Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
This morning i arrived to our garage with the MX5, the first thing i saw was the LS2 engine which i ordered for 3Style's 180SX 2 days ago. The boys already did some measurements so we made the swap in no time.
There's also a lot of info about LS swaps on the internet so it was pretty easy. 😃 It's one of the most common swaps but we chose it cause LS is a very reliable engine.
3Style's 180 got a makeover in the interior as well, so a lot of stuff has arrived yesterday: Complete Bride interior, DMax floor mats, short throw shifter and hydraulic handbrake. After we installed the new interior 3Style thought "Why not slap some stickers on the dashboard cause Skip brought tons of them" and so he did.
Before i went to the paint shop to return the pickup and trailer, 3Style gave me the LS2 head covers, air filter and strut bar to paint them red. When we put these parts back on the 180, the engine bay looked much more aggressive!
As i said 3Style and Skip did some measurements when they got the LS2, so they made a straight pipe exhaust before we swapped it in, and it fitted perfectly with the headers.
I don't know if you noticed but the guys painted the chassis and engine bay in bedliner. (paint used for truck beds) This might seem strange but it was a great choice cause this paint really makes the parts tougher. Later on the MX5 will get a respray, maybe the 180SX too but most of the body is alright so we'll see. Also, Phonexius gave me the old plate of his 180, it will look great on Skip's car. 😃 Nothing new for our AE86 yet, we're still gathering ideas for the build and searching for parts, so this project will take some more time.
Spoiler:
Bride interior: V$500
DMax floor mats: V$200
Strut bar: V$96
Hydraulic handbrake: V$150
Short throw shifter: V$250
Remaining: V$1528
That SX is just mental!!
I was hoping to not see this on the RP Thread but here it is, LS Swapped 180SX 🙁, well at least the interior is sweet 😃
I am not a big fan of LS swaps but your work guys look incredible
# Phonexius :
I was hoping to not see this on the RP Thread but here it is, LS Swapped 180SX 🙁, well at least the interior is sweet 😃
Mate, here is USA, we love V8 engine 🙂)
# Phonexius :
Well as i said there's a lot of LS swaps here but it's a reliable engine so why not. 😃
Sup, so a few days sx been assembled, rear lamps shaded light gray pellicle, rear wheel drive car is standing wide, so i need fenders. here is first drive with "new" engine, its very fynny 😛
180SX
Hey guys,
Haven't posted in a while, but since a few things changed I thought I should update.
So since the last update on my 180, we've swapped my Impul Silhouettes for a set of Work Equip E40 w/tires +V$100 my way, reupholstered the dash and stuck on some more stickers. I also bought Floor mats and a Tsurikawa and it's currently hanging on my rear-view mirror.
The plates are on now too. I had bought Ganador mirrors from David_2709 before I joined STS but I never fitted them, so they will be painted and fitted soon.
AE86
Me and Lagano spent some of today sanding and filling parts of the 86, we were later joined by 3Style who helped us primer some finished places.
We have an engine and suspension arms coming also so stay tuned.
I'm also looking for seats, bodyparts, practically anything for an 86. If you have anything you want to sell, hmu.
Spoiler:
Mats: -V$60
Dash: -V$200
Work Equip w/tires: +100
Other parts for next update: -V$150.
Body Filler + Sand Paper: V$50
Weekly paycheck: +V$750
Remaining: V$1918
My SC400 is also for sale, check the used cars classifieds.
As Skip told you we sanded and primared our 86, but we're still missing some parts so the respray will have to wait. Same goes for the MX5 cause it doesn't have a hood and headlights, also there's some work waiting for us in the paint shop.
After sanding i got my hands on those 2JZ parts that i got from Japan a while ago, you can't really see the difference in the SC300's engine bay but we'll surely notice it when we do some test runs with it. 😃 The 2JZ has forged internals now so it's capable of holding a lot more boost!
The 2JZ will need some tuning so i might get some more upgrades before that.
We tried out 3Style's 180 after we put everything back together and colour matched the rear right fender, it's really fast even if the LS2 is completely stock! 😃
The AE86 project is finally starting, more updates about it when its engine and suspension arrives! 😃
damn I miss working on that SC300, can't wait to see it in action!
That's a fucking sick Soarer!
^ SC300 actually, and thanks 😃
@Phonexius Me too, i can't wait to try it! When i find a racing seat and steering wheel you'll see it in action. 🙂
# Lagano :
^ SC300 actually, and thanks 😃@Phonexius Me too, i can't wait to try it! When i find a racing seat and steering wheel you'll see it in action. 🙂
Sayd to sayd issa god.
Nice SC i hope a day i got one again but with an 2J
It's been a while since the last update cause we had some work in our neighbour's paint shop, meanwhile the SC300 was at Takeda Racing shop being prepared for a drag competition which is coming soon. They did a whole lot of work there: First, they stripped some more interior parts and fitted all those gauges and buttons on the dashboard. They also changed some wiring for those buttons and installed a Momo steering wheel, after the interior work was done they tuned the 2JZ and dyno tested it.
The result is around 1150 HP and 900 ft-lbs of torque. 😮
While the SC300 was at Takeda i ordered a set of D2 drag coilovers, which are a replacement for HKS Hipermax. I chose them because those HKS coils are long discontinued and you can't find them everywhere, and even if i would they would be way more expensive. Anyway, let's hope for some better launches now! 😃 I'm not sure about the suspension setup in general, i'll have to take a look at some drag cars to see what else i can change.
I also ordered these custom built Champion Speed Series wheels, but i still need some tires for them, hope the AoW guys can get me something!
When we brought the SC300 back home we installed the new coils, it sits a bit higher now but that's fine cause the suspension needs some space for drag racing. 😛
After that we took off the air filter from the turbo intake pipe and extended it so it's now connected to the front bumper, where the foglights used to be. 2JZ probably has some more power now than at the dyno test cause it has optimal airflow! 😃
I really wanted to try it out so i had to borrow a seat from Skip's 180SX. I could have the stock seat for now but i'll need it for the competition and until i find another racing seat, of course. Finally, i did some test runs in the evening and it's fast af! Launch wasn't the best cause the current tires are a bit used, but i'm sure it will be much better after i change them.
So the SC300 is pretty much ready for the competition, expect more updates after 20th April when i'll submit my entry and get more info about the competition. 🙂
We also did some work on the AE86! As you can see it's already primared but the respray will have to wait cause we're missing some bodyparts. Skip found this 3S-GE engine on Craigslist, he also bought a set of suspension arms and a transmission adapter plate from Auto Saloon Magicke.
The 3S fitted in the engine bay like a glove cause it's not very different from the 4A, same can be said for the transmission because of the adapter plate.
Our AE86 is slowly but surely becoming drivable! 😃
Spoiler:
SC300 preparations: V$1500
Drag coilovers: V$1181
Champion wheels: V$1648
HCR32 bumpers: V$250
Sold SC400: +V$1900
Sold SR20 driveline: +V$450
2x weekly paycheck: +V$1500
Remaining: V$1439