| Author | Message |
Driftphantom
Posts: 667
Location: United States Occupation: AOW Sales Rep Age: 27 V$: |
#1601 2015-02-03 23:21 |
# Haku : I just need a new transmission but how much are you looking for? And can you give me a bit more specs? Oh okay well if you are interested this is a 2jz non turbo out of a 94 lexus sc300 the trans is a stock 5spd with a stage 2 clutch and cuso LSD fit for a supra. I took the original single turbo off cause im gonna use that for a later build but I went to the junk yard and found an old twin setup from a wrecked (rear impact) supra TT the intake is the original just with an aftermarket filter in the airbox. light tune to handle the turbos. only 64k ish on the motor as It was from a wreck as well (side impact). I myself have put the last 5k on it and that was all track use and the occasional drive there and back. here is the dyno with the "new" turbines and header. I made sure to take apart and clean the turbos so they where good to go. if I remember correctly they only had about 36k on that motor, I would have taken it but it seems like somehow a rod has been through the block. I would say a smooth 4,500 for the engine and trans  
|
|
Roleplay: |
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#1602 2015-02-04 00:01 |
# Driftphantom : I would say a smooth 4,500 for the engine and trans What if I was to give you $3500 and a set of $1000 Skunk 2 coilovers  Running low on funds right now, let me know if you'll take it or counter offer, I can negotiate a bit more. Also progress, my replacement headlight came in, as well I took some advice and tried 18's, I liked them but then I had too much fender gap so put on some new coilovers that have more adjustable height. Bought Driftworks coils and I'm running them super stiff so I can't rub too much As well, I messed around with rattle cans again.  
This post was edited by Haku (2015-02-04 23:17, ago) |
|
 Do it for the ratchets |
|
Facepalm
Posts: 1486
Location: Greece Occupation: dunno Age: 24 V$: 19,175 |
#1603 2015-02-04 00:05 |
 (yes, I'm gonna do the last race as a comic. Yes, it will take a long time.) |
|
|
|
Driftphantom
Posts: 667
Location: United States Occupation: AOW Sales Rep Age: 27 V$: |
#1604 2015-02-04 02:09 |
# Haku : What if I was to give you $3500 and a set of $1000 Skunk 2 coilovers Can you swing $4,000 flat? Skunk2 doesn't fit the s chassis or else I would take that deal. btw loving the s13 @facepalm I am glad to have watched your rise to the top and ill be cheering for you on race day bro |
|
Roleplay: |
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#1605 2015-02-04 02:12 |
# Driftphantom : Can you swing $4,000 flat? Skunk2 doesn't fit the s chassis or else I would take that deal. btw loving the s13 Alright man, I'll do it. I'll come pick it up as soon as it's ready. Just let me know when it's out of the S14 
|
|
|
Do it for the ratchets |
|
Driftphantom
Posts: 667
Location: United States Occupation: AOW Sales Rep Age: 27 V$: |
#1606 2015-02-04 03:00 |
# Haku : Alright man, I'll do it. I'll come pick it up as soon as it's ready. Just let me know when it's out of the S14 The 2j is pulled and awaiting your pickup my address is 135 North Valo dr. its the one with the black speed3 out front  OH yeah! I Traded the Evo in for a 2010 Mazdaspeed3 and about 2k cash back. I loved the evo but this speed is the more practical choice for when I need to haul a car part or 2. the previous owner threw some bbs lm's on it and I am certainly not complaining. I think some new springs will set this car off right  
|
|
Roleplay: |
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#1607 2015-02-04 04:14 |
# Driftphantom : The 2j is pulled and awaiting your pickup I'm on my way, also good find on the Mazda. I'll be outside with the STi in like half an hour. |
|
|
Do it for the ratchets |
|
couger389
Posts: 213
Location: United States Occupation: Destroying frames and taking names Age: 26 V$: |
#1608 2015-02-04 04:39 |
|
Any engines for sale?
|
|
 Will this fit in my honda? -Moog 2014
|
|
RinKK
Posts: 147
Location: Romania Occupation: Cruising in my Dacia Age: V$: 18500 |
#1609 2015-02-04 14:20 |
# couger389 : Any engines for sale? I have a 500HP RB25 |
|
Tom Diablo
Posts: 687
Location: Germany Autobahn 44 Occupation: Self-combustion Age: 34 V$: |
#1610 2015-02-04 14:31 |
# couger389 : Any engines for sale?And I have a BMW S54B32CSL. 360HP out of 3.3 litres (It's N/A) @Haku: You should use the VS image hosting; photobucket wants your money XD |
|
 Diesel life |
|
Snowfox
Posts: 757
Location: Netherlands ¯\_(ツ)_/¯ Occupation: Blacklist Age: 31 V$: |
#1611 2015-02-04 14:45 |
|
@Facepalm, this gonna be good! Original and awesome!
|
|
 |
|
gt3076r
Posts: 1133
Location: --- Midnight City Occupation: REKT Age: 12 V$: |
#1612 2015-02-04 19:53 |
|
Small updates on the GS300. I got a new 2 core Radiator, new rotors and a Nardi Wheel which looks damn nice. A friend brought over some spray paint and we painted up all of the pipe fittings that were once blue. I think I'll be selling my coilovers for bags..not sure yet. Offers are invited. Some photos-
 Nardi Wheel. I love it!  You can see the painted fittings and new rotors...sorta.  Bonus picture for the fun of it. |
|
STANCE ARMY u avin a giggle m8 il bash ye hed in i swer on me mum |
|
2jzCookie
Posts: 252
Location: Sweden Occupation: Doin hoodrat stuffs Age: 26 V$: 7376V$ |
#1613 2015-02-04 20:04 |
# dxg1997 : If you don't want it, I'll take the engine off your hands for $500 when you find your new engine. I got an idea I can use it for $500 sounds great. I was going to swap it out anyways, so that just gives me some room! Anyways, give me a location and we'll meet. I'll take the silverado. A wine red one, lifted. Added 3 minutes later: # Ey papa : Nice Buy 2jz, if you want I got an engine for you, I have an S54 if you want one, It's for you for 2000$ I'll come take a look when I'm out delivering the other engine. How much mileage does it have? |
|
couger389
Posts: 213
Location: United States Occupation: Destroying frames and taking names Age: 26 V$: |
#1614 2015-02-04 23:03 |
# RinKK : I have a 500HP RB25How much? |
|
|
Will this fit in my honda? -Moog 2014
|
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#1615 2015-02-04 23:23 |
@Haku: You should use the VS image hosting; photobucket wants your money XDThanks, I've got it sorted somewhat. I'll use it from now on, I just couldn't be bothered to make an account. We all make regrets
|
|
|
Do it for the ratchets |
|
rtv190
Posts: 15
Location: United States Occupation: Age: V$: |
#1616 2015-02-05 00:10 |
# couger389 : Any engines for sale?I got a several stock LS3s from old Silvias i did V8 swaps in |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1617 2015-02-05 00:16 |
|
Hey everyone, greetings from Croatia.My name is Mishel, own a chain of a few bars and in my free time i like to work on cars and go on events with my friends.I made with them a small stance comunity called "Low Ladies", we are small for now and mostly work ower our group on Facebook, but i think we are now around 15-20 members strong.I had a few cars back in the years, but right now im kinda stuck with my daily.Its a Toyota Chaser, nothing special, i bought it from a mid aged guy, its haveing good milage on it and its chassis was completly redone.I took it cause there is space for kid in the back and i can actualy get stuff into the trunk.Last car i had was a 1989 Honda Civic Sedan, put alot of money and love into it, but sold it cause i needed something bigger.The Chaser is good, it has a stock 2JZ-GE engine with a few aftermarket parts, nothing special.I got the Volk's for my last birthday from my wife, basicly i wasnt able to spend money on car parts cause of the baby, but with the company working good i was able to put some money by side, and now im lookin for something new.A new project.For now ill say it will be a youngtimer cause i love older cars.Ill update you guys on what i found and what will be the project car.For now here are some pictures from my daily Chaser.
*Cheers*    
|
|
gt3076r
Posts: 1133
Location: --- Midnight City Occupation: REKT Age: 12 V$: |
#1618 2015-02-05 00:25 |
|
Welcome!
|
|
STANCE ARMY u avin a giggle m8 il bash ye hed in i swer on me mum |
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#1619 2015-02-05 00:29 |
# CALLmeSCOOBY : Hey everyone, greetings from Croatia.My name is Mishel, own a chain of a few bars and in my free time i like to work on cars and go on events with my friends. Welcome to the forum, already loving the Toyota. Got a soft spot for chasers and that 2JZ is looking nice
|
|
|
Do it for the ratchets |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1620 2015-02-05 00:55 |
|
thnx all for the nice welcome...just to say i kinda am thinking of buying the 240Z or some other 80's JDM car...ill hop on the craigslist and start searching...
|
|
Haku
Posts: 779
Location: Canada Ontario Occupation: Hood Rat Age: 26 V$: 69,420 |
#1621 2015-02-05 01:12 |
|
Build update since buying the turbo 2JZ from Driftphantom:
Old engine out  I plan to keep it for spare parts, instead of selling it as I do with most of my old stuff. Fitted the new engine in, removing the old air intakes from it  So that I could do an intercooler system on it to get more cold air into the turbos.  Put on my old ARC rad, new HKS intercooler set up, as well HKS oilcooler and HKS transmission cooler. I plan to be running cool  Went for a slide to break in the motor  Somewhere along the way I lost my new headlight  But that's okay, because I have big things coming anyway  Stay tuned
|
|
|
Do it for the ratchets |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1622 2015-02-05 02:40 |
|
Ok i warmed my chair from searching for a car but i think i found the right one.There were a few good ones but the one i rlly am interested in is kinda rare here where i live.I think there are less then 5 runing on the street so it is a real found.The bad part about the car is that it is crashed, which means there is a ton of job that needs to be done on it.I would top out my budget but on the other side i would have a rlly rare car here in my country.The engine isnt the original one but it is a carburated 6cyl. Now, i kinda dont want another NA 6cyl. cause i already got bored of the 2jz in my Chaser, so i would go turbo, idk, wana try it out.But that is a thing that needs to wait cause 1st is the chassis to be done.Its not rusty, but its messed up rlly hard.Some parts will need to be ordered from Japan since there are none in my Country.Maybe someone here is from Japan and could help me out find the parts there.This car will take a while (-.-) .I wanted it to be done rlly soon so i can drive around finaly.Ill go tomorrow to see the car and report here.For now i only have the pictures from the web.
     
|
|
gmaw
Posts: 23
Location: United States Occupation: Designing and playin games. Age: V$: |
#1623 2015-02-05 03:16 |
|
Hey guys, been a while I know, but I went and picked up the MX5 and worked pretty hard on it haha. So It's fit for a daily now. Just made it a pickup, new rims, and a swap to a 13B. Sold the AE86 though. It was a high number that I couldn't refuse haha. All I will say is it was more than I thought the car was worth. So how much do you want for that Chaser Scooby? Welcome to the forum man. Hope you enjoy it.
|
|
|
No signature here. Move along.
|
|
Ey papa
Posts: 1613
Location: Canada Tokyo Occupation: Driving my Wicked Focus Age: 29 V$: 50467 |
#1624 2015-02-05 03:22 |
I'll come take a look when I'm out delivering the other engine. How much mileage does it have? 50,000 Miles |
|
|
I like Kentucky Fried Chicken.
And I'm White.  |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1625 2015-02-05 03:28 |
|
thnx man, well it aint for sell (yet) its my only car right now, i am goin to take that Cressida.For now i need it same as my wife.Once the Cressida is on the street, i can sell the Chaser even dough i dont know, it uses me well, has space...maybe i trade it for something biger.Time will show.
|
|
gmaw
Posts: 23
Location: United States Occupation: Designing and playin games. Age: V$: |
#1626 2015-02-05 03:32 |
|
Ok man
|
|
|
No signature here. Move along.
|
|
stonedmonster
Posts: 466
Location: Australia Occupation: Age: V$: |
#1627 2015-02-05 06:44 |
|
so i cant stand seeing everyone with there nice cars and just sit by without building a new showpiece so im picking up a car later today
|
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1628 2015-02-05 07:10 |
|
So i woke up rlly early today to go check out the Cressida.And yep.I BOUGHT HER!!! Damn i was so pumped up the whole night, couldnt sleep.We brought her home and i finally could get a better eye on her.Well see for yourself.
    Me and my friends started imideatly to strip her off and started on the body work, since there is alot to do on it.Most parts i had to throw avay, and i need to get new ones.But i kinda want new ones cause i want a fresh start for her.   I cant belive but the original badges somehow survived the crash and i can keep them on the car.Would be a pain in the @ss to find replacements.    We completly done the body work, she is fully primed.   She already recived her 1st gift, from my friend.He bought me a shift knob for her, and we imideatly fited it and had a laught.Looks like a huge green dildo.Now i have to hold it in my hand all the time i will drive.    The inside of the car is as new, rlly amazed it is in such good condition.Happy that i dont have to spend money on that aswel.  On the drive home i already picked up 2nd hand front quaterpanels and the doors on a scrapyard.   The owner of the scrapyard sad he had the parts there for a few years, thought he will newer get rid of them.  Good he didnt throw them away.   Thats it for today.I am madly tired, goin to bed now  , but couldnt go to sleep without writing here to you guys.I wish her good luck in my hands. PRAISE THE CRESSIDA!!! 
|
|
Tom Diablo
Posts: 687
Location: Germany Autobahn 44 Occupation: Self-combustion Age: 34 V$: |
#1629 2015-02-05 13:59 |
|
Welcome, Mishel!
I've replaced the distributor; It was even worse than I've expected. It runs but it needs some fine tuning. -->3 days later<-- I went to my buddy Greg to get the front painted so it matches the rest of the car. Had some beers with him; The usual stuff   It's basically ready to rumble |
|
|
Diesel life |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1630 2015-02-05 14:39 |
|
Ok so today i picked up the full suspension stuff with new brakes for my X30.I went with H&R UltraLow kit and some Wilwood 275mm brakes with 6 piston calipers.We mounted up everything and it looks rlly awesome.Btw, found my old steeles from my Civic (the one from the avatar pic) and mounted them so i can see how it sits on the floor.I rlly like how it came down.Even though i want more low, it will handle nice with this setup.Oh yeah and we primed the doors, they were in mint condition, so we just got rid of the previous color and got them primed.Here some pics.
         I will need to go pick up some body parts for her that i found here, but i am waiting for the trunk, grill and lights to come from Japan.Until the parts are not shiped i cant paint her.Nwrmind, more time to work on the engine.And i still duno what rims i will choose.I want to go with Meister S1 or SSR Profesor, but i like the CCW Classics aswel.Cressida will look awesome that is what i know. |
|
Ey papa
Posts: 1613
Location: Canada Tokyo Occupation: Driving my Wicked Focus Age: 29 V$: 50467 |
#1631 2015-02-05 19:40 |
|
So Guys I bought an EJ25 yesterday for my Impreza
 And I went in a subaru parts shop to buy Some Bumpers, They are ready to be paint but they are installed, and some wheels  The car is nearly done, only thing to do is the gear ratios, Adjust the Boost, and a Tune for my ECU. BTW: I sold My E34 To the owner of the paintshop, and I am Looking for a 240sx (preference stock), I will make a Drift Build |
|
|
I like Kentucky Fried Chicken.
And I'm White. |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1632 2015-02-05 21:51 |
|
We just came home from the gathering of parts.Got the bumpers, all windows, mirrors and my fender flares arived today.Didnt fully mounted them, just put them up so i can see how they will fit.
         We are goin to start today with the engine.Ill dont say but it kinda was obviouse that i will pick it.Pics of the Engine build comes today evening or tommorow. |
|
M3fx
Posts: 124
Location: Romania Ploiesti Occupation: Guilty. Age: 28 V$: |
#1633 2015-02-05 22:20 |
|
@CALLmeSCOOBY - Slow down tiger, it's called roll play, so you can't fix car in few hours, and put suspension in a few minutes. Do like in real life, today you pick something and mount it on the car, and tomorrow got another thing, and etc. Try to make thinks like in real life, don't hurry.
Hello guys, few updates at the BMW. Picked up Vossen Wheels 19x8.5j on front and 19x10J on back. Paid for them $2.000 with tyres and bolts.  
|
|
 |
|
Driftphantom
Posts: 667
Location: United States Occupation: AOW Sales Rep Age: 27 V$: |
#1634 2015-02-06 00:51 |
|
Took the s2k out today topless
went to go get springs for the speed3, turned into writing a check for a quick release up and steering wheel by driftworks.   in addition to the new wheel the mazda got some love. I picked up some tein circuit master n1 coilovers. the right is stiffer and the car grips a lot better to the road. this isn't slammed, its only been spun down 2 notches   
|
|
Roleplay: |
|
couger389
Posts: 213
Location: United States Occupation: Destroying frames and taking names Age: 26 V$: |
#1635 2015-02-06 01:47 |
|
So technical difficulties caused me to finish the car immediately, but here it is. Their isn't much else to do to it. Tell me what you think
  
|
|
|
Will this fit in my honda? -Moog 2014
|
|
stonedmonster
Posts: 466
Location: Australia Occupation: Age: V$: |
#1636 2015-02-06 05:53 |
|
hey guys i have been working on my s14 for about 2 months and i dont have many build pics but here are some (lol quick build)
when i got it   new engine for it  rest of the body and twin turbo kit   i ended up changing fronts 
|
|
Tom Diablo
Posts: 687
Location: Germany Autobahn 44 Occupation: Self-combustion Age: 34 V$: |
#1637 2015-02-06 07:43 |
|
It's 2 weeks later now and I've lowered the Cuda so it sits at 7.50". Whoever had the car installed a stock suspension which is way too soft. It now has a GReddy Type S suspension.
|
|
|
Diesel life |
|
CALLmeSCOOBY
Posts: 372
Location: Germany Munich Occupation: Co-Owner of LowLadies Age: 36 V$: 4100 |
#1638 2015-02-06 15:18 |
|
A few days later...
So we had some trouble, as always when building a car, but we menaged to get the engine inside and runing.I went for a 2JZGTE, with alot of aftermarket parts, we even could take her for a run around the block.She runs good, need to dyno her and fine tune her later when she will be complited.         Its snowing rlly hard this days so i cant continue the build until the snow settles up. *Cheers* |
|
2jzCookie
Posts: 252
Location: Sweden Occupation: Doin hoodrat stuffs Age: 26 V$: 7376V$ |
#1639 2015-02-06 22:17 |
|
@CALLmeSCOOBY that Cressi is coming along really good!
Well there has been some major changes to the e36. One of which is it's no longer in that disgusting old beige/dirty white paint. In fact it's not in any colour unless primer and some bogger is considered paint   (I would use Coprone's ENB but I have issues with it. It's blurry for some reason.) Here we have it. With some help from friends we stripped the car and started sanding it down. There were ofc some dents in the body of the car. Seems kinda logical since the car has been drifted the last few weeks The car was almost 100% rustfree. Other than minimal rust in the wheelarches and some rust in the frame it's free from it allthough the frame rust needs to be taken care of. Dont want anything snappin in half while im out skid racin...@Ey Papa Do you still have that S54b32 engine for sale? If so i'll come over with some cash and buy it. Might need some help getting it to my place. I blew a headgasket in the Silverado and i'm pretty sure it wouldn't fit in my volvo 855. If it would it would kill my suspension and I would love to have atleast one running car
|
|
Ey papa
Posts: 1613
Location: Canada Tokyo Occupation: Driving my Wicked Focus Age: 29 V$: 50467 |
#1640 2015-02-07 01:19 |
# 2jzCookie : Yes I still have it |
|
|
I like Kentucky Fried Chicken.
And I'm White. |
]
This topic is locked, new posts are not allowed.