VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

E39 big boat sh1tbo...
 
Notifications
Clear all

E39 big boat sh1tbox

72 Posts
9 Users
0 Reactions
37.9 K Views
Daniel
(@daniel_30)
Famed Member
Joined: 17 years ago
Posts: 2814
 

# skip :
engine for sure, blown rocker cover gasket so smoke from the wrong place until it's warm. Literally struggles to do a burnout. In the wet. In first. With 195/15s. Not just the engine is garbage lol, I can get in to the car through my trunk even when it's closed.

(help)

try taking one off with a bicycle chain and numb hands lol

And they're prone to get bad valve stem seals, and possibly timing chain issues lol..

Why would you do that? 😃 Ratchet and 36mm socket is all u need



   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

# Daniel :
And they're prone to get bad valve stem seals, and possibly timing chain issues lol..

Why would you do that? 😃 Ratchet and 36mm socket is all u need

The whole car is an issue on wheels lol, nothing ever goes right in that pos

And the housing needs a special tool for some reason to remove, it's annoying and useless.

can't wait until that engine blows so I can swap my M52TUB28 in, no more shitty 4 cylinder BMW.



   
ReplyQuote
Daniel
(@daniel_30)
Famed Member
Joined: 17 years ago
Posts: 2814
 

# skip :
The whole car is an issue on wheels lol, nothing ever goes right in that pos

And the housing needs a special tool for some reason to remove, it's annoying and useless.

can't wait until that engine blows so I can swap my M52TUB28 in, no more shitty 4 cylinder BMW.

oh right those have that cap that needs its own socket thingy.. long time since i touched those engines lol



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

I just bid on a factory new MK Motorsport lip with certification papers, gonna keep you updated
How much is it worth? I'd be willing to pay 200 bucks but that is already a high number



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

got the lip for 56 bucks - starting bid was 55 lel

some more work, but I forgot the actual lenses in the orange headlight plastic covers. Will fix it next weekend when I recieve my full battery to test that everything works



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

lenses are in, hopefully just once and never again
couldn't pick up the battery because the shop was closed. Car will sit for a while now so no more "one pic small text" updates for a bit



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

alright some update, replacement sideskirt arrived, bad starting issue hasn't been solved either. Probably crankshaft sensor or ventilation, spark plugs are oily as heck. Tried removing the rust on the fender and primer it for painting later, it looks horrible but I need a new fender soon anyway, has a hole from the rust and is dented (another crash damage hidden :morncoffee: )

for now just waiting on parts, readout software, orange blinker sockets for the front, fuel filter, clear side blinkers and rear gas strut for the trunk. Also still waiting for the ebay parts..



   
ReplyQuote
MACKAY
(@mackay_25093)
Honorable Member
Joined: 10 years ago
Posts: 701
 

That place in the sideskirt is a fucking illness in e39's, are you welding it up yourself?



   
ReplyQuote
Daniel
(@daniel_30)
Famed Member
Joined: 17 years ago
Posts: 2814
 

It's not a sideskirt. Anyway, you should take a look at the entire thing all the way to the front, especially around the jacking points.

Oily sparkplugs is often from old/broken valve cover gasket.



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

sideskirt/rocker panel/whatever the side thing
got a replacement metal for the front left jack point already. Mate will weld it in, found a garage to rent with the tools I need so I'll tackle that as soon as I got my license to get a 5-day-registration for the car. Right side was welded already but looks ugly, but if it works I don't really care.
Defo either crankshaft sensor or the ventilation thing, got symptoms from both. Bad startup, no power until 3.000 RPM, oily spark plugs. Clean idle and no smoke though. Changed the camshaft sensor already because the BMW dealer I got it checked at said it won't run with a bad crank sensor. Yeah, I thought they knew about their cars. For now waiting for the obd reader so I finally know which one of them is bad.

on the other hand reconnecting the battery removed one kilometer from the mileage lol



   
ReplyQuote
Daniel
(@daniel_30)
Famed Member
Joined: 17 years ago
Posts: 2814
 

Camshaft sensor usually gives you issues, but it will still start. Crankshaft sensor usually makes it not start.

Also about code readers, they are not always able to tell those two appart, because they run on the same circuit or something like that.

Yeah it's not super important how the rockers look as long as they are done properly, the most important part is the jacking points so you dont end up having a jack or jackstand go through the rocker, pushing the whole jacking point in.

My old E39 had that on both rear jacking points.



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

like I said, I have the previous mentioned symptoms. I have no idea myself anymore, only thing I can do is lift out the oil cap and see if my revs change. I got software from a E39 forum user, need to order cables and read it out. I don't want to spend the money replacing both parts even though they aren't /that/ expensive, but my job screwed me a little over money-wise. Looking for a new one asap.



   
ReplyQuote
Daniel
(@daniel_30)
Famed Member
Joined: 17 years ago
Posts: 2814
 

Oh btw, my E39 used to have starting issues, as in long cranking if it had stayed off for more than one day, and starting issues when warm and "laggy" acceleration up untill 3000. I replaced 3 coils (since I didnt check the codes I took a chance and replaced 3 randomly) and the issues went away. Although I should mention that I replaced fuel filter and crankshaft sensor a little earlier, was going to replace the camshaft too but never got around to doing it.

But like I said, oil in spark plug holes is often caused by leaking valve cover gasket. I believe that CAN cause some running issues as well. If not, its still a very common M5x thing.



   
ReplyQuote
Dr_Zoom
(@dr_zoom_29425)
Member
Joined: 9 years ago
Posts: 1110
 

Hm, my Fiesta have bit slow starting and loss power at high speed. I discover there service way over-due because the spark plug look like worn out which mean it won't burn fuel and air very well and it possible threw cat faulty code from O2 sensor. I replace air filter, oil filter, pollen filter, changed oil and replace all 4 spark plugs, then she started up quicker and bought all power back. Could be worth check service due date?! Oil on your spark plug may need compression test, it could be failure piston, gasket, or worn valve guild.

Oil spark plug = Harder to ignition air and fuel mixture = Weaker starting.

(Underline is possible faulty that have oily on spark plug)



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
Topic starter  

I serviced the whole car already, the picture of the spark plugs is when I pulled them out. Only thing to do now is an oil change. Battery is fully charged (3x charged to full by a shop). Air filter is changed, interior filter is changed, fuel filter will be changed soon. It runs fine in idle and revs fine (power only really comes 3.000 rpm + ). It is definitively one of the two things I mentioned. It doesn't matter if warm or cold, it always starts after 4 cranks. I'll wait on the software just to be sure and then fix it.

Side note, door step trims and orange front blinker sockets arrived today, sick



   
ReplyQuote
Page 3 / 5
Share: