Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Adjustable brake force for CMS brakes, would that be a good idea maybe? 🙂 I love the stock brakes with your mod, but they are not even close to as good looking as CMS 🙂
cms is adjustable too. press on caliper
i think there is something not right in suspension travel, thanks to your mod its now possible to remove shocks and springs and still have wheels attached, and when you go drive it on a track, the car will act like there still are springs there, maybe this is altering the expected handling, please investigate on this, if i remember correctly SL1 was not like this, when u remove springs and shocks the car will bottom, i cant verify tho. also, if u think its possible to have front suspension arms installed on the rear? can u do that with some scripting? i bet you the handling will be a bit better and it will look better too.
Also, im not really sure but i think, the tires have optimum slip angle too high and gives a bit unreal handling?(again im not sure) real street tires have optimum grip at 4-9 degrees, and this decreases with stickier tires. or its just maybe the tire grip model thats acts like half sine wave?... i really dont know why it still doesnt feel like its old brother... sorry for bothering you if i did
i know about bug without shocks and springs. i can fix it but then wheels just go into the ground, so i left as it is.
and of course tyres aren't realistic. it's very hard to make diveble and realistic physics, if it's even possible
V4.5 on Ebisu with 1.5JZ PS13 using xbox 360 controller
I edited the values on a set of sway bars to be very stiff like the Largus 32mm front and 28mm rear this is a 190% stiffer front and 220% stiffer rear I used the formula 25000 x 1.9 and 25000 x 2.2
best physics ever I'd say 4.5 is final? Can't imagine it getting better! It feels very Forza~ like which is fun! Especially if driving with PS3 or 360 controller. Some tuning and rescripting of the Kg/mm rating on springs makes a big difference with your physics mod as well as not running skateboard status suspension nms rating, most coilovers like Stance or DG5 are rated between 4700nms to 5500nms anything higher on dampening is asking for understeer of excessive oversteer. Some softer dampening with stiffer springs ties this physics mod completely together for a ultimate SLRR experience.
Added 11 minutes later:
# JJayJameson :
i think there is something not right in suspension travel, thanks to your mod its now possible to remove shocks and springs and still have wheels attached, and when you go drive it on a track, the car will act like there still are springs there, maybe this is altering the expected handling, please investigate on this, if i remember correctly SL1 was not like this, when u remove springs and shocks the car will bottom, i cant verify tho. also, if u think its possible to have front suspension arms installed on the rear? can u do that with some scripting? i bet you the handling will be a bit better and it will look better too.Also, im not really sure but i think, the tires have optimum slip angle too high and gives a bit unreal handling?(again im not sure) real street tires have optimum grip at 4-9 degrees, and this decreases with stickier tires. or its just maybe the tire grip model thats acts like half sine wave?... i really dont know why it still doesnt feel like its old brother... sorry for bothering you if i did
why would you want only a single A arm suspension? mistersirs V2 arm rear is a Lower Control Arm with Rear Upper Control arm such as the design on the multilink system designed utilised by Nissan on the R and S chassis which allow a wide range of adjustability. Are you in search of more adjustability? I have a rescript of MisterSirs lower control arm set up that allows up to -50 camber and up to -40 to +40 of toe.

example of a single arm would be the X70 Cresta/Cressida (trailing arm rear end) which only get more camber the lower it goes that is not adjustable! As well as very aggressive toe in (where from the top view the front of the tyre sits further into the wheel well, this makes it hard for an effective drift set up or grip due to odd tyre friction.

Multilink allows tweaks to toe, castor deflection, and camber.

you can see RUCA, LCA and toe rods in this exhibit by Part Shop Max.
Figured this was on topic with physics :]
Version 5.1
whats new:
-Added adjustable swaybars
-Tuned tyres
-Tuned springs
V5.1:
-More grip
should work fine when updating from 4.5
can you make some tires that can kinda grip with 1000hp and the same in torque? want to drive in my supra 😃
I think that the behavior of that multi link rear suspension you talk about is the same as swing axle, the 3d model only is higher poly with nice details, i dont think it behaves like real multilink, i also dont think positive camber it generates when rear hops during a bump in a corner is good for speed/grip, also negative camber caused by rear weight transfer is not very good for acceleration becauae of a smaller contact patch, i Never saw swing axle in a racing application, so mcpherson is better here because it has less flaws than swing axle which seems to be the type of suspension that the rear suspension is modeled after in SLRR. In a nutshell, i think rear suspension is badly modeled.
Hey man, I have a quick question. I love what you have done it has made my experience with slrr X10. Though when I am drifting it seems that it doesn't want to swing out as much 500+ hp it just wanting to go straight and I get massive amounts of understeer :/ Any idea what I may be doing wrong?
bad car physics i guess
does the mod do all tyres or only stock ones? and can i edit the grip myself for one tyreset only?
mod affects all tyres. you can edit grip by changing tyre compound or editing tyre java
Added 5 hours 12 minutes later:
Version 6.1
what's new:
-very different tyre set, much less floating in corners
-some fixes
V6.1
-less understeer
Hey now i'm getting less understeer hurray 😃 gonna upload a video soon. Thank you so much mindeliszz you are the man.
do you know how to make like traction control/ assist?
@mindeliszz - I enjoyed that physics a lot (mostly making cars without suspension) and after hard testing, I found that you've made adjustable brake pressure and brake balance - but isn't it the same thing? I mean you can do brake balance editing brake pressure on certain wheels.
Also - I have one suggestion:
If you click on tune tool, you can adjust brake pressure - from 0 to 100%. My idea is to make it from 0 to let's say 120%, so you can make cheaper brakes stronger 😉
