Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Hey guys!
So I finally got some news about my cars that got shipped to Japan, but they're not so good.
So, my cars, after arriving to Japan, they went Jorge aka Ward's house so that I know they are in a safe place. When he told me they arrived, I asked him if they started since the cars were shipped with all their fluids. He told me that they did start but very roughly and they were undriveable because they would die out. So I asked him if he could connect his laptop to the ECU and then I could see what was happening with them via TeamViewer, but he didn't find the ECU's. They were stolen.. I don't know how or where, but they were probably stolen while the car was sitting on a container, unlocked before going to Japan. Too bad that they both are protected by passwords and thank Harambe that I've insured the cars and their extras in case something bad happened to them. So now I've got to get new ones, flash them with the tunes I got backed up in my computer and drive them in Japan.
On a lighter note, I got a Originlab kit for my GS300 from Japan for about 900V$ and another crate with some special parts for the engine that you'll find out next week or so. I got shipped to the shop where the car is sitting and my mate installed them for me and got the old ones sold so he pretty much payed for his own work.
The car is look so sick, take a look
After I get the engine turboed' and forged (SPOILER), I'll be painting the car with the dark gray that is on the skirts because I think it will make the wheels pop out more.
Sorry for the big update,
See ya!
Spoiler: - 900V$ Origin Lab kit
+ 1600V$ Monthly salary
Total: 16.910-700 = 16.210V$
Looks good with that bodykit! But i think you should change the rims for a more aggressive look. I turboed my Mazda too, i'll need you to tune the ECU so that turbo will run at its full potential. 😉
Hello guys, it’s been quite a while (two and a half months).
So, a lot of shit happen in the course of these weeks, and I got a lot of stuff to tell ya so, grab some popcorn while you can.
In the first 2 weeks I’ve been working on my GS300, finishing the build of the engine and twin turbo-charging it. Also, I decided to paint in the same grey colour as the bodykit parts were because I was kinda sick of the silver.
I’ve tuned it and it makes similar power as my Toyota Gita, which was not bad at all.
When I’ve arrived in Japan, the first thing I had to get sorted was my cars’ ECU’s since they were stolen while they were waiting to be shipped to Japan. After that I started buying some parts for my drift project 180SX and they were some gauges to see how the engine was working and also an electronic boost controller from HKS. I got a simple stereo because the stock one didn’t work at all. That was around 500V$.
I also got some Bride seats, Bride interior and D-Max floor mats and that was all 4000V$.
To conclude on the 180SX chapter (for now 😉 ), I got the D-Max hood painted the same colour and re-installed it.
The car looks so fucking awesome I don’t have words to express how much I’m enjoying working on this mint 180SX.
Well, when I was waiting on a big shipment of Haltech material, I had to get a car to drive around, because none of them were working, because they had no ECU. So I started searching online for some cars and saw a 1991 Subaru Legacy RS “Turbo” with an N/A EJ20 with 185k km’s for 1500V$ and since I didn’t found anything else and I thought well, this will do the job.
It was a cold night in Osaka and I couldn’t see shit when I went to buy the car but the pictures actually came pretty good. You can see the bumper were all about to fall and dented but I said fuck’em since It drove pretty good and for the price, I couldn’t complain.
So I got it and in the following weekend I bought some colour-match paint, bog, zip-ties and some trims and got the job done and it looks pretty good, for the price (60V$).
I still haven’t took my 180 to a drift event, but that is not a problem in here, since there is a lot of drift tracks nearby, but I need to do a retune since they is fuel with more octanes that in Spain.
Tomorrow, I’ll be flying to Portugal to spend Christmas and New Year ’s Eve with them and have a nice drive on my GS300.
Sorry for the long-ass update but sooner or later, it had to be done.
See ya! Happy Holidays!
Spoiler:
Gita:
Paintjob -500V$
Turbo kit and Forged internals -2000V$
180SX:
Gauges, HKS boost controller and Pioneer stereo -500V$
Bride Seats, Bride Interior, D-Max floor mats -4000V$
D-Max hood paintjob -200V$
Legacy:
1991 Subaru Legacy RS -1500V$
Miscellaneous shit for Legacy paintjob -60V$
Two month salary + Christmas bonus +5000V$
16.390-3.560 = 12.830V$
Finally, you are in japan now we can destroy our beautiful 180's for that I need to finish mine :^(
# Ward :
Finally, you are in japan now we can destroy our beautiful 180's for that I need to finish mine :^(
YES!
Hey guys, HAPPY NEW YEAR!
So, in the past weeks I’ve been with my family in Portugal until New years’ day and flew back to Japan in the 2nd of January so I could “fix” my jetlag. Whilst I was in Portugal, one night I got pretty drunk and was with Jorge so he somehow convinced me to buy his Skyline R32 GTS for 900V$. I only found out I bought it when I’ve arrived in Japan and got a text of Jorge asking when I was going to get the car.
Well, I didn’t had no plans on the Skyline, but I was looking online to see if I could trade it for another car, preferably with a 2JZ-GE so I can sell my Gita with that engine. And I found one, it was a Nissan Silva S14 Zenki which I personally don’t like that much, but the looks of it started to grow in me.
It is pretty stock but has a 2JZ-GE auto. I’ll be swapping with the 2JZ-GTE from the Gita and sell the Gita, which Btw, if anyone is interested PM me. Since I’m selling the Gita, mind as well get all the good bits out of her, right? So I set about taking the coilovers, brakes and wheels and put them all in my daily, the Legacy RS.
The car looks pretty good with them, but I will probably paint them white. The Gita is sitting in the Garage, waiting for me to get time to swap the engines with the S14 which I drove about 200kms with it and it feels pretty good.
This past Saturday I went to an event in Naikai with Jorge and Abi and I’ll tell you all about it in the next update, which will be pretty soon. 😉 I got pretty shocked about the power that my 180 has under the hood because it was never been tuned properly.
That’s all for now,
See ya!
Spoiler:
Nissan Skyline R32 -900V$
12.830-900=11.930V$
You are welcome bro for the skyline
Man those are all cool cars man! I live in Japan to. Maybe we can do a meet sometime? And how much would you sell the Altezza Gita for with all the parts you want off of it?
Interested in any Gita parts you might have ! Spares never hurts, where you staying at ?
# FastCars :
Man those are all cool cars man! I live in Japan to. Maybe we can do a meet sometime? And how much would you sell the Altezza Gita for with all the parts you want off of it?
I can't tell you the price rn, but I won't sell it with the 2JZ-GTTE it has right now, sry.
# MACKAY :
Interested in any Gita parts you might have ! Spares never hurts, where you staying at ?
I'm in Osaka, and I only sell the car as a complete package, it's has been well maintained and serviced
Added 27 minutes later:
MY FIRST DRIFT EVENT IN JAPAN!
Hey guys, so last Friday me and Jorge went to Ehime for a drift day in Setonaikai Circuit and it’s a 324KM trip from Osaka. But I haven’t ever tuned my 180SX yet so, that morning I went to work with my 180 and since I had a bunch of spare time I decided to tune my beast
Holy sh*t I almost cried when I saw the final dyno number. 555kW?! (744hp). So, when I went to pick up Jorge to go to Ehime, I really felt all those kWs. Before that I got some crap tyres to some R34 rims that Jorge got us. When we were on the highway I decided to do a pull on my beast 2JZ and Jorge, with his SRCancer (sry for all SR fans, I also like them but compared to the 2JZ it’s nothing), couldn’t keep up and I had to wait for him in a fuel servo and decided to fill up the car
We left Osaka at 8pm and arrived at midnight on Abi’s place where we crashed for the night. The following day, we woke up at 5am #teamnosleep and left to Setonaikai at 6am. We arrived there at 8 and I installed the R34 tyres and saw how shitty the fitment looks. It’s so bad I cringed every time I looked at it.
It was a pretty good drift sesh but unfortunately I tapped Jorge’s car and broke some clips and the bumper got smashed.. Ups!
Even though it was the first time me and Jorge met Abi, we became really close friends and that’s when we created WESTKYO, our drifting team.
Spoiler:
Crappy tyres -90V$
Fuel + Track entrance -250V$
11.930-340=11.590V$
Hey guys how's it going?
So, I've been away of this roleplay thing for 20 days mostly because of school which is a real pain in but but let's get to the update it self
Ok, Jorge, Abi and I decided to make a team paint colour for our drift cars and it was decided to be a R34 blue but I has gained a big crush on the Evo X electric blue. And after getting the colour I went and painted my 180. It looks so fucking good.
Since our drifiting team has lots of cars, my and Jorge's workshop wasn't enough. So, we went garage hunting and found one for pretty cheap actually. It is huge and it came with a car lift, which is pretty useful. I was searching online another wheels for the 180 when some Nismo LM's popped up online and I couldn't miss it, for just 400V$! And here are some pics of the car with the wheels.
I love it so much. Oh yeah, and I finally sold my Altezza Gita to a side of the road car stand for 3500V$. So, I got the engine swap and some other goodies in the S14, but that's for another time 😉
Spoiler: Car Paint Sorcery -300V$
Nismo LM Wheels -400V$
Toyo tyres -300V$
Monthly salary +1900V$
Toyota Altezza Gita +3500V$
11.590+4400=15.990V$
Nismo LM's for 400 where do you find these man