VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ Rotary's RP | BM...
 
Notifications
Clear all

V$ Rotary's RP | BMW M3 E46 / AE86 IN PROGRESS UPDATED

28 Posts
11 Users
0 Reactions
13.4 K Views
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

Good Morning people !

Since i was away for a while, i needed a daily car, so i went looking and i saw this 99' Audi A4 1.9 TDi for sale.

Went to check up the car, everything seemed ok overall, has leather seats, HID headlights, etc etc.

From a little chat with the owner, he said that he done an engine swap, so the car was originally a 1.9 TDi 90hp, and he swapped to a 1.9 TDI PD130 from a golf.

Other thing he done to the car, that is ugly and riced up is that dtm backbox, but i'll replace it soon and he installed some 17" Audi rims, i think this are the ones from the audi TT.

I've already got some plans for this A4, news soon !

NOW THE PICS !!

As i got the car, i've done some maintenance like the oil and filter change, timing chain and done an overall check-up to the car, looks good.

Expenses:

Car: 3,500 V% + 500V$ (Oil and filter change/Timing change, all around check-up)

Paycheck x 5 2375V$

Balance: 46.390V$

Added 1 hour 5 minutes later:

Couldn't stand looking at the car like this ... so ... very busy saturday morning rushing from scrapyard to scrapyard and a quick stop at the local tuner shop got some parts and ...

Here's the V 1.0 of the A4 !

Parts bought:

Audi S4 front bumper: 75V$

FMIC and piping + install: 150V$

Straight pipe exhaust plus welding: 100V$

Koni Coilovers: 500V%

VW Amarok Wheels and Tyres: 350V%

Expenses:

Balance: 45,215 V$



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

Good Night !

Dome some changes to the A4.

Hope you like it !

Parts:

BBS LM 19" + tyres - 800 V$

355mm + 300mm Brembo brakes kit - 500V$

Recaro Seats - 1000 V$

Total Spent: 2300 V$

Balance: 42,215 V$



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

Good Night

Just got bored of the AUDI, and as i had an E46 M3 before and had to sell because i went away for a while, just sold the AUDI and searched for the M3.

Saw this one:

2004 M3 with 49k km for 9,990 V$

Called the guy and he could show me the car in the afternoon, so i called a friend of mine and he got me a lift to see the M3.

This was the overall looking of the car, seemed nice

A little chat with the owner and he told me he only fitted new big brakes, coilovers and the rest was stock.

Got the car for 9,000 V$.

Finances:

x3 week paycheck (415$) 1,245V$

Audi A4 (SOLD) + 4,500V$

BMW M3 (BOUGHT) - 9,000V$

Balance: 38,960 V$

PS: Got another surprise that i'll show you soon, not a full car, got only the body with some suspension parts and brakes, new project for race use.



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

Hello petrolheads !

Yesterday as i got some spare time in the afternoon, i've decided to remove those DTM style backboxes and installed two magnaflow backboxes and straightpipes aswell.

Also went to a mechanic friend of mine to do a check-up on the M3, everything seemed fine, asked him to tweak the coilovers the car bring, and decided also to do some "bodywork" as he works with vinyl and he tints windows, got the windows tinted and blacked out the side and front grills and debadged the M3 in the trunk

Already Lowered

Blacked out (final result)

As for the "Surprise", here it is !

It's an 96' Mitsubishi Colt that i've bought from a guy who had it in the garage, kinda like an abandoned project.

Bought it with the supsension and brakes fitted and wheels aswell.

Just done some bodywork to it, wide fenders, the front ones just done it today and the engine was fitted this morning.

I'm not telling much details about the engine, i've decided to apply an Honda K24 engine because it was cheaper to mod than an mitsubishi one and i guess it will be more reliable.

Finances:

Magnaflow backboxes + straightpipes - 500 V$
Check-up + Suspension Tweak (Lowering) + Window Tint and vinyl - 500 V$

Mitsubishi Colt Undone Project - 500 V$

K24 Engine + Parts - 2,900 V$

Tyres + Wheels bought (not revealed yet) - 1,500 V$

Balance: 33,060 V$



   
ReplyQuote
Snowyy
(@snowyy_24467)
Honorable Member
Joined: 10 years ago
Posts: 551
 

nice



   
ReplyQuote
JF1
 JF1
(@jf1_12736)
Noble Member
Joined: 12 years ago
Posts: 1166
 

I agree with the statement above.

Added 35 seconds later:

Was there a engine in there already? If so; how much?



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

# Jfernando1 :
I agree with the statement above.

Added 35 seconds later:

Was there a engine in there already? If so; how much?

There wasn't an engine installed on the car, i've built it myself with some help.

As for the Colt, with 3k V$ was finally done.

Rollbar, strutbars, seats, dashboard etc ... here's the end result.

BTW: Currently for sale ! 25k V$

Finances:

Overall Build on the Colt: 3,000 V$

Balance: 30,060 V$



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

Hello again, and happy new year !

As you can remember from the last post, i was selling the colt i've built, and its gone, not for the value i was asking but at least i got rid of it fast, so it went for 17,000 V$ !

I've decided to do a few changes on the M3, since it's a daily car i didn't wanted to do major thing in the engine, so i've installed new backboxes, they look more low profile and got an carbon fiber air intake and got a carbon fiber head cover aswell.

As for the interior, got some recaro seats and an aftermarket deepdish steering wheel.

Exterior, did some major changes, enkei wheels in grey, painted the brakes in yellow, carbon fiber rear diffuser, roof and front spoiler, M3 CSL trunk, and other few things.

PICS AS YOU LIKE !!

Hope you like what i've done to the M3 so far.

And as for 2018, i got myself a gift a couple a days!

I was cruising downtown, when i got with this deadend and i saw an AE86 in a driveway, seemed like abandoned ... so i stopped the car to check on the car and i saw an oldman sitting on the porch and i went to talk to him, asking who's car was that.

Was his car, but due to health issues he couldn't drive anymore and the car sat there for more than over a year parked in his driveway.

So then i asked if he would sell it, and we made a deal for 1,500 V$ !! 😃

I inspected the car carefully, and seemed to me that the only major issue is the rusted/worn paintjob and some missing parts that he told me that were stolen, checked up the engine real quick and seemed ok.

As for the interior, it looked mint, just a little smelly but ok.

So i got the car running after a few tries and seemed to run nice but def needs some major check and maintenance.

Here's the pics of the AE86

WISH ME LUCK ON THIS ONE !!

Finances:

Spent on the M3: -3,500 V$

Toyota AE86 purchase: -1,500 V$

(4x 425V$ weekly paycheck) +1,700 V$

Colt sale: +17,000 V$

Balance:

43,760 V$



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

Good morning !

Went down to my friend's shop with the AE86 to get the oil/filter change and overall check-up as i didn't had much time to do it myself at home.

Installed this HKS Cold Air intake.

I've decided also, as i got some time free, to start stripping the interior ...

And here's the end result of that.

Then, finally went for a test !!

Flat out in 4th !! Sounds nice now !!

Finances:

Weekly paycheck:

+425 V$


Expenses:

-100 V$ - Intake
-50 V$ - Check-up and maintenance


Balance: 44,035 V$



   
ReplyQuote
rOtary
(@rotary_1357)
Eminent Member
Joined: 15 years ago
Posts: 34
Topic starter  

More progress done !

Crappy paintjob but at least it's better than rust, removed the moldings and sideskirts and got plastidipped !

I've installed the OEM air intake back again and dyno just to compare the numbers since i've done some work to the engine now.

128HP and 125NM.

So i've ordered some parts that arrived this morning to a mechanic friend of mine that was going to do a little tweak to the AE86.

  • Toda Full Exhaust (Header, Pipe and Muffler)
  • Install again the HKS Cold Air Intake
  • Little Tweak on the ECU and Fuel system (8500 RPM)

That's all for engine work for now, as the end result of the dyno ...

140HP and 133NM

As for the interior, got an Air/Fuel Meter, Apexi controller, deepdish aftermarket steering wheel and stripped the gear knob

That's all for the day !!

Finances:

Expenses:

  • Toda Racing Full Exhaust (NEW) - 2000 V$
  • Apexi Controller - 200 V$
  • Tweaks - 200 V$
  • Plastidip - 100 V$
  • Work - A Case of beer

Balance:

41,535 V$



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

sweet



   
ReplyQuote
Dr_Zoom
(@dr_zoom_29425)
Member
Joined: 9 years ago
Posts: 1110
 

Sweet AE86!



   
ReplyQuote
StratoWolf
(@stratowolf_23870)
Prominent Member
Joined: 10 years ago
Posts: 747
 

Zenki Levin rear lights, Kouki Trueno front bumper

Umm...



   
ReplyQuote
Page 2 / 2
Share: