Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
hello, was found in the man who welded engine bay by quality, it can now be installed in the engine.
Looking so freakin good this s13
We had a blast on our trip to Japan!! As Phonexius told you we were in Osaka and visited Holeecrab and Ramalhinho07. We also met with FamousMan, hooned a bit on the parking lot and drank some sake. 😃 But before that i was at the famous Ebisu circuit with Boostio, Smokie and GoverNick. Lots of great cars were drifting there but we got most of the attention as soon as we arrived. It's hard to stand out in Japan but just look at these Lambos!!!
Even if the two Huracans turned more heads i still prefer older rides, especially Nick's Diablo SV with that pearl red colour. B)
We were just chilling, talking about stuff, watching drifters and admiring our cars for a few hours, then we decided to have a go too. I made one lap more fun and went a little sideways! It wasn't really the smartest idea to do that with a Porsche but i couldn't resist. 😃 The Lambos did a few laps as well but they had more power and less steering lock so they couldn't drift much. I mean, they're not Daigo Saito! 🙂)
And thank god that the guys took some photos of the action.
After a track day at Ebisu we visited Nakai-san to sell Boostio's 911 as he said. It was an honour to meet him and all those Porsches, he really liked mine too! All in all, it was really fun to visit Japan again after some time! There was always something interesting, the nice cars or the places themselves. When we met with everyone we headed back to Tokyo, where we got these beasts from. While KeeJay, Phonexius and Driftphantom were doing some business for their wheel shop, i was looking for 2JZ parts for the Lexus cause if all the Speed Devils shop's cars got more than 1000HP, you know it's the right place for top shit parts. 😃 So i ended up with a forged crank, rods and pistons, custom stage 3 cylinder head and stage 4 BC camshafts. I managed to get quite a discount cause i threw in the old parts, they always come in handy for them cause they can rebuild them or sell them on.
See you tomorrow when we get back to USA, i'll post some more about #ProjectMX5 and things that have changed in Oklahoma too. 🙂
Spoiler:
Weekly paycheck x2: +V$1500
2JZ parts: V$4750
Remaining: V$7990
So as i told you yesterday we continued with #ProjectMX5 after we got some sleep and went to Ben's place. Before our trip to Japan i ordered some stuff for the MX5's V6. The most important things were a SPEC Stage 2 clutch and a manual transmission, cause this Miata was a manual before. http://www.ebay.com/itm/05-10-FORD-MUSTANG-GT-4-6L-V8-5-SPEED-MANUAL-TRANSMISSION-/192129127706?hash=item2cbbc9d51a:g:MFoAAOSwX~dWnW44&vxp=mtr So i got a manual transmission from a Mustang GT, i didn't find any from a V6 cause most of those are automatics, but i thought "it should fit". 😃 It did but the original MX5 transmission was a little longer so we had to move the engine backwards a bit.
I also thought about some upgrades, the first one is a head swap, to be precise i got a set of DOHC heads from a 3.7 V6 from a newer Mustang, with cams, valves and everything. http://www.ebay.com/itm/2011-Mustang-3-7L-V6-Cylinder-Heads-Cams-Valvetrain-/182348346137?hash=item2a74cef319:g:gtIAAOSwj85YNOUQ&vxp=mtr I think the bore is pretty similar to the 4.0 so they could fit with no problems, or maybe the heads will have to be rebored, we'll see. http://www.ebay.com/itm/SHORTY-STAINLESS-STEEL-HEADER-EXHAUST-MANIFOLD-FOR-11-15-FORD-MUSTANG-3-7-V6-D2C-/401258714455?fits=Model%3AMustang%7CSubmodel%3AV6&hash=item5d6ce21557:g:csgAAOSw241YeE73&vxp=mtr I ordered some "shorty" headers as well, they are made for the new heads and the engine will fit in easier. The swap is almost done, we checked if everything is in the right place and we're making some mounts at the moment. 🙂
Spoiler:
V6 DOHC heads: V$299
SPEC clutch: V$479
Manual transmission: V$535
Exhaust headers: V$169
Remaining: V$6508
That mx5 is turning into a realy damm cool thing i've considered at the past of building an V6 mx5 also but i'll go with the 626 engine.
^ I think most of V6 swapped Miatas have that 2.5 engine, so you can't go wrong with it. 🙂
So yesterday we pretty much finished the #ProjectMX5 V6 swap, but today we found out that the new heads need some work. They fit on the engine but there is a bore difference between the 4.0 and the newer 3.7 engine, so we took the Miata to a nearby engine specialist to fit bigger valves and make the ports the same size. Not only that, the camshafts had to be tuned for the new valves too. After some tests the V6 was running fine on all cylinders, so the Miata is drivable now! It doesn't have an exhaust pipe yet, probably i'll just straight pipe it cause i don't think the V6 will do it's best with the stock exhaust. 😛 I didn't make any photos then, but you'll see when i go for a drive with Phonexius. 😉 After we sorted this out we installed some 1JZ parts on his 180, but when i saw the R33 without suspension and engine i knew that he has some big plans for it. Also i gave him V$800 cause he gave me the Miata and R33 is costing him a lot!
Meanwhile i got some news from the boys at Side to Side HQ: First, here are the new wheels and brakes i got for the Chevelle, it was expensive af but worth it. I was thinking of a suspension upgrade as well but they already fitted the wheels so we'll see about that later.
3Style's 180SX got some new wheels, he traded the BBS with our JDM supplier Tyretear for those AVS model 6, on top of that he got a pair of Recaro SR4 seats and a Nardi steering wheel.
It turned out that 180's not so clean as it seemed, cause 3Style found some rust on the inside of the rear fender. He already sanded it a bit, for now it looks like rust was only on the surface.
And just as one project is getting done, here comes another one. 😃 Skip found this thing on Craigslist and the seller really wanted to get rid of it so he brought it home for only V$200. No suspension, no engine, no nothing but from what i've seen from the photos the body looks alright. It's almost a bare shell so it's a blank canvas for a new project. 🙂
Spoiler:
AE86 shell: V$200
MX5: V$800
Engine tuning: V$500
Remaining: V$5008
Everthing looks dope AF wayting to see what you guys will do on that AE86
TBH mate I miss waking up in the morning going to the garage and to see the chevelle in it, its turning out way more beautiful then I ever imagined, also what ever help you need give me a call and I will see to get there to help, but won't be able to help trough the whole project cause there is a lot of sanding and welding to be done at my place 😃 Good luck whit the AE86.
PS.
We should line up the Lexus whit my R33 when I finish it 😃
Not much for today, me and Ben just made straight pipes for my MX5. After some cutting and welding it now looks like this, when we installed them we fired up that V6, and it sounds surprisingly good! It's pretty loud, but that's what you get with straight pipes. I think it would be too much work to fit 2 mufflers and cats so we chose the simple way. Maybe they're too long, but it's still better than no exhaust! 😃 I'll probably make some more adjustments later on.
Tomorrow we're going for a drive with Ben's 350Z and the MX5 and check the progress of his R33, so stay tuned. 😉
Spoiler:
Weekly paycheck: +V$750
Sold R32 wing to yngsensei +shipping: +V$125
you'll see in 2 days: V$3409
Remaining: V$2474
Straight pipes sound sick on most engines!
After we made the exhaust for the MX5 we went for a cruise as Phonexius just told you, also we checked the progress of his R33. When we got there it was in a million pieces cause it will get a complete rebuild, Cate was working on the chassis so the R33 will withstand really high speeds. I didn't make any photos cause we helped him with some welding. All i can say is that #ProjectR33 won't be on the road for a long time, there's loads of work with it at the moment but the final result will be so worth it. And Cate is a pro with bodywork so it will be done like it should be. 😃
There's also some work waiting for me back in Oklahoma, so more updates when i get there. #ProjectMX5 is getting done but it will be continued in our garage, that's why i borrowed a trailer in the first place! 🙂
Cant wait for ProjectMX5 or ProjectR33.
Well as i said MX5 runs and drives, it's almost done but Ben's R33 will be a hell lot better so it will take a lot more time. 😃
# Zero :
Cant wait for ProjectMX5 or ProjectR33.
Project MX5 is almoust done meanwhile Project R33 won't be shortly trust me on that one mate.
Btw lagano was nice having u at my place mate, come to a visit again 😉
For sure mate, i like working on such nice cars. 🙂