VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

Snowfox's Garage NE...
 
Notifications
Clear all

Snowfox's Garage NEW RIDE [Real Life]

133 Posts
24 Users
0 Reactions
87.7 K Views
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

Thanks! I'll be updating this a lot more now since i got some work to do again!

Picked up the S13 on Saturday with my dad since i'm not allowed to drive with a trailer attached to a car, took us over 6 hours
to get it and drop it of at the place it's sitting now. Exterior is complete altough it doesn't look like it. Everything is inside the car.
i'm gonna work on it tonight, check out what i need and what i got.
Went to belgium yesterday to pick up the seats and 2 CA18DET's both without turbo's and manifolds. Those are gonna go to a friend of mine which will be built to one engine, since he rebuilt various engines such as RB25's and 1JZ/2JZ's
here are some pics of what i got right now and a pic of how it used to be a few years back.



   
ReplyQuote
Coprone
(@coprone_9681)
Noble Member
Joined: 13 years ago
Posts: 1288
 

I see rear fenders flares are wider than factory? I assume it's been tuned before you got it.

Added 11 seconds later:

Anyway, dang nice



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

Rear fenders are el cheapo flares that really need to go, the guy i bought it from used that Putty stuff to "smoothen"'it out so he could paint it white to avoid any rust on the chassis, probably gonna get it back to stock but i need some metal plates for it. Looks good from a distance but shitty up close



   
ReplyQuote
doge
 doge
(@doge_11104)
Famed Member
Joined: 12 years ago
Posts: 3360
 

looking nice, finally some real life build thread 😃



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

cambergang sticker incoming, perfect stance 🙂)
let's see, I found your orange prelude mate on Car Throttle, followed your instagram, where can I stalk you more?



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

It has camberplates tho xD basically that. I post most things on Instagram and some on facebook.



   
ReplyQuote
Bigg_Boss93
(@bigg_boss93_1370)
Member Admin
Joined: 15 years ago
Posts: 3835
 

Awesome! Grats dude, cant wait to see progress on this 😃



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

Thanks 😃

Welp i started unpacking the car and since i had no room to leave all those parts laying around i figured i'd just ziptie most of the stuff on there.
So here it is my 89 200SX

The good part is that the exterior is complete, the lights are complete, the battery is in the back already.
The bad part is the left front is bent, the front brakes were literally cut off, and most bolts snapped and need to be drilled out.
Now i'm just talking about the outside of the car here, to be honest i knew it'll be a big job but it was a little bit bigger then i thought.
The question now is, will i get it just running and looking alright, or will i wire tuck the engine bay and make a clean car.
Is it worth it? I'll need to make a list of what i need to make sure of it.



   
ReplyQuote
Jaziba
(@jaziba_3)
Member Admin
Joined: 17 years ago
Posts: 1318
 

My advice go Dex style, and get a cleaner example to get the best out of it (also still dying here, hoping this car is not an import but a genuine dutch S13)



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

Dex Style? I think i'll do that, just get it properly running and functional



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

Well hi again,

The S13 project will be shut down do to minumum experience in that and just to much work.
sooooo i bought a working one with just some rust and bad paint!
it's a 1990 Nissan 200SX S13 with a CA18DET here's a specs list!
It's really tail happy in the rain which i love!

Engine:
CA18DET
new Garret T25G turbo
HKS SSQV blowoff valve
3Inch intercooler
2 inch catback exhaust system
walbro 255LH pump
shortshifter
Exedy sports organic clutch

suspension:
HSD Coilovers
Apex tierods
Drift Works tension rods
s14 4 pots brakes front
280x30 brembo brakes
Ferodo DS2500 brake pads
camberplates
whiteline swaybars
polybushed bushings
subframe lockers
S14 Diff(VLSD)
APEX Steel brake lines
17x8/17x9 Rota's

interior:
S14 seat
QSP deepdish steeringwheel

pics:



   
ReplyQuote
TofuHachiroku
(@tofuhachiroku_21454)
Estimable Member
Joined: 11 years ago
Posts: 152
 

It looks like you got a real goood example of an S13. The body itself looks great for the car's age. How's the underside?



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

Pretty damn bad :awesome:
both rear panels need to be redone and the sills just to be sure. there's also a small hole on the passengers side behind the seat.

got the backseat in yesterday, fixed the fan in the centre of the dash which was a wooden piece with holes in it surrounded by a piece of orange juice carton. Just how do you think of something like that! Also swapped on light with the white S13. Gonna continue on thursday



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

heard you wanted to sell your white S13 to me when you got all the good things from it? 🙂)

tfw no money



   
ReplyQuote
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
Topic starter  

I will indeed do that probably gonna go under 1K, just need a few things now like the antenna, the cluster/surroundings since mine works backwards. Cruising down the highway with 120kmh shows i'm going 240 on the cluster

Things done so far:
back seat back in
fan thingy in the centre
swapped a tail light that cracker

Added 2 minutes later:

Wanted to swap the headlights for newer ones but found out the new ones don't have heigt adjustment ._.



   
ReplyQuote
Page 6 / 9
Share: