VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ Side to Side Tea...
 
Notifications
Clear all

V$ Side to Side Team Roleplay

593 Posts
57 Users
0 Reactions
322.2 K Views
3StyleLTU
(@3styleltu_23409)
Trusted Member
Joined: 10 years ago
Posts: 74
 

i think he be daily car, maybe drift car. I don't know right now :/



   
ReplyQuote
Lagano
(@lagano_19398)
Noble Member
Joined: 11 years ago
Posts: 1731
Topic starter  

Sup guys.
The first thing 3Style wanted to do with the 180 was lowering it, so he bought some Megan Racing coilovers right away. Even if he doesn't have any plans for it yet these coils are good for the track and the street, so it was a good choice. Right after we installed them, Skip turned up in front of our garage! He was really impressed by the 180 and my R32, but he was so jet lagged that he didn't even see the rest of our rides, he just needed some sleep after his long trip from Japan.

As you can see, the 180 already has plates too. The seller gave them with it, he was planning to register it since it just became 25 years old. I also decided to keep the R34 wing on the R32, so i already painted it and fitted it on the trunk for good, so now there are 3 Skylines in 1. 😛

Meanwhile our dragster got some more weight reduction! Now i'm looking for a racing seat and steering wheel, i'll also need a roll cage built in.

Moving back to the 180, it has a SR20DE redtop like 3Styles previous S13. It's really clean from the inside and outside, however i wonder how the car is still in such good condition....

...because the tires are so bad that when we went on a test drive, we went sideways too easily!! At least we had a lot of fun, and as far as i know 3Style he won't change the tires very soon. 😃

Skip said that his S13 is coming too. This will be already the third 180SX in Ardmore but i'm still excited to see it. 🙂
Spoiler:
180SX: V$7000
2x weekly paycheck: +V$1500
Megan Racing coilovers: V$749
Remaining: V$17665



   
ReplyQuote
Benny
(@benny_8309)
Noble Member
Joined: 13 years ago
Posts: 1141
 

Damn mate that wing fits hell yea 😃
Soon Ardmore will turn in to a small jap village xD



   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

Hi guys,

As you know I've just joined Side to Side, so I decided to post for once lol
So as this is my first car in the USA, I wanted something Japanese but also a touch of American with a V8.
I ended up buying a Lexus SC400 with a 2UZ for V$1,750. (Original price, ad taken down)

It has bits of rust here and there and needs a wash but other than that it seems to be ok, for now anyway.
I'll post more later.



   
ReplyQuote
Benny
(@benny_8309)
Noble Member
Joined: 13 years ago
Posts: 1141
 

Nice SC400 Good luck whit it!



   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

Thanks 🙂



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

ypur sc look good is nice to see another guy here at VS with another Sc.



   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

Hey guys,

I haven't posted in a while but it's for a good reason;
The 180 has changed a good bit since I last posted.
Its now in America, not registered yet, and currently in STS garage.
The total changes are: A new paintjob, set of rims, new bodyparts and a new exhaust which I will post tomorrow, if I remember.

In the previous week spent a lot hours sanding the 180SX and doing all the metal work to fix all the dents. Once it was all sanded and the dented rear panels straightened I started laying primer on it.

After 4 days in the paint shop, the car arrived yestrday and it was gorgeous! I decided to go plain purple on it and I wasn't wrong. Right After the arrival we jumped on to the assembly. There are still few bits missing but they will be fit to the car tomorrow.
Then, I put on the Impul Silhouettes I bought from David_2709.
I also bought A LOT more stickers on the way from Japan, so I will update when they come too.

The new bodyparts will be fit to the car tomorrow if I remember.
Spoiler:
New bodyparts & paint: V$3500
Stickers:V$25
+Weekly paycheck: v$750
Total:V$14890



   
ReplyQuote
Lagano
(@lagano_19398)
Noble Member
Joined: 11 years ago
Posts: 1731
Topic starter  

Here are the new parts that Skip mentioned: A set of overfenders to make his 180 even wider and a new exhaust, we put some more stickers on the windows too.

He'll have to be a little more careful when reversing. 😃

As you might have seen in the previous update our Lexus got a roll cage! We went to Takeda Racing shop to get it done properly, just what we need for drag racing.

Chevelle will also get some goodies: First thing, new rims, brakes (it's hard to stop 900hp with drums lol) and maybe a suspension upgrade as well. We're in California at the moment so more info about that later. 🙂

#ProjectMX5

Benjamin bought this MX5 cause there's an engine laying around in our garage. We asked our neighbour in the paint shop if we could borrow a pickup and a trailer, he said that they won't need it for a few days so just enough to swap it in, so we did another long trip to LA.

# Facepalm :
v6 swep it ololo

Yep, we will install a V6 from a Mustang we had a while ago, not the best engine but it has enough horses to power a Miata, for now at least. But like at every project, there is a problem. Β―_(ツ)_/Β― The Stang was an automatic, but the MX5 has 3 pedals! 😛 So now we need a clutch and a transmission that fits the V6 and the car itself.

Thanks to Benjamin and Nick the Miata already looks mean with the wide fenders and those even wider Watanabes. And of course thanks to Parker that gave us this project! More updates about the #ProjectMX5 when we complete the swap. 🙂
Spoiler:
Weekly paycheck: +V$750
New rims and brakes:V$5400
Remaining: V$10490



   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

The amount of walls and cars I've almost reversed into is amazing lol. What rim/brake combo are you planning for the Chevelle?



   
ReplyQuote
Benny
(@benny_8309)
Noble Member
Joined: 13 years ago
Posts: 1141
 

Btw, for some reason I wanned to keep the MX5 for my self but sadly I don't have time or money to spend in it since I got a project sitting....You wellcome mate, I owe you at least this much for all the help on the Mustang and R32!!



   
ReplyQuote
Lagano
(@lagano_19398)
Noble Member
Joined: 11 years ago
Posts: 1731
Topic starter  

No problem bro, i'm glad that we're doing a sick project together, also can't wait for #ProjectR33 😉



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

An skyline build i cant wait.



   
ReplyQuote
Benny
(@benny_8309)
Noble Member
Joined: 13 years ago
Posts: 1141
 

# Sleepin mOnkey :
An skyline build i cant wait.

#ProjectR33 will be my project as #ProjectMX5 is @Laganos xD



   
ReplyQuote
3StyleLTU
(@3styleltu_23409)
Trusted Member
Joined: 10 years ago
Posts: 74
 

Hi guys, remember my? i have this really JDM 180sx

remove sx all chassis parts with team members and install new running gear, circumcised engine bay, make bigger steering lock.

Running gear mod list:

Scale Innovative coilovers
toyo proxes tire
BBS RS8 R17 rims
326 power brake disk
326 power calipers



   
ReplyQuote
Page 10 / 40
Share: