Author Message

zexeffect

00
Posts: 57

Location: ---
Occupation:
Age:
V$:
#5321   2015-08-29 08:33          
^^ Someone's ready to attack at the five consecutive hairpins.

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#5322   2015-08-29 16:12          
(lol restart the rp because)
Heyho chaps! I'm Richard, and after seeing all these amazing cars, I decided to show you my ride!


It's not much for now, but it's something. Got it for pretty cheap, runs like a champ.
I'll keep this stock, and probably buy something else to build.
Here's the engine:

It's a K20A, which I don't think EG6 Civics have.
That's all I got for now! Hope to see ya in the streets!

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5323   2015-08-29 16:20          
^ I love that colour. The Subaru Legacy wheels fit it nicely, you should fit some ITR Type R wheels to it since you already have the five lug conversion done. The K20A is quite a monster in that little chassis.

So I know it's only been about three days since I've bought the S15 and fallen in love with it all over again, but this car was just way too good of a steal to pass up.

A friend of mine was selling his 1985 AE86 Levin Coupe, the Zenki model. Him and I worked on this car in his garage for a few months - it began it's life in Valo as a true JDM import, as a rolling shell. We sourced OEM parts from Japan and locally from other enthusiasts and AE86 forums, so I know what I'm getting into. It's mostly stock on the exterior, and the paintwork is quite clean save for a few rough patches noticeably on the front bumper and front left quarter. We also managed to source a full dashboard and carpeting, quite to our joy, through a parts car we bought for $500 and scrapped right after.







It sits really low on stock wheels right now because he used to have a set of 16x10 Volk TE37V's under the car, but he wanted to keep those so he put the stock wheels back on for me. Mad stance yo.





The real beauty though, lies under the hood of this car. Choosing to forgo the stock 130 horsepower Bluetop 16v 4A-G, we decided to go with a 20v Blacktop 4A-G from a later model AE111 Levin. Stock bottom end and head, and stock intake manifold, but mated with an Apexi Power FC air intake. On the other side sits a beautiful Toda exhaust header, mated to a Toda N1 downpipe running to a straight through 3 inch Toda N1 exhaust tip. Trust me when I say this makes all the right noises under full tilt. Lots of other goodies, such a Koyorad radiator and catch can. Hasn't been dyno'd but we guess it runs around 250-260 horsepower to the wheels. I can't wait to drive this thing, I have big plans ;)
//C o o l d o w n\\
offset > takeoff

Facepalm

gr
Posts: 1486

Location: Greece
Occupation: dunno
Age: 24
V$: 19,175
#5324   2015-08-29 16:25          
Thanks for the tip. Your Levin looks pretty good too. Can't wait to see what you'll do with it.

stonedmonster

au
Posts: 466

Location: Australia
Occupation:
Age:
V$:
#5325   2015-08-29 16:57          
@marcus what sr20 mod and steelies mod are you using
on topic your planning on running that big turbo on stock internals?

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5326   2015-08-29 17:16          
Thanks Facepalm :) I'm planning to pretty much undo all of the stuff we did hahaha, gutting the interior, caging it, the works.

Stonedmonster I'm not running the car to it's fullest (it doesn't even run yet lmao) until I get a proper tune on it; then I'm probably going to get forged pistons and stronger connecting rods.
//C o o l d o w n\\
offset > takeoff

stonedmonster

au
Posts: 466

Location: Australia
Occupation:
Age:
V$:
#5327   2015-08-29 17:20          
yeah sweet which mod is it toretto's sr20 mod? and those steelies?

Added 4 minutes later:

dont worry found it

Added 10 minutes later:

alright some im restarting my rp due to new mods finally got some more things in my game aha
ill be going to look at a project soon i dont know what it is yet my buddy just said i had to come look at it

This post was edited by stonedmonster (2015-08-29 17:36, ago)

Smurf

us
Posts: 326

Location: United States The Pacific Northwest
Occupation: Selling Drugs To Kids
Age: 27
V$: iNEED$
#5328   2015-08-29 18:10          
Okay so i decided to not to buy the C10 since the guy wanted 8k for it and id rather but the money into something cheaper that i can build up.
Buy i did realize i still haven't sold my LM20's or Gold Fleishwolf's, both sets have been sitting in my closet since i took them off.

The Fleischwolf's are 17s with stretched Dunlops 90% tread left

(LOL Anti-Aliasing)

The LM20s are 16s with Pirelli's and about 75% Tread left.


Going for best offer.

stonedmonster

au
Posts: 466

Location: Australia
Occupation:
Age:
V$:
#5329   2015-08-29 18:44          
so i just went and looked at the car my mate wants me to get and i decided it was a decent challenge and it will have to be a drift car as it will never see a road again but yeah its a ca18det sil80 needs a shitton of work pics will be up soon

Added 7 minutes later:

here is the new beast in all its shittyness needs to be completely stripped repaired then re assembled might paint it while its stripped though



This post was edited by stonedmonster (2015-08-29 18:52, ago)

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#5330   2015-08-29 19:19          
# Smurf : The Fleischwolf's are 17s with stretched Dunlops 90% trread left


I'll take those for, say, $1,500 for the AMG

Smurf

us
Posts: 326

Location: United States The Pacific Northwest
Occupation: Selling Drugs To Kids
Age: 27
V$: iNEED$
#5331   2015-08-29 20:29          
@dxg1997 SOLD!

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#5332   2015-08-29 21:03          
Sweet! I'll come over in the s10 and get them! :D

Smurf

us
Posts: 326

Location: United States The Pacific Northwest
Occupation: Selling Drugs To Kids
Age: 27
V$: iNEED$
#5333   2015-08-29 22:14          
See ya then.

VerdalRaanebil

no
Posts: 125

Location: Norway
Occupation: Part monkey (Scaffolder), part petrolhead
Age: 27
V$: 14105
#5334   2015-08-29 22:45          

Update on the Duster


Most of the work is done.. Changed the suspension so it`s fully adjustable both in front and rear, also upgraded the brakes.



And yeah... I got her a new set of wheels! :D

And for the engine.. Not much work! Just changed the headcover`s for some Mopar Performance covers, Edelbrock exhaust headers



May be doing some height adjustments but for now, its ok.. Going to keep the engine as it is now, runs good and got a lot of power :)
VOLVO for LIFE

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5335   2015-08-30 02:35          
# stonedmonster :



so someone did a five lug conversion in the front and didn't convert the rear as well? interesting..

Added 35 minutes later:

I took my 86 out for a rip on the Nanohanadai mountain pass, and I must say, the car feels amazing on such a tight and windy road.








This post was edited by marcus915 (2015-08-30 03:10, ago)
//C o o l d o w n\\
offset > takeoff

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#5336   2015-08-30 07:16          
I had some days off work so I color-matched the red parts. Went to a good friend of mine to get the Panda part and a new realis for the headlight mechanism. Turned out that the relais was fried.

@marcus: If you need parts for your 85 (Levin is called an 85), let me know. I have a good friend who deals with Toyota parts. Big-ass storage and everything. You could get parts for almost any Toyota there.

This post was edited by Tom Diablo (2015-08-30 07:23, ago)

Diesel life

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5337   2015-08-30 07:40          
Uhm no the Levin is also an 86, but thanks. Currently the car is running mint like a cherry and feels wonderful.
//C o o l d o w n\\
offset > takeoff

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#5338   2015-08-30 09:34          
Oops; Never mind, I guess Wikipedia (at least the German one) isn't always correct... I have checked the english version now.

Diesel life

TheSkidKid

au
Posts: 235

Location: Australia Melbourne
Occupation: Getting on-gate through the CBD on a Saturday night.
Age: 25
V$:
#5339   2015-08-30 11:23          
Just stumbled across this thread. I'm planning on getting some pics out soon so I think ill show you guys my daily.
                                                                                            

stonedmonster

au
Posts: 466

Location: Australia
Occupation:
Age:
V$:
#5340   2015-08-30 13:10          
@marcus yeah i dont see why not half way converted but never needed to do the rears as drift car
its almost fully stripped down now will be in the paint booth tomorrow evening hopefully

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5341   2015-08-30 13:24          
I got the rest of the S15 intercooler piping done; I missed the Ebisu Drift Bash sadly because the RPS13 had a misfire and this car isn't quite ready.





I put this car on a diet, and stripped the rear seats and all the carpeting.





Same with the 86 coupe.



And I haven't forgotten about the S14, the majority of the motor parts have arrived, just waiting for me to assemble it. The Vertex front bumper I ordered arrived, with a custom carbon fibre splitter. I can't wait to see how this car will look when I finally finish it, it looks mean!

//C o o l d o w n\\
offset > takeoff

Smurf

us
Posts: 326

Location: United States The Pacific Northwest
Occupation: Selling Drugs To Kids
Age: 27
V$: iNEED$
#5342   2015-08-30 13:29          
After deciding to not buy the the truck i went on Craigslist to find the cheapest car with potential i could find.
Ladies and.... well probably just gentleman, this is what $1100 will buy you in Valo lol.

I know what you're thinking and it would have been $700 if it didn't have the sawblades and adapters(Apparently the only way to get adapters fors Vette's weird lug size are to special order them)

IDK what Porsche this wheel is from.


Also no idea what GTI these seats came out of lol


With the power of photoshop even a car with 50hp can do wheelies lol


Oh and the brakes on the Miata are done so now im just waiting for them to finish up on the engine.

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5343   2015-08-30 14:38          
That bug looks like a lot of work. Swing by my shop if you ever want help. 4101 Pleasant Drive, North Valo
//C o o l d o w n\\
offset > takeoff

Smurf

us
Posts: 326

Location: United States The Pacific Northwest
Occupation: Selling Drugs To Kids
Age: 27
V$: iNEED$
#5344   2015-08-30 15:57          
You got a paint booth? first thing im doing is stripping it and painting it.

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#5345   2015-08-30 23:19          
So, unfortunately, I have to restart my role play. Again. SLRR decided to delete all my PlayerCar files.

JDMgoatleg

us
Posts: 139

Location: United States
Occupation: Photoshoping
Age: 26
V$:
#5346   2015-08-31 01:05          
Hi, Im Andy. I am the proud owner of this 2003 S2k, unfortunately my wheels have been stolen, Like really? The tf wants rusted steelies? Anyway if anyone has wheels with a 5x114 bolt pattern I will buy them, im eager to get back on the road.




(forgot to turn A-A on whoops)

This post was edited by JDMgoatleg (2015-08-31 01:10, ago)
Quit

DevilishDick

ca
Posts: 115

Location: Canada Montreal
Occupation: Student
Age: 26
V$:
#5347   2015-08-31 04:55          
good news! the S2000 can run again! i've ordered the missing parts a few days ago. they should arrive soon! but for now here's my new exhaust system with 2 shotgun exhaust tips


Added later:

good news! the S2000 can run again! i've ordered the missing parts a few days ago. they should arrive soon! but for now here's my new exhaust system with 2 shotgun exhaust tips
omg im so cool

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#5348   2015-08-31 05:24          
@DevilishDick: Check your post; Your pics are duplicated

I went ahead this weekend and installed an ITB system into the car...

...and went for a late spin.


Diesel life

TheSkidKid

au
Posts: 235

Location: Australia Melbourne
Occupation: Getting on-gate through the CBD on a Saturday night.
Age: 25
V$:
#5349   2015-08-31 06:29          
@Tom Diablo - Can I perhaps have his address as I've also got a Levin Coupe and I need parts pronto. Cheers mate.
                                                                                            

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5350   2015-08-31 07:09          
# JDMgoatleg : Anyway if anyone has wheels with a 5x114 bolt pattern I will buy them, im eager to get back on the road.


I have the steelies on my S15 if you want them, $800 for the set or I can drop it more if you want.
//C o o l d o w n\\
offset > takeoff

Tom Diablo

de
Posts: 687

Location: Germany Autobahn 44
Occupation: Self-combustion
Age: 34
V$:
#5351   2015-08-31 08:08          
# TheSkidKid : @Tom Diablo - Can I perhaps have his address as I've also got a Levin Coupe and I need parts pronto. Cheers mate.
Are you living in Japan? He usually can ship parts cross country. His shop is called: Ryo's Toyota parts shop and he's at Sakura Blvd. 56, Osaka city (Dunno about japanese street names so I've made it up lol) But if you live abroad, I can give you his phone number or e-mail address. He understands english and is a reasonable guy so if you make him a good offer he'll probably ship the parts to whatever country you're in. And if you tell him that George gave you the tip he might give you a discount :D

Diesel life

TheSkidKid

au
Posts: 235

Location: Australia Melbourne
Occupation: Getting on-gate through the CBD on a Saturday night.
Age: 25
V$:
#5352   2015-08-31 09:05          
# Tom Diablo : Are you living in Japan? He usually can ship parts cross country. His shop is called: Ryo's Toyota parts shop and he's at Sakura Blvd. 56, Osaka city (Dunno about japanese street names so I've made it up lol) But if you live abroad, I can give you his phone number or e-mail address. He understands english and is a reasonable guy so if you make him a good offer he'll probably ship the parts to whatever country you're in. And if you tell him that George gave you the tip he might give you a discount :D

Nah I'm over in Palm Springs California but I'll make sure to give him a call. I'm looking for a Blue-Top Valve Cover as my current one has a shattered bolt housing. Thanks anyway, Ill give him a call tomorrow.
                                                                                            

GTRIX

za
Posts: 10

Location: South Africa CAPE TOWN
Occupation: INDUSTRIAL DESIGNER
Age:
V$:
#5353   2015-08-31 12:18          
hi there guys im all the way from south africa i have a cople of cars n body kits n wheels whos can i ask to manufacture them to b able to run on slrr??
NOSTALIC FEELING

JDMgoatleg

us
Posts: 139

Location: United States
Occupation: Photoshoping
Age: 26
V$:
#5354   2015-08-31 12:25          
What size are they Marcus? I might but them if there 17" or 18".
Quit

Smurf

us
Posts: 326

Location: United States The Pacific Northwest
Occupation: Selling Drugs To Kids
Age: 27
V$: iNEED$
#5355   2015-08-31 13:12          
So i stripped the beetle down and power washed it and sent it into paint.




Im also going to change the seats to a slightly different set.


Oh and i'll be polishing the chrome bits all night.

marcus915

ca
Posts: 1172

Location: Canada Vancouver
Occupation: I've got nothing to hide
Age: 25
V$: idk lol
#5356   2015-08-31 13:56          
@JDMgoatleg, they're 17x8 in a 5x114 bolt pattern.
//C o o l d o w n\\
offset > takeoff

FamousMan

us
Posts: 513

Location: United States
Occupation:
Age: 29
V$: 275,666
#5357   2015-08-31 14:40          
So it's been a while since i've updated you guys.
When you last saw the Silvia she was parked in the Vstanced garage. For the week in a half she was there, a lot of stuff was done to get it inspected and road legal. We even got around to color matching the Rocket Bunny parts
After all of that, I was finally able to cruise around Valo City for the first time with this thing.
I didn't get to snap too many pictures because I was having waay too much fun sliding around the streets. But here's what she's looking like at the moment



Ohhhh and I finally got around to putting an exhaust back on. Just some fancy twin tip.


DevilishDick

ca
Posts: 115

Location: Canada Montreal
Occupation: Student
Age: 26
V$:
#5358   2015-08-31 15:19          
nice S13 bro ! we should go skid a bit! my GS300's ready to go :o
omg im so cool

FamousMan

us
Posts: 513

Location: United States
Occupation:
Age: 29
V$: 275,666
#5359   2015-08-31 16:59          
Thank man! and i'm definitely down! Where were you thinking?

dxg1997

us
Posts: 1476
http://https://www.youtube.com/ch...
Location: United States
Occupation: Certified GM Mechanic
Age: 26
V$: sure
#5360   2015-08-31 19:56          
What's up guys, my name is John . I just turned 20, and finally bought my first car. A little about me, I'm a 2 time Master Mechanic on Toyota's, Scion's, and Subaru's. I'm ASE Certified to work on any part of any model from any of those 3 manufacturers. Previously, I've been driving my girlfriends base model Civic. I got tired of that, so I saved up at work for about a year and a half, and bought an Altezza. However, this car confused me. I've worked on plenty of Altezzas, and seen all sorts of 2JZ tunes. But this car is something different. The previous owner was trying to convert it to some sort of Nissan Skyline GT-R... It has a single turbo RB26, and a GT-R steering wheel. I'm the only one in my family who knows anything about cars, and my brother said I should get the car just because it had "clear bits on the engine". My parents didn't want me to get it, even though I don't live with them, because they didn't want to make it seem like their son was a hooligan, because the car is so loud. (The mod has no exhaust attachment. Help?) I got the thing for 10 grand. I sorta saved the poor thing because the guys said he was gonna AWD swap it and everything. He HAD GT-R wheels on it, but wanted an extra $1500 for them. They were covered in curb rash, so I said no thanks...









This topic is locked, new posts are not allowed.