything up and put oil in it. I'll keep you posted, though... Added 4 minutes later: # Falken HD : Bought my first project car! Welcome to the #mustanggang m8 |
|
|
'09 Mazda 3 - Eibach Sportline Springs - Custom fab 2" straight pipe - 15" RTX Unknown wheels
'98 Civic DX - This bitch STOCK |
|
RedCarDriver
Posts: 1211
Location: United States Arizona Occupation: it's complicated... more complicated than my relationships Age: 30 V$: 86310 |
#7773 2016-01-29 01:34 |
|
|
|
marcus915
Posts: 1172
Location: Canada Vancouver Occupation: I've got nothing to hide Age: 25 V$: idk lol |
#7774 2016-01-29 05:23 |
|
so I mean, this car stayed at monster truck height for quite some time now. I think I know what I want to do though. I sussed out a set of SSR Speed Star MKII's, 15x9J all around. Fit snug under the stock fenders wrapped into Toyo Proxes R888 rubber.
   Going to drift this thing at grassroots events (has a Cusco LSD already and a good SR20DE) until that blows up, then I'm going to do a full rebuild and 1JZ swap and Type X. Basically going to become the street car version of my Sil80 (Which originally was meant to be a street car). |
|
|
//C o o l d o w n\\
offset > takeoff |
|
Lagano
Posts: 1739
Location: Slovenia West side Occupation: Taking it easy Age: 24 V$: :$V |
#7775 2016-01-29 21:43 |
|
What's up guys? I haven't posted anything about the Supra for a while, mostly because i was searching for parts. Andrej, my friend who has the tuning shop, was more than happy about the HKS engine i found, but the rims seemed a bit too expensive for him, but he didn't mind, we got the engine for cheap anyway.
After we bought the parts needed, we decided for some decoration  Andrej managed to get some suspension parts from a local part dealer: K-Sport coilovers, front drift-spec suspension arms (more steering lock) and some 7" springs. For now i will probably keep the rear suspension arms stock, because the rear end drifts a lot. And that's exactly what i need. You may have noticed that the front end is a little too high, but that's because there's no engine installed yet.   Final summation: We've done quite a lot of progress, i'd say we're almost done! But we're still waiting for the engine and the 19" rims to arrive. The rims i have now are still for sale for 300€. They are a bit used, but in good condition. |
|
conkaa
Posts: 432
http://vk.com/cedricgarage Location: Australia Occupation: crying about cats Age: V$: 4915 |
#7776 2016-01-30 11:09 |
|
240 update
started stripping the car down for a respray so its sitting on some random steel wheels that i had lying around iv'e already primed it, the bad: i believe the frame is bent, not really unexpected tbh, it was a missile the quarter pannels were rusted/bent to all hell so i junked them,  sorry for cellphone pic |
|
|
☆A U T O☆S A L O O N☆ M A G I C K E☆ IG : CEDRICSGARAGE |
|
NK748
Posts: 413
Location: Belgium Occupation: nk748 Age: 43 V$: A lot |
#7777 2016-01-30 20:52 |
|
Hi guys! Some news from the shop :
The tow truck restoration is on its way i removed the awful front bumper and trashed it. The tow part has been taken down to grant acces to the chassis.   In the meanwhile bodywork is done on the Miata but there's no engine yet. Today, a container arrived with two client's orders. The Supra is in mint condition with its original N/A 200hp engine and automatic gearbox. The RX-7 is kinda rusted and damaged but this is a full rebuild project so the original shape doesn't matter too much.  A friend comes from time to time to help me but he's got a life too, so great news for you car enthusiasts, if you're jobless, i'm hiring a mechanic OR an bodyworker. Please come by the shop to apply. |
|
 |
|
ParkerFM01
Posts: 866
Location: Canada Occupation: pizza man Age: 22 V$: h |
#7778 2016-01-30 21:33 |
|
So, my cars are painted... The Supra is now grey, and the Mustang is the same as it was before, just the front clip matches now...
  I didn't think I needed flares on the JZA80, but, I probably do because, look... |
|
|
'09 Mazda 3 - Eibach Sportline Springs - Custom fab 2" straight pipe - 15" RTX Unknown wheels
'98 Civic DX - This bitch STOCK |
|
FamousMan
Posts: 513
Location: United States Occupation: Age: 29 V$: 275,666 |
#7779 2016-01-31 07:41 |
|
Soooooooo it's 2:00 am and I can't sleep, who wants to help me with some 240 stuff?
|
|
conkaa
Posts: 432
http://vk.com/cedricgarage Location: Australia Occupation: crying about cats Age: V$: 4915 |
#7780 2016-01-31 08:14 |
|
^^ yeah man ill swing by!
|
|
|
☆A U T O☆S A L O O N☆ M A G I C K E☆ IG : CEDRICSGARAGE |
|
FamousMan
Posts: 513
Location: United States Occupation: Age: 29 V$: 275,666 |
#7781 2016-01-31 08:20 |
|
Sweet! I'll see you in a little bit. Thanks in advance man!
|
|
marcus915
Posts: 1172
Location: Canada Vancouver Occupation: I've got nothing to hide Age: 25 V$: idk lol |
#7782 2016-01-31 08:25 |
|
@NK748 those cars look mad. RX-7 is looking good and the Supra is mint.
240SX has held up well - two back to back drift events + runs on the touge. Just a little banged up and the tires are basically worn to shit (only gone through two sets of tires because 165 horsepower).    Lost my rear bumper at Sekia but that's okay, because I picked up a bunch of slaps. @FAMOUS I'LL COME BY IN MY BEATER This post was edited by marcus915 (2016-01-31 08:33, ago) |
|
|
//C o o l d o w n\\
offset > takeoff |
|
NK748
Posts: 413
Location: Belgium Occupation: nk748 Age: 43 V$: A lot |
#7783 2016-01-31 09:30 |
|
Thanks Marcus! Today it's Sunday, so i'm free! Is there any event or meeting I can attend?
|
|
|
|
|
supahotfire
Posts: 208
Location: Lithuania Occupation: Age: 27 V$: |
#7784 2016-01-31 10:02 |
|
For sale
In need for money I had to do this.. Miata is up for grabs, but f20 swap is already sold, so you'll get everything what u see in these photos.
*Restored suspension (bilstein shocks, springs) *Gorgeous gloss blue paint *323gtr brakes *90% good toyo proxes on bbs's *Overfenders and wider flares at front *Stainless steel exhaust *Bride lowmax seats *Nardi *etc Photos:     FOR 4000$ |
|
|
Haggard life
|
|
marcus915
Posts: 1172
Location: Canada Vancouver Occupation: I've got nothing to hide Age: 25 V$: idk lol |
#7785 2016-01-31 19:50 |
# NK748 : Thanks Marcus! Today it's Sunday, so i'm free! Is there any event or meeting I can attend? No events today, but I'm in Pudsey, doing some fully legal skids.... |
|
|
//C o o l d o w n\\
offset > takeoff |
|
LoganC
Posts: 571
Location: New Zealand Occupation: Wheel hoarding. Age: 26 V$: 420 |
#7786 2016-02-01 13:58 |
|
Been awhile since my last post so quite a bits changed.
I no longer have the AE86 due to it being too hard to source parts and general cost of everything so I bought a mint S14 Silva K's. Ive had it for a few months now and decided I have the time/money to fund it to be my project. So here it is:    Its all fairly stock apart from Silva Q's unsure on the year wrapped in Continental Sport Contact tires. So the plans in the next few weeks is to find some aero and widebody, also some wheels, Coilovers and possibly some interior mods but not in a huge rush for these. |
|
 |
|
Coprone
 |
#7787 2016-02-01 16:54 |
|
Hi, again. Some may remember me, some not. I had a beige slammed S14 with D-Max bodykit & V-TEC, plus a slammed dead CRX in my backyard. Do I still have these cars? CRX went for parts & S14 is at the other garage without rear axle.
So, what do I drive now? A PRIUS! Yes. Toyota Prius Hybrid. Why do I have it? I won a lottery that I was offered on the plane. Prize was a Prius, which is mine now. I don't care what others think about it, I'm just building it all for myself. Planning to get it lower & wider like most of my cars are. Basically making it unfunctional. I'll drive it as much as I could & I'll maybe get an engine swap done, but not soon. As most of the "stance scene guys" do, I changed my wheels. They're now geniue Work Emotion T7R wheels with a bit stretched Dunlop Direzza tyres. Of course it was like a lifted truck for me & I lowered the "most hated car on the internet". Played around with the fitment & spacers & now got it done pretty nicely. Plus I tinted the middle rear light. Nothing else so far.   
|
|
|
|
ParkerFM01
Posts: 866
Location: Canada Occupation: pizza man Age: 22 V$: h |
#7788 2016-02-01 17:01 |
|
If any of you see a red 350z with a broken right headlight and destroyed left door, stop him. The fucker tried to race me on the downhill, lost control, put me into the wall and drove off... My ABflug bumper is ruined and my front left quarter is dented and loose. Now I need to switch to my SECOND bodykit (which, is actually pretty dank) I'll be selling my current skirts and rear bumper, anybody want them?
|
|
|
'09 Mazda 3 - Eibach Sportline Springs - Custom fab 2" straight pipe - 15" RTX Unknown wheels
'98 Civic DX - This bitch STOCK |
|
Lagano
Posts: 1739
Location: Slovenia West side Occupation: Taking it easy Age: 24 V$: :$V |
#7789 2016-02-01 18:34 |
David_2709
Posts: 1987
Location: Germany Occupation: Age: V$: 2750 |
#7790 2016-02-01 19:01 |
|
got the bumper sprayed with a rattle can- let's see about a complete respray when the car is done. Now I need new wheels and the performance package then it should be complete... but project cars are never complete right :I
|
|
|
|
|
NK748
Posts: 413
Location: Belgium Occupation: nk748 Age: 43 V$: A lot |
#7791 2016-02-01 19:07 |
|
I had a nice sunday with Marcus, there's nothing like an empty mal parking to do some tyre burning.
Not many pictures i just tried to do donuts around that shoppint cart rack.   Anyways the week has begun with stripping the white RX-7. I really need a mechanic to build engines for my cars. |
|
|
|
|
Coprone
|
#7792 2016-02-01 19:36 |
# Lagano : Are you going to drift it?This has been in my signature for months, so I guess it'll happen 
|
|
|
|
|
supahotfire
Posts: 208
Location: Lithuania Occupation: Age: 27 V$: |
#7793 2016-02-01 20:31 |
|
This is the reason I needed money quick.
Yeah, I bought a garage, I don't need to rent anymore. (Put up a huge banner 4 Vstanced, LOL) Took some shots of the Lexus inside (steelie is on 'cuz I had a flat). She isn't healthy at all, I'm going to look into the engine.  
|
|
|
Haggard life
|
|
Lagano
Posts: 1739
Location: Slovenia West side Occupation: Taking it easy Age: 24 V$: :$V |
#7794 2016-02-01 20:54 |
|
I have started this week very good... because the 600hp 2JZ arrived!! Hell yeah!
We put it in the Supra right away:  I was so excited, i just couldn't wait to try out all that power, so i went on Korada (a hill in the middle of nowhere, few kilometers from my hometown) to shred some tyres. The road is barely wide enough for one car, but still, i was going well. Andrej took some shots of the action:     The Supra is almost done, actually it's already driftable, as you can see. The 19" rims still have to arrive, but i wouldn't fit them right away, because i wouldn't risk getting them scratched (they were quite expensive). We'll do some finishing touches to it and then we'll probably go to drift events and stuff like that. |
|
FamousMan
Posts: 513
Location: United States Occupation: Age: 29 V$: 275,666 |
#7795 2016-02-01 23:02 |
|
Marcus and Connor stopped over in the late night/early morning the other day to help me with some 240 work.
Here's a few pictures and a list of some of the stuff we did Took 2jZ out and put RB25 in. 2JZ is now waiting to be put into another car or I'm willing to sell it Stripped front panels, hood, headlights, and bumper off Primed new panels, and bumper for minty paint matching   Also you definitely noticed I painted the 240 again. I have my own spray gun and can't ever make up my mind. It's going to happen.  I'll update you guys once I get the panels put back on. I'm also looking for a daily driver, if you or someone you know has something they're willing to sell just let me know. This post was edited by FamousMan (2016-02-01 23:33, ago) |
|
David_2709
Posts: 1987
Location: Germany Occupation: Age: V$: 2750 |
#7796 2016-02-01 23:09 |
|
(your wheels are clipping through your overfenders
)Do you respray other vehicles too? My Mustang could need a respray if it's done |
|
|
|
|
FamousMan
Posts: 513
Location: United States Occupation: Age: 29 V$: 275,666 |
#7797 2016-02-01 23:32 |
|
(I know haha It doesn't actually poke through it just did it when i took the picture for some reason, was going to fix it but was too lazy haha)
Yeah I could definitely do your Mustang. Just pay for the paint and we'll get it done. This post was edited by FamousMan (2016-02-01 23:42, ago) |
|
LoganC
Posts: 571
Location: New Zealand Occupation: Wheel hoarding. Age: 26 V$: 420 |
#7798 2016-02-02 00:06 |
|
Quick update.
Today Ive managed to pick up a DMAX Hood and Vertex wide fenders from a part out that a guy close to me was having due to him destroying the rear end of his S14 drifting, they're in great condition too! Also I decide to go pick up some wheels, so I got some Work Meister M1 3piece wrapped in Michelin Pilot's which look amazing fitted and I got a good deal on Finance for them!
  Later tonight Im going to go have a look at some DMAX rear overfenders after work but Im still not sure on a bodykit to go with. At the moment Im thinking Ill go with a BN Sports kit but im open to suggestions!
|
|
|
|
|
ParkerFM01
Posts: 866
Location: Canada Occupation: pizza man Age: 22 V$: h |
#7799 2016-02-02 01:40 |
|
I have told my friend, who lives overseas in Gunma Prefecture, many things about you guys from Valo, and I think you guys would like to see what he's doing over there. I'm taking a little break for a while, but I think you guys will like what's going on with his car...
((I really want to change it up, I keep doing the same stuff in all my RP's and I want to have fun with it, my content is getting bland, i hate it.)) [The perspective would switch] Hello, members of this website, my name is Katsuo Wantashiwa and here is my car, it's a Nissan S13 Coupe! I have had the pleasure of owning this car since 2011 and have done many togue runs with it. The car has seen better days, but it is still going strong! I set up a dark room and took some pictures? Do you like them?  
|
|
|
'09 Mazda 3 - Eibach Sportline Springs - Custom fab 2" straight pipe - 15" RTX Unknown wheels
'98 Civic DX - This bitch STOCK |
|
RedCarDriver
Posts: 1211
Location: United States Arizona Occupation: it's complicated... more complicated than my relationships Age: 30 V$: 86310 |
#7800 2016-02-02 03:29 |
|
Nice!
Which engine do you have in that? (OOC: Also, yeah, I kind of have that problem too sometimes... I usually solve it by doing what you're doing, or saying I'm assisting on another person's build. )
|
|
|
|
This topic is locked, new posts are not allowed.