VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ ShadowTuner's Ro...
 
Notifications
Clear all

V$ ShadowTuner's Road to a StreetRacer

27 Posts
4 Users
0 Reactions
11.7 K Views
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

Got a full week off due the low ammount of work. Wich means a full week of work on the car ( mostly patching up stuff wich doesn't require ordering parts.

What does Le Shadow done allready?

Patched up the body, grinded down all rust, welded up holes and bondo'ed all dents and pulled the engine.
A one day job as they say.

What does one still have to do?

Undo the horrible welding inside and underneed the car, remove all junk ( read rotten wires and the kind of shit ) from the inside of the car.

What did Le Shadow ordered?

New headers/headgaskets, small suspension parts ( bushings, tierods and lower suspention arms ), new engine mounts and i placed an order on the local junkyard for a dashboard since this one looks like it was shewed up, shitted out and formed again to something that looks like a dashboard.

The suspensionparts should be here around monday. Got shit to build and i'm damn happy about it.

Spoiler: Budget: 12500 V$
Bondo and sandingpaper: -50 V$
Headers+gaskets: -500 V$
Suspensionparts: -650 V$
Enginemounts: -150 V$
Current budget: 11250 V$



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

Aight, a week has gone by and i did a few things to the Chevelle.
To start i finished up the bad welding ( cut it out and welded in original parts wich i cutted out of a floor of a wrecked SS on the junkyard ) and did more bondo and primering. Nothing real worthy to make pics of.

Monday = partsday

The suspension came in. For once everything was in the package so i could build a first setup. Now keep in mind, this is a temperary setup because i'll go dragracer ( read: shocks, springs, crossbars etc )


Now i can see you thinking. RIMS AND WILWOODS????? YES is the answer. Did i bought them? NO, i borrow them from a co-worker. ( Dont ask about the collors, i gave the 4 rims that were on SS back to the junkyard. )

Junkyard = partsparadise

As i previously said, i ordered a dashboard on the junkyard, they would call me when a chevelle came in with a good dashboard and my luck is on the high end these days. Not only the dashboard was in very good condition, the entire interiour was in good condition. Since i ordered one, i got the first pick on it.
Came home with a Omni filled up asif it was an 18wheeler 😃
Dashboard, doorpannels, floorcarpet, rear pannels, roofliner+vinyl, carpets and so on and on and on.

Tomorrow = Workday

I got to haul my ass back to work tomorrow. That means the works on the Chevelle are slowed down again. Still waiting for engine parts wich will take some time. I'll jump in at the local rollcage builder to see if i can get my hands on a good rollcage.

Spoiler: Budget: 11250 V$
Interiourpars: -500 V$
Current budget: 10750 V$



   
ReplyQuote
Soju
 Soju
(@soju_17961)
Noble Member
Joined: 11 years ago
Posts: 1225
 

Super clean dashboard! I never expected that!



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

Again 7 days past and i got a bit of work done to the Chevelle.

For starters, the rolecage dude came by, custom fabricated a sick rollcage for the Chevelle. You might wonder " but shadowtuner why did he came by? " Well i did something wrong with the brakes and the car doesnt move 😃.
Ahum ...
Anyway, back on the rollcage. It's a full racing cage, yet streetlegal due no crossbars behind the front seats and it's fuly detachable.

As i was waiting for the man to finish his awsome work, the package delivery company stopped by. I found set of original fenders on ebay, never painted, just a small amount of rust but hey, nothing we cant fix tho.

All went well untull Thuesday ... i recieved the engineparts and while i was trying to figure out how i was gonna install them, i figured out that the engine needs some professional love. I got no equipment to work on the pistons and rods.
Made some calls and i found a shop specialised in streetrace engines not far from the mexican border. I might drop it off there and let them make it ready to install all the mods i got in mind.

Spoiler: Budget: 10750 V$
Custom made rollcage: -850 V$
Fenders: -150 V$
Current ballance: 8750 V$



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

IT HAPPENED

I blew the engine ... More specificly, i blew piston 2 and 3 straight through the hood, piston 1 straight down in to the ground underneed the engine and the other pistons are somewhere inside the engine.

NOW WHAT?

I managed to arange with my boss i could use one of the worktrucks. Nothing special, just a small block extended cab GMC ( unless you like a dirty, beatup and busted GMC tho ).
I can use it a for a week but i allready absolutely HATE it! It's slow, huge and broken. The search for a temperary beater has allready started.

Spoiler: Budget: 8750 V$
Towexpences: -100 V$
Current budget: 8650 V$



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

The truck ... THE FRICKING TRUCK had to go! Got sick and tired of it X-(
I found a beater tho, a Silvia S13 with damage. The kid i bought if from said " i spinned out ".
Anyway

THE SPECS

Like i said: An Aztec Red 1990 240sx S13 with charcoal gray interior ( read seats ). Yes that is all original, the paint is a bit worn off by the sun.
Previous owner did some good things to it tho, it has a Keyis Racing steering wheel, Bride pannels, roofpannel and floormats in it, wich are a good to even allmost new condition.
It has a bonestock 2JZ-GE in it with around 150K miles on the clock, he only replaced the cooler with a real HKS intercooler cuz the stock one was pissing liquids.
It runs on H&R Street Performance coils and shocks, original teardrops and BFGoodrich G-force sports.
Last but not least, it has one hell of a loud farcan underneed it wich will be thrown in the trashbin ASAP!

WHATS WRONG WITH IT?

Honestly? Only the left front camplate shattered, gonna cost me around 50 V$ for a plate.
Besides that not realy something that needs to be fixed before i can use it on the road.

WILL YOU KEEP IT?

I honnestly dont know. IF it runs good i might aswell keep it because it's MPG will be drasticaly lower than the Chevelle and the Omni. But in case of me keeping this beater, the omni will be sold and the money will be used to patch up the s13.

YOU GOT PICS?

Yes i do.




I bought it for 400 V$. This was bought with the money i use for the Chevelle

More updates on the Chevelle will be uploaded on the usual day of the week.

Spoiler: Budget: 8650 V$
Bought the S13: -400 V*
Current budget: 8250 V$



   
ReplyQuote
Soju
 Soju
(@soju_17961)
Noble Member
Joined: 11 years ago
Posts: 1225
 

only 400 for the missile S13? That's really cheap



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

# soju357 :
only 400 for the missile S13? That's really cheap

Exact the same what i was thinking. Eventhough it looks fine, besides the left front wheel, im going to inspect the car when i got time.



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

Been a while, longer than i wished it was tho but hey, here we are again.

THE CHEVELLE SS

Engine's in at the engineshop, that's all i can say because that's all that changed since last time. I'm scouting the internet for parts but so far nothing realy cool popped up that was affortable.

THE S13

I did a rundown on the bugger, turned out just a bent tierod ( or how ever you write it ) so that was an easy fix, found a stock one in the garage 😃.

Spoiler:

Ofc i did a beatdown on it to see if it acts funny. Nothing weird, beside a bit of wheelhop on the rear right wheel.

Spoiler:

SHIT WENT WRONG

The only damn thing i didnt checked was the quality of the tires... And guess what? Popped the left front tire.
Broke the fender and the front bumper even more.

Spoiler:

SHE'S BACK ON THE ROAD

Fast ordering like an adict buys crack, Ebay was my friend last friday.

Spoiler:

That's all i got... Not gonna make the RP about the S13. For now she's just a beater that brings me from A to B. The fender and bumper were 50 V$ each, i opened up my old piggybank for that.



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

Dear god it's been a while ๐Ÿ˜ฎ

Let's dive straight in it!

The Omni, What's up with that?

Well i had an opportunity wich i simply couldnt resist. I saw an add on the webs about a set of brand new American Dragstar rims WITH! Goodyear Dragsemi slicks on them. Contacted the seller and offered him the Omni ( i was joking at first ... ) and the dude instantly said YES. Turned out his passed away dad used to drive one of them, not just a regular one but a Saleen edition. His plan is to restore and rebuild my Omni in the near future. Allways glad when i see a car end up having a good future.



The look so sexy on the chevelle <3

The Chevelle. WHERE THE FUCK IS THE ENGINE????

Well, it's right here.. Brought it back home yesterday ( yes that's why i update this RP ). The guys over at Dosanto's Street Mods aka DSM did one hell of a job! The completly restored the engine to how it was back in it's glorydays ( including the paint and stuff ). I instantly installed the engine back where it belongs just to see how it fits and my god it fits perfect. Keep in mind, the engine and car needs to go back AFTER i installed a couple of mods to it. Just to finetune etc.

Well than mister Shadow, what's next?

Basicaly just ordering bumpers, seats and windows. I want this baby painted as fast as posible so i can work on the engine. Like said above, the engine AND car will go back to DSM to finetune and dyno it so i gotta have the exterior finished first.

Spoiler: Budget: 8250 V$
Engine restoration: - 1000 V$
Current budget: 7250 V$



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

It's gonna be a short one today guys. 3 things to talk about: Tires, Lights and Rockers + upgrades

TIRES

I found a set of matching Firestone Drag 500's for a rather cheap price on the interwebz earlier this week. Decided to take the S13 for a spin and went over the dude's place ( somewhere in 15 min drive distance from where i live ) to check them out.
They were in a MINT condition, only used one day but they were to wide for this dude. Coughed up 500 V$ and loaded them in. ( Yes it was a funny sight, more tire than car in the S13 😃 )

LIGHTS

Nothing special, i went to the local junkyard to pick up some rear lights, bone stock red 68 lights.

Rockers

Hmm i recall myself saying " The engine goes back to DSM to modify it " 10 days ago ...
Well ... i decided to try and do some stuff myself. I bought some Magnem Gold Rockers and threw them in. The only hard part was putting the right amount of torque on the screws but i managed to get it sorted out.

My appoligies for the lack of uploading, there's simply not much i can do due work and deliverance time of parts.
Im thinking of throwing the S13 in the RP aswell to get some stuff to upload tho.

Spoiler: Budget: 7250 V$
Tires: - 500 V$
Lights: -20 V$
Rockers: - 100 V$
Current budget: 6730 V$



   
ReplyQuote
ShadowTuner
(@shadowtuner_3018)
Reputable Member
Joined: 14 years ago
Posts: 285
Topic starter  

Oh boy ...
Lot's of stuff happened ... To start of with:

The Garage

As mentioned in the beginning of this RP, i was renting a small house of a friend ( and a place in his garage aswel ). Now due me being pissed as fuck i will not go further into detail but we split our roads and i found a new place WITH a sick backgarden + 3 garageboxes (See red circle at pics in spoiler.

THE CHEVELLE

Well ... that's a different story, the Chevelle was sitting in his garage during the fight wich makes it for me impossible to go take it on a trailer. I went to the police and they will take care of it in the future. Up till the moment the SS AND it's parts are in my garage, this RP will take a slight different turn.

WHAT ARE YOU GONNA DO THAN?

Well, im gonna take the S13 and repare/upgrade it. The driver's side was a mess due the crash and the exploded front tire, so i tore it appart and ordered parts on ebay.

THE S13 UPGRADES

To many pics to post for it so i'll make a spoiler with them in it. I picked up a used driverside door at the junkyard for 20V$. I went for a full supermade bodykit, found one on ebay for dirtsheap ( used ), 500 V$ for the front and rear bumper and the skirts.
Also due the crash the fenders were trash and lucky for me, the same guy who was selling his bodykit, he also had wide front fenders and wide rear bolt on fenderplates for sale. I paid 200 V$ for the fenders, add the rear lights to it for 30 V$ and my ride is ready for painting. (wich will be soon-ich, once im moved in into my new crib )

Spoiler:

Spoiler: Budget: 6730 V$
Bodykit: - 500 V$
Driverside door: -20 V$
Fenders: -200 V$
Current budget: 6010 V$



   
ReplyQuote
Page 2 / 2
Share: