| Author | Message |
Sleepin mOnkey
Posts: 2459
Location: Japan Universe, Milky way ,Solar system, Earth Occupation: Automotive engineer Student Age: 33 V$: 14.750 |
#121 2017-08-25 09:34 |
|
I do have an sr20ve NA with some mods in my s14 if you want it i can sell it afther MACKAY stops using it
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#122 2017-08-25 12:59 |
|
It’s ok dude already bought a donor car.
|
|
MACKAY
Posts: 712
Location: Japan Occupation: Ranter Age: 25 V$: ∞ |
#123 2017-08-25 13:09 |
|
Is it what I think it is ?
|
|
Ward
Posts: 389
Location: Japan Occupation: Ｋ－ＳＴＹＬＥ Age: V$: |
#124 2017-08-25 13:37 |
# EXOTI1CSTANCE : VET is the Neo VVL version of the SR20 way more reliable but expensive since the engine needs to be taken from a Nissan Pulsar VZ-R or Lucino and Sunny more to know here *LINK* Actually the SR20VET it's only from the Nissan X-Trail GT on the Pulsar VZ-R you only have an SR16VE |
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#125 2017-08-25 13:49 |
|
@MACKAY it is what you think it is
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#126 2017-08-26 13:29 |
|
E30 Swap?!
After the 2.5 s**t itself i had to find another engine that was kinda cheap but had some power so after speaking with some people i decided to go with a 3SGEfrom the XE10 RS200. i found a cheap example that was looked after so the engine wasnt trash. The main reason was because i didnt want to go was too common yet too unique where it would be impossible to actually do it. Now MACKAY chucked this idea at me and kindly offered to help with wiring so i guess ill be waiting for you.. Now to the car Its a 1998 RS200 with the fifth version of the 3SGE known as the black top BEAMS with Dual VVT-I on both the intake and exhaust camshaft. The Manual version came with 207hp and had a J160 6 Speed gearbox. Here's some pic of the beast:    My plans for the car arent very big at all. Im going to take the loom, ecu and engine + gearbox and then probably scrap it or sell the parts. But i nopw have a donor so i can start taking it to pieces and rip the engine out. Finances: $6000 -$2000 $4000 left 4k to do a swap and stuff... Cool |
|
MrTomush
Posts: 336
Location: United Kingdom (RP: OSAKA) Occupation: Dead Age: 26 V$: Banked |
#127 2017-08-26 13:37 |
|
Can I have whole Altezza, if you don't want Altezza?
|
|
MACKAY
Posts: 712
Location: Japan Occupation: Ranter Age: 25 V$: ∞ |
#128 2017-08-26 13:47 |
|
I am coming back to Osaka on Thursday so that means I will be able to help you trough the weekend, we will get your E30 running in no time man !
 We managed to sell left over parts for more than 600V$, but mine was in kinda poor condition, so be careful while taking yours apart as it looks very clean, some parts are valuable haha. |
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#129 2017-08-26 14:31 |
|
@MrTomush I might not even sell it i dont know yet
@MACKAY we'll ill strip it carefully and leave it on jackstands. If i cant get anything off ill leave it till i get someone with knowledge to help.. Can't wait! |
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#130 2017-08-26 14:41 |
|
If you need another pair of hands, I can help.
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#131 2017-08-26 16:03 |
|
Your welcome to help if you want
|
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#132 2017-08-26 17:02 |
|
Alright, just tell me when you're going to start it
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#133 2017-08-26 17:15 |
|
Ill be starting when MACKAY gets back really. You can come help dismantle it tho?
|
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#134 2017-08-26 17:52 |
|
I can try and come today, depends where you live tho.
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#135 2017-08-26 18:51 |
|
Gunma
|
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#136 2017-08-26 21:03 |
|
Can get there in ~3h
|
|
MACKAY
Posts: 712
Location: Japan Occupation: Ranter Age: 25 V$: ∞ |
#137 2017-08-26 21:24 |
|
Same, it is six hour drive from Osaka to Gunma, @KondzixsPL where you at ? Next week I could pick you up, if it somewhere in on my way.
|
|
Lagano
Posts: 1739
Location: Slovenia West side Occupation: Taking it easy Age: 24 V$: :$V |
#138 2017-08-26 21:49 |
|
There's been a lot of 3S-GE swaps lately lol. You said that Altezza is in good shape so you can make something out of it too!
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#139 2017-08-26 22:39 |
|
I may try and save the Altezza but i dont know as of yet.. Have no ideas for it
|
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#140 2017-08-26 23:33 |
|
@MACKAY, I'm cool, I live in Nihonmatsu, 15 mins from Ebisu, thanks for caring but I'm good
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#141 2017-08-29 15:04 |
|
S13 looking how i want it..
So exterior wise i had to freshen it up a bit... So i kept the rear the yellow it was originally but in the front i went white and the underbody and engine bay went a blueish green called Caribic Blue.. (Vauxhall Colour irl) I did have to get rid of the bumper because im so low i cant use it otherwise its gonna come flying off on the highway. So i went with a custom tubed front i made from spare metal i had. Sprayed that same colour. Now kit wise i got D-MAX Type 3 kit and also a roof spoiler. Rims i got Watanabe Type A 8 Spoke's in black (14") Really small but once slammed it works well. Now moving onto the engine i got a AJS Mainfold, Diesel Turbo from a bus (think its a HOLSET HX30) Big Boost basically. Straight Pipe and a front mount from a friend. I was going to go for DET pistons but i went with Wossner Internals which i got second hand. It should now run around 350hp (hopefully) Now all i need to get is a dyno and done really. Pictures:     |
|
Soju
Posts: 1247
Location: South Korea Occupation: Smuggling Soju Age: 122 V$: Broke |
#142 2017-08-29 15:42 |
|
Dat 13 looks sexy
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#143 2017-08-29 15:52 |
|
Must mean something coming from you... Im not 100% sure on the paintwork but im gonna go for a diff colour soon enough.
|
|
JF1
Posts: 1202
Location: Europe Occupation: Unmuting trial Age: V$: J+K=£V |
#144 2017-08-29 16:15 |
|
Looks good.
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#145 2017-08-29 16:31 |
|
(OOC I want a paintjob where it looks like its been drifted.. like tire stuck to fenders and stuff) Thanks
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#146 2017-09-01 09:11 |
|
Quick Shot of the S13
  |
|
Soju
Posts: 1247
Location: South Korea Occupation: Smuggling Soju Age: 122 V$: Broke |
#147 2017-09-01 09:47 |
|
That looks sexy
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#148 2017-09-01 10:04 |
|
its a shame i cant use a bumper tho
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#149 2017-09-01 18:11 |
|
Its Done!!!
So first thing i did was to strip the 'Tezza (sorry no pics no time), ripped most of the parts off keeping them in good condition to sell on. Me and Kondie (thats his name for me since im lazy and cba to spell it) got most of it done and then waited for MACKAY to show us how its done. So we started getting the 3S out and it was simple enough, but the hard part was getting it in the E30.. Here comes the custom solid mounts in clutch since we could easily get it sat how we wanted it and just weld it up and done. So after a hour it was in and MACKAY was getting the wiring done so i was comtemplating exhausts. I decided a straight through and a E30 M3 rep muffler will do fine and let everyone hear the beauty of the 3S. (No pics of the swap since i wanted to fully concentrate on the swap going smooth) An hour and a bit later and it fired up first time. I was happy it fired up without fault however it has no exhaust just a downpipe from manifold. so its spits flames directly under the passenger footwell. Lets say i wouldnt want to be a passenger in the '30. I had to get some new rims for it as well so i got some black AVS 6's and slapped them on. Dirt cheap since i got them connections. Pictures:   I would have gone in more detail but this wasnt a month build or to say the least. it was at least a weekend since i wanted it perfect so we tested it and tuned it for a few days and it runs good. I dont really know the exact power figure but a dyno can be done soon! Finances: $3950 -$100 AVS 6 Metal was spare. = $3850 |
|
Soju
Posts: 1247
Location: South Korea Occupation: Smuggling Soju Age: 122 V$: Broke |
#150 2017-09-02 01:43 |
|
That's really nice E30
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#151 2017-09-02 13:35 |
|
Thanks man
|
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#152 2017-09-02 15:12 |
|
Hahahahah Kondie
 You nearly guessed my real name (Konrad  )
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#153 2017-09-02 15:44 |
|
I really couldn’t spell it without looking so kondie worked
|
|
Sleepin mOnkey
Posts: 2459
Location: Japan Universe, Milky way ,Solar system, Earth Occupation: Automotive engineer Student Age: 33 V$: 14.750 |
#154 2017-09-03 02:00 |
|
Awesome how thw e30 turned out
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#155 2017-09-03 18:15 |
|
managed to get $2000 from the altezza parts.. Anyone want the shell. PM me to work stuff out
|
|
JF1
Posts: 1202
Location: Europe Occupation: Unmuting trial Age: V$: J+K=£V |
#156 2017-09-03 18:24 |
|
You could sell it. Though I may start an RP at some point, so that shell could be useful...
|
|
Snowyy
Posts: 560
Location: Poland Occupation: fursuiting Age: 21 V$: yes |
#157 2017-09-03 19:33 |
|
If the mid has loadz of parts then I can take it
|
|
Sleepin mOnkey
Posts: 2459
Location: Japan Universe, Milky way ,Solar system, Earth Occupation: Automotive engineer Student Age: 33 V$: 14.750 |
#158 2017-09-04 02:37 |
|
Shit i was needing lots of alteeza bodybarts
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#159 2017-09-04 12:16 |
|
I sold everything I could but JF can have it if he wants
|
|
Zero
Posts: 1504
http://ebabe.com/urmumgettingdirt... Location: England Da North Occupation: Ford Technician Age: 29 V$: 22,905 |
#160 2017-09-06 02:03 |
|
New seats for the S13!
After noticing that the original S13 seats were trash, i found some similar style replacements from a FC3S RX7 which was being broken for parts. I got them for $60 which is good for these which are in great condition... Comfy too... Pictures:  Finances: $5850 Before purchases -$60 =$5790 This post was edited by Zero (2017-09-06 13:04, ago) |
|
This topic is locked, new posts are not allowed.