VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

A quick review of what happened the past week:
I acquired position #18 while cruising at a mountain while disguised.

I acquired position #15 by beating a man with his sons.

Next up, position #12, and then #11!
I'm going to face a bunch of kids who think ricing is tuning, and then I'll face someone who truly knows what he's doing.

Added 56 minutes later:

I went up with #14. I was really PISSED off.

YOU. DON'T. RICE. A. CHARGER! He was so confident that he would win, that he called my Skyline a "black riced out piece of shit."
I raced him for pinks. I won.

But I was surprised that I won. I mean, it's a Charger, it has a V8. I could have sworn that when he started the car, there wasn't that nice V8 engine sound. I was praying for it to have a non working V8. I was just PRAYING.
Next day, when I picked it up from Connor (He's responsible for everything pink slip related), I decided to check the engine.
I was shouting and screaming, and I could have sworn I threw a wrench at a fucking fire hydrant.

IT.
HAD.
A.
FUCKING.
INLINE 4.
ENGINE!
I was fucking pissed off. I felt scammed! I took it off and sold the engine IMMEDIATELY.
Then I covered the ugly as fuck badly made stickerbomb shit on the fender.

Will do. For now...



   
Kokainum
(@kokainum_12139)
Reputable Member
Joined: 12 years ago
Posts: 259
 

good luck with the charger man
most of the times it's tough to de-rice a car



   
Snowfox
(@snowfox_8058)
Honorable Member
Joined: 13 years ago
Posts: 730
 

It brings a tear to my eye how well you've taken care of the R32, You're the kind of person i want to sell my cars to.
I've been searching my ass off for a car since i sold the R32, but i can't find anything of interest, the Eight-six is not fast enough for the racing scene and i can't seem to find anything that fits me, i was thinking of an AW or an SW but those are just 4 inlines, i would get smoked by anything that goes over 4 cylinders. Maybe a Supra but i can't find any stocks ones, all have been fully tuned and way out of my budget and others are just to expensive. I've seriously been going to work on my Mountain bike. This is getting pathetic..

@Facepalm, duuuuuuuude, i love your stories man! They feel so real and worth following!



   
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

You know, the Opel Manta I went against was quite a competition. And from what I've seen, some ranks further are V6s and V8s! And some V10s too!
@Snowfox Thanks man. It's really nice to hear that.

Added 29 minutes later:

And a last small update: I decided to begin working on it. I redid the camber, and painted the fender.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

A Charger with an I4?! :wtf: That is blasphemy! WTF is wrong with that guy?! Good thing that I wasn't around, I would have shoved that I4 up his butt!
@Facepalm: I can try to dig up a decent mopar engine if you want.
@Snowfox: I feel bad for you. So bad that I am willing to sell my BMW to you. It has still everything in it.



   
stonedmonster
(@stonedmonster_2362)
Reputable Member
Joined: 14 years ago
Posts: 452
 

alright i have some images of the new build will upload them soon



   
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

# Tom Diablo :
A Charger with an I4?! :wtf: That is blasphemy! WTF is wrong with that guy?! Good thing that I wasn't around, I would have shoved that I4 up his butt!
@Facepalm: I can try to dig up a decent mopar engine if you want.

Yes please. I'd like that.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

# Facepalm :
Yes please. I'd like that.

Cool; I'll go to Phoenix, AZ. There is a place called: Desert Valley Auto Parts. Do you want to join me? It would make it easier finding the right engine for your car. I've been there before and it's like a Mekka for classic US car lovers. If you want to stay here, I'll try to find a 440 or something similar.
If we're lucky we can check out the auction. They sell all kinds of cars.



   
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

I'll come with you. But let's carry the Charger too, and see what fits it best. Cover it up too.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

No problem; I'll pick up a tarp and I'll come over with the Sierra. I'll bring my trailer. Grab some cash and I'll pick you up tomorrow morning. The trip will take a few days; Phoenix isn't around the corner and I bet you want to explore the place a bit. I know some good motels and restaurants down along the interstate.



   
Gaveup
(@gaveup_8000)
Eminent Member
Joined: 13 years ago
Posts: 20
 

Will be cool to see how much the performance picks up with that Charger once it has a proper engine in place.

I did a compression test on my Porsche and it came back even but low across all cylinders, like I was saying last time I was going to dig into it to figure out what was really going on I picked up a cheap complete gasket kit at Napa and did a little disassembly.

So I guess it was built with 2.2L connecting rods to lower the compression so it can run more boost safely without needing a lot of tuning.. or I'm over thinking it and the previous owner was just an idiot. I got it put back together reusing whatever rings and gaskets were good and replaced only what I had to after seeing those rods I was already planning on pulling it for a full rebuild.

And now to start searching for a master rebuild kit, if I can I'm going to upgrade the block as well if not see what my mill can do with it.



   
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

Sounds good to me Tom! See you tomorrow then!
And a small update on what happens next:
#13 forfeited because he crapped his pants, which means I go directly to #12. This is all I know about #12:

I don't know this car, and I've never heard of it. But it looks interesting.



   
Gaveup
(@gaveup_8000)
Eminent Member
Joined: 13 years ago
Posts: 20
 

Turns out the engine being a Duhen might not be the worst thing, getting parts turned out to be very easy since it's just a standard production engine. I have a brand new 1.8L head and block coming, full gasket/o-ring set, new water pump/oil pump and belts as well as the proper rods and new piston rings, bearings, and ARP fasteners to get them installed correctly. It's going to be a pretty plain build but done with precision and making sure it's all nicely balanced, here's a shot of the bare block!

I'll try to get some shots of getting it all together but will be doing it myself so we'll see, can't wait to get it on the dyno after.

Added 4 minutes later:

# Facepalm :
I don't know this car, and I've never heard of it. But it looks interesting.

Definitely looks like it has a lot of work into it, tires don't seem all that wide looks stable though pretty long wheel base.



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

So, sold the Volvo diesel thing. Now I'm down to the Regal, Subaru, Evo 6, and FrankenLevin. Gonna set up some suspension in the Regal, lower it a bit and put some sticky tires onto it, and challenge #11 in the underground circuit and see if I can jump right into it. I really trust my car has enough power to beat the guys LS3 El Camino. He only has a mild tune on it (I actually did the work on it) and it makes about 450 bhp in a loose chassis. My T-Type makes about 500 in a really nice chassis. I got a frontal shot of the Camino when he came to pick it up. I'll try to find it. Idk how he got that high in the ranks, but I'm gonna knock him down a peg!



   
gt3076r
(@gt3076r_7071)
Noble Member
Joined: 13 years ago
Posts: 1070
 

-One month later.

I finally got around to beginning the single turbo swap. I only took one picture for now but I'll take more as I go along. I'm swapping in a relatively small turbo because it's just going as a simple replacement for the twins,nothing too extreme. Today I removed the old exhaust manifold, exhaust system and the other piping. The Valve covers are coming off for a repaint and I'm replacing the headgasket with a new aftermarket one. Check it out-

Old stuff out, Virtual Works Ceramic Coated Exhaust manifold and a GT3076r in.



   
Page 95 / 541
Share: