VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

# marcus915 :
It's not that I need a limit in my life (i don't), but the space in my garage just can't accomodate much more than 5 or 6 cars. That, and with my drifting, costs run high with tires, repairs, the occasional big crash, and it eats away at my bank account hahahaha

You can store cars at my shop if you need, we have some back room space.



   
soren123
(@soren123_4890)
Estimable Member
Joined: 14 years ago
Posts: 121
 

# ThatBoostedGuy :
Just picked up this BEAUTY of a pre-owned Supra. What should I turn it into?
(Ignore the man sitting in my car, I forgot to disable it.)

Also my first post on Vstanced. I'm new here. :3

Really nice car you got yourself! I'v just build a fairlady 370 Nizmo with the same engine just with some modifications!
Go and check it out! http://upload.vstanced.com/album/vQ



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

Sent the supra off to have the rollcage fabricated and installed. In the meantime I need to get the Camaro out of the shed and swap in the LS3 crate motor that arrived today 🙂



   
Driftphantom
(@driftphantom_6153)
Honorable Member
Joined: 13 years ago
Posts: 650
 

Currently, this is how the m3 is sitting. Got my broadway statics on..

and maxed low haha. tucking incredibly hard in the rear and rubbing the front silly. I went and picked up some rear camber arms so those may get thrown on here shortly so I have some adjustability in the rear. the front came with adjustable camber plates. BMW of North Valo has some m3 CSL panels In for me so tomorrow expect those to be getting fitted and some fender work. I am looking to pick up some wheels to do some testing and fender rolling for tomorrow anyone got a pair of 18x10s for sale? lug pattern is 5x120



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

-->3 months later<--
I finally got the VR6 turbocharged. It has really low boost (0.3 bar) so I won't mess up the internals and got it dyno'ed: It has almost 350hp now. Because of that I've upgraded the brakes on it (nice brembo kit) and checked out a 1 mile long drag strip in east Valo. I'll post the time sheet, too.

Don't worry the intercooler isn't lower than the oil pan. Need to cut a bit on the bumper, tho.

Just a sticker and a remus muffler because the stock one was too small and rusty, too.



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

# Haku :
You can store cars at my shop if you need, we have some back room space.

Sweet, I could use the space haha.

Got pretty much all the parts off the wrecked Miata, and got them all onto the Mariner Blue chassis. Motor is going to go back in next, but it will be refreshed and given a little extra uumph in the form of a snail 😉

When I gave the Rotiform OZT's back to the friend I was borrowing them from, he let me know of an offer that sounded really good, so I went to go check it out. The guy was selling a set of Yoshihara Champions in 18x10 spec, for $2000. I could not turn down this offer as I have always wanted Champions but didn't know where to buy them.

Being 18x10's these are a step up from my previous 17x10 Rotiform MHG's so a little bit of adjusting was needed to get the 18's under my car. Fortunately I didn't run my 17's at a super low height so the 18's fit with just the tiniest of height adjustment.

the fitment is on point now, just a little rubbing under full load or when it squats exiting out of a corner.



   
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

# Tom Diablo :
Hi! I'm Jonathan but you can call me John. Most folks do that. I am originally from Colorado where my dad has a big-ass farm. I recently moved to Valo and got my new driver's license and new plates for my car. I was actually amazed that this old car would pass the emissions test!

This is it: A 1994 Corrado VR6. It's my first car and I take good care of it. It has a few rust spots here and there but it runs and sounds amazing. My plans for it? I will turbocharge that 2.9l bad boy. Already has almost 200hp but there is always room for more 😃
But it's not my actual project. Where I came from I am known for doing crazy builds

why do you have a VR6 (!) corrado for your first car, it's too powerful. Second
why are you known for crazy car builds when it's your first car
makes no sense

but the pictures are nice, you've imporved



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

1:Why the f* not? There are kids with muscle cars or big-ass BMWs out there! (What about the Cuda 340 from a previous RP? Noone gave a flying fart about it)
2:I built cars for 2 of my friends so technically they weren't my cars but let's not be picky, okay?
3😃anke 😃 I use the V2 of Coprone's ENB but I kinda like the shade effect of the V1



   
NikiLauda
(@nikilauda_7307)
Trusted Member
Joined: 13 years ago
Posts: 83
 

@Soren123 : F&F replica!

Just done the suspension overhaul. MrSir arms , Optima Drag shocks and springs , Wilwood brakes and 15" Centerline (didn't go with skinnies and full slicks because it's not a track-only car , so I will drive it from box to races and vice versa) wrapped with Bias Ply tires. I did a run and the result is a 14.93. IMO the 2.73 gears kill the performance more than the AODE himself. I'll try with 3.73 and 4.10 but then I'm going to pull the engine off (Make an offer , consider it for sale. Bone stock except an air cleaner , 46k miles on it , comes from a daily driver , just a couple of passes on it. The AODE trans and the converter are stock too and included with the engine).



   
Z0om3r
(@z0om3r_2307)
Active Member
Joined: 14 years ago
Posts: 18
 

Just got back from the track 😃 My Renault 12 is not that bad but it still needs some work done to be more powerfull. Does anybody know a shop from where i can get some new engine parts for my Renault's Inline 4 ?



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

Should I try to supe up the ohv 3.8 v6 in the stang now. Or should I put my orphaned 2JZ-GTE into it? Or a 4A-GA?



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

My current SLRR version decided to shit itself and break. So, in the sake of this thread. Let's pretend my house and garage burnt down at the exact same time and destroyed the cars, and killed my character. Sooo... Time to get a new SLRR version and make a new character. Pretend I have never posted here before...



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

@dxg: You can have my 4A-GZE for 800$
@BoostedGuy: You cold just write that you had to restart your RP because SLRR went to hell and back; A hellfire burning everything down is kinda overkill XD



   
Z0om3r
(@z0om3r_2307)
Active Member
Joined: 14 years ago
Posts: 18
 

Finally found a good engine and just came back from the track where i tested it. Only 4.2 seconds from 0-100km/h and got 9.2 seconds at the 1/4 mile track 😃



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

NEW RP STARTED

Took my two cars out last night. My bone stock Supra and my 800hp R34. The R34 is going to be sold as it has some major engine problems and it's too much of a pain to have around.



   
Page 343 / 541
Share: