Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Hi, im new in Valo. my name is Misha, and i just bought a Miata converted into a pickup truck. it was involved in a minor collision. pictures:
Added 15 minutes later:
More updates on the miata, i got new parts fitted.
Added 10 minutes later:
Hi! I'm back, and i got a new engine! so, uh... yeah! here you go!
# Tom Diablo :
@dxg: You can have my 4A-GZE for 800$
I want to try to keep it a Sixer. Probably just gonna throw the Jun into it, and keep the V6 for some other project. I got a lead on a thrashed sileightey, and gonna look at it. Wants $1500 for it, no engine, so may put the Essex V6 into it if its good enough to be kept. Would make a show car out of it.
im r34 front converting my stagea and putting some te37s on it before i take it to the workshop for a new turbo and tuning
my Champions were rubbing pretty bad, so I took my fenders off and hammered out the guards. No more rub 😉

While I was drifting earlier today, the motor let go in a huge plume of smoke. Turns out the head gasket went bad, and I lost compression in two cylinders. I let the car run a little more and there was oil in my cylinders, and basically shit went really bad. Since I am (or was) running on a stock bottom end with stock internals, I decided I'd spend a little more money and upgrade to a built bottom end.

Stripped down the motor, took off all the good parts, and swapped in a new reinforced JUN block. Installed a set of lower compression JUN pistons, and HKS connecting rods, then reinstalled my Powerhouse Racing ported and polished cylinder head with all the goodies on it. Gonna throw it on the dyno soon and see what power it's making, now that I can turn up the boost.
Also done a lot of work to the Miata. Went to the local wreckers and picked up a trunk and rear bumper, and bought an OEM set of tailights on Valolist. Installed my K-Sport 2-way coilovers. Mad rub on the stock 16's so I need to hunt for wheels and lower profile tires. Also bought a Bride LowMax bucket and installed Takata harnesses.

Motor is also back in, but not before I bolted on a Garrett GT35R on a custom low mount manifold. Running low boost, making around 300 whp, which is more than enough for this little car.


And I have a rollcage mocked up in the car, and the car is off to have one installed.

Now I can't decide if I want to run overfenders, or fender flares..
I bought a Sileighty...
The good thing it has going about it, is it came with a Rocketbunny wing for the back, and I can mount it onto the BN Sports inverted trunk, so it blends nicely with the painted rear windows. This car is going to be awesome. I'm thinking of supercharging the 3.8 V6 and fitting it in here. ITs got one of the worst Rising suns EVER on it, and I may make that right in the final show car. In other news, got the 2JZ mounted in the SN95 'Stang. 386 HP on 11 psi. for drifting gonna turn it to about 36 psi, but for now, this is fine. Put the 4 lug Watanabes onto it, with the adaptor plate behind them, but if I plan on bigger brakes, then gonna need to get bigger wheels. AS IS, the rims are only a few centimeters from the Calipers xD (Changed 2j mods because the other one was fugly, and not all the parts were available)
Fox update!
With the old stock 302/AODE combo and 3.73 gears I went 15.22 , 15.35 with the 4.10s and 15.39 with 4.56s. As said , make an offer , they are for sale.
New engine : Dart 351W Pro-M block , Eagle 454 stroker kit (engine has 9.9 : 1 compression ratio) , Brodrix Track 1 heads with blue valve covers , Trickflow Trackheat-R upper & lower intakes , an Anderson B541 camshaft , Accel distributor , Fast 105# injectors , FRPP fuel rail , a silver ford oilpan , an E85 kit , and an On3-style single turbo intercooled kit with 76mm turbo. Also has an FRPP Low Pro alternator , FRPP crank pulley , and a silver timing cover and electric fuel pump. At 20 psi he's making 923 tq (1256 nm) @ 4500 rpm and 1377 hp @ 7500. Transmission is a built C4 with a 3.55 final gear and a Ford NealChance torque converter that stalls at 4500 rpm. Another particular thing is that AC & PS are still there.
Body has HID front lights & smoked LX rear ones , Cervini bumpers , 5.0 badge on the quarterpanels , Cobra grille , Cowl hood , small ducktail spoiler , painted trim instead of the black one and plastic side windows , also has chrome tips.
Interior has Sparco Corsa black suede front seats , no backseats and a rollcage , and car weights 3346 pounds / 1521 kg.
First run , 9.48. Then 9.54 with 3.27 final ratio and a 9.52 with 2.73s. I'll tune the gear ratios or maybe I'll switch to a Powerglide trans , I was expecting better times than mid-9s from a 1300+ hp turbo fox.
Added 2 minutes later:
@Marcus915 : So , what pistons have you choosed ? JUN or HKS ? :wtf:
so the stagea smashed a piston out the side of the block so now im looking for either a rb30 bottom end or a whole new engine any recommendations?
Go with a full Stage 4 RB26/30 😃 And then put a small turbo in top of it , and expect like at least 600 hp.
Powdercoated my headcover, so its the same color as the Stang. I also sanded the SHIET out of the Sileighty, and primered it. I bolted the wing onto the vehicle. What color should I paint the car?
Well this thread went from tame when it started, to more in depth with some minor realism, to look I just bought a car and same day I put 1000HP in it oh and I sold it the next day.
So what's the limit of modifications per day ? 🙂) It's a fucking game :rolleyes:
After weeks of searching for an S chassis, I found this crap of an S15. Clearly, it had a rough upbringing.
Every panel had a scuff, scratch, dirt, rust and dent, the interior was gutted, front frame is kinda twisted, only the front windshield attached and it was sitting on all sorts of factory wheels. Its listed on a Japanese auction site and currently a representative of mine over there is sealing the deal for me on it. Trouble is, I dont really have the space for it right now as the garage at my place already has my subie and my girlfriend's turd. Im wondering if there are any shops out here that are willing to ship and store the S15 for me while I clear the garage. Also, Im wondering if the said shop is interested in the build planned for the S chassis.
Slightly off topic, my girlfriend is trying out this new vegan diet to try to get my pants all hot when I look at her (this is actually true this). Even though I repeatedly say that she is fine the way she is right now, she ordered a delivery of vegan stuff and organic things which I will never comprehend of what they are. About half an hour or so, her delivery arrived. I dont know about you guys, but the delivery vehicle looked kinda familiar to me. (rather disappointingly, this isn't true)
Lost Escort: Part 1
2 months later I got a phone call from my dad. He told me that a friend of him bought an old farm and found something interesting in the barn. I got there and I saw my dad and his friend in front of a barn. Dad was like: "You're ready for this?" And opened the door. I saw a small red car buried in trash, dust and what not. "I don't know what it is yet", said my dad's friend Eddie (Who bought the farm) and so we dug it out. After a while we saw the front of the car and I recognized the unusual shape of the front grille: It has the shape of a bone. More digging revealed the whole car and confirmed my first thought: It's a 1st gen Ford Escort. RHD car which is unusual here. We towed it out and boy those tires were cracked and flat. After a while we found out that the car must have been from the UK since it has a mile speedometer in it. Tried to crank it but nothing happened of course. The car was last on the road in 1982. Eddie was like: "You want it, John?" I said: "Sure, I could use a car like that."
I didn't have my cam with me but I'll take a pic as soon as I got it home.
@Haku: It was like that in the beginning, too. XD Super quick builds, every day another car and so on. But I should keep my mouth shut with an overpowered car as a beginner's car which is utterly unrealistic in the second thought
@dxg: Watanabes on a Mustang? Umm... Wouldn't Torq Thrust wheels or something like that more suitable?
i have an extra bay with a lift over here at my shop.
@Tom Diablo, Torq's are EXPENSIVE. The Watanabes were already here, from the Corolla. Their temp till I can get some rims idgaf about and bash up.