VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

Notifications
Clear all

[Closed] V$ Doms RP Drag Racing Garage (Please lock, thank you)

95 Posts
8 Users
0 Reactions
41.4 K Views
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter   [#2358]

Hey! My name is Dom, and I'm a student in Palmdale, CA. I have been saving my money since the age of 14, and have brought myself to V$20000.
I began searching around junkyards and used car lots, and I found a FoxBody Mustang. No pictures yet, but I will contact the seller for a few later, or I will wait to get it home if I buy it. He wants V$1500 or best offer, and I am trying to work him down to V$1200. The car is an incomplete roller. It is missing 3 wheels, 1 brake rotor, a front quarterpanel, the front bumper, one taillight missing, and the entire floorpan is also gone.
As of now, I am pretty close to closing the deal and V$1200, but I'll have to see.

Added 59 seconds later:

Also the entire interior is gone. No seats (missing floorpan)and no steering wheel

Spoiler: V$20,000+V$375 (Weekly Pay)
Current Balance
V$20,375



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

Okay, the seller sent me some pictures (sorry if they are super bad quality, my TGA pictures are empty, so they cannot be converted, I had to use win+prt-sc)

Spoiler:

Added 17 minutes later:

If everything goes according to plan, I'll pay the guy tomorrow, and tow it back with my buddy's trailer and pick up. I think I am going to gut the car, and get it fabricated by a professional. I will have them make new front bumper mounts, fix ANY holes, and fabricate a new floor pan. Should not cost me more than V$4,500, but I am not completely sure. In 1-2 weeks, I should have the car back in my garage. I have a makeshift paint booth, with primer, sand paper, and the color I want.



   
Mr_Stance
(@mr_stance_24659)
Noble Member
Joined: 10 years ago
Posts: 1302
 

Mane , that stang isn't worth to spend 5000 or 6000V$ in it.
For that money or more you can buy an 05 mustang v8 or an V6 and swap the gearbox

I searched "ford mustang" in Craigslist , and i found some gems more interesting for your money

SN95 Saleen Supercharged : https://losangeles.craigslist.org/lac/cto/d/2003-supercharged-saleen/6621139006.html
2010 Mustang GT 5.0 : https://losangeles.craigslist.org/lgb/cto/d/2010-ford-mustang-gt-premium/6616218327.html
1990 Twin turbo built Foxbody Notchback : https://losangeles.craigslist.org/lgb/cto/d/1990-notchback-mustang-50/6621056666.html
SN95 Mustang V6 5-speed manual : https://losangeles.craigslist.org/lgb/cto/d/ford-mustang/6620862661.html
2006 Mustang GT : https://losangeles.craigslist.org/sfv/cto/d/2006-mustang-gt/6611054086.html
1989 Ls swapped Mustang Notchback Foxbody : https://losangeles.craigslist.org/lac/cto/d/1989-notchback-mustang/6620351767.html



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

I don't plan to put more than 4000 grand in it, or at least in the near times. I'm going to buy one more car, while I am building the fox.
That twin turbo notch back you have right there is bad ass. It needs some work, but nothing that I can't handle. The whole motor set up is 6798, but the car is seven grand. ??? I might just buy the car and swap it over as a donor car. Or just take the whole car. Hmmmm...
Well I have to go pickup the new fox, it is about 20 minutes away.
Also, could your shop re-fabricate my fox that I am buying?? Your shop says you do fabrication. If so, I'll talk to you when I when I have the car %100 gutted.
Cheers!

Spoiler:
V$20,375-V$1,200 (Fox Roller)
V$19,175-V$25 (Using buddy's trailer and pickup)
Current Balance
V$19,150

Added 8 minutes later:

I might go pickup that tt notch fox tomorrow. It is super nice, and I doubt it will last much longer. 7k is super low, but I'm going to try and negotiate the price anyway.
Might try for V$5,000, but I doubt I will be able to get it below V$6,000



   
Mr_Stance
(@mr_stance_24659)
Noble Member
Joined: 10 years ago
Posts: 1302
 

Ok , I can repair that car
Needs :

  • Floor work
  • Body work
  • Engine (idk if the car got an engine)
  • Suspension work (control arms , coils , etc)
  • Brakes
  • Interior work

Is almost a new car , you will pay more than expected , i don't recommend you repair that car to stock form , If u want to make this car a track car/restomod/drag car , Then the car is good for that , because we can fabricate the floor ahd some pieces more easily , because the car doesn't got that parts
But if u want to repair it to stock form , Isn't worth

Added 2 minutes later:

And that notch is beautyful , Maybe i will go to buy the Ls one , idk , i have too much projects



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

I just want fabrication
Holes patched and new floor pan. I'll give you the engine bay separately so you can make bumper mounts



   
Mr_Stance
(@mr_stance_24659)
Noble Member
Joined: 10 years ago
Posts: 1302
 

Ok , you will make the rest ?



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

Yeah I'm prob gonna pick up the tt notch tomorrow. That LS one is sick too. If I were you, I would pick up that LS one, I rarely see LS mustangs for sale (at least that cheap)
Also, the fox will be a drag car, I'm just gonna take it real slow. I wanna turn it into a 8 second car, maybe even less. Right now, I'm gonna spend 4 grand on new panels, and the fabrication.
How much do you want for the floor panel, bumper mounts, and the holes? Where in the U.S is your shop? I'll have the car stripped tomorrow (the suspension was sold already, the ad said it was still there, but someone had already bought it). There is only a hood, windows, one quarter panel, a trunk lid, and doors. Everything else is gone. Should take me all night, but It'll be done tomorrow. I'm in LA county.
(BTW are you hiring? School is out so I can work 40 hours a week, and I have a work permit.)

Added 1 minute later:

Yes I will do the rest. I will find panels from partouts, some stuff I will buy fiberglass or carbon fiber (only hood and doors if carbon fiber)

Added 9 minutes later:

Damn it
I'm 17 and I have to be 18
That sucks I only live like an hour away
Could you still hire me? I just graduated from high school, so I am not in school anymore, but I am still 17. I can legally work 40 (max) hours a week

Added 57 seconds later:

Also, I'll drive the car down tomorrow, when do you guys open?



   
Mr_Stance
(@mr_stance_24659)
Noble Member
Joined: 10 years ago
Posts: 1302
 

Okay , No problem
You are hired. (i will correct the workshop ad)
The workshop is in torrance ...

It depends, the work depends on the material to use, hours to invest and the rest, so as not to make illusions, the cost will be said at the end
We also spare no expense

Added 32 seconds later:

Also if you work in it, I will not charge you for labor



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

Awesome!
Thanks for the job, sorry I didn't reply sooner (for RP reasons we'll just say I was gone because I was working on the fox).
I'll work Mon-Fri 8 hours a day. What time does the shop open?
I'll have the car in Torrance right when the shop opens.

Added 19 minutes later:

Okay I emailed the guy with the tt notch, and he said he is going no lower than V$7,000, so I guess 7 grand it is. I'm going to pick it up after work tomorrow, I will still have my buddy's truck and trailer (I am also leaving the other black fox at the shop).
It is Anaheim, to far from Torrance to go on my break.

Added 16 minutes later:

Alright, the fox is almost apart. Also, I changed my mind, I need a tubular engine bay, so I will sell the stock engine bay at my local junkyard

Spoiler:



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

I'm off to go pick up the tt notch



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

Okay, notch is at my house, I will keep it here until I decide to do something with it. Hopefully Stance will let me keep the black fox at swapper garage in torrance. I go down there everyday, so the car won't be sitting.



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

I've been gone at the track all day with the notch back, it ran 10.900's. It's pretty good for V$7,000, but it could use some work. Sadly, on my last pass of the day, I was doing my burnout, and one of the used slicks I got with the car got a small hole, and was completely flat by the time I lit up the first stage light. Had to tow it off the track, pretty embarrassing. However, I got some good data, will take it down to swapper and figure it out.
Also I forgot to pay for the notch

Spoiler: V$19,150-V$7,000 (notchback tt fox)
V$12,150-V$150 (new pair of slicks)
Current Balance
V$12,000

Added 4 minutes later:

One more thing
The few panels that were left on the black fox when I bought it were in decent condition, so I sold them

Spoiler: V$12,000+V$200 (body panels)
V$12,200+V$150 (engine bay)
Current Balance
V$12,350



   
Mr_Stance
(@mr_stance_24659)
Noble Member
Joined: 10 years ago
Posts: 1302
 

The car is ready , i will make an upload later with the final cost of the floor pan and the frontend

Work done :

  • engine bay cut
  • Tubular Engine bay fabrication
  • New floor pans with tubular structure
  • New black paint for avoiding rust

I will make the final cost.



   
DFRacing98
(@dfracing98_31125)
Reputable Member
Joined: 8 years ago
Posts: 297
Topic starter  

Awesome, thanks man



   
Page 1 / 7
Share: