VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Bigg_Boss93
(@bigg_boss93_1370)
Member Admin
Joined: 15 years ago
Posts: 3835
 

7pm/1:30am... wow. We've been working for so long that i still hear ratchets, grinders and welders sounds. Holy crap.

I know Harrison from quite a lot of time now, i've seen his works in pics and i knew he were a real professionist, but i swear i didnt expect him to be able to work at our rhythms flawlessly.

On this project was involved the whole garage(JC, Franco, Joe, Frenki, Remco, Jaz and me) plus Harry. Basically we were open this morning and afternoon(down to 3pm) for public(mainly had to deliver some parts to customers) and then closed so we could focus on the 127.

First we took out all the front end parts(in order to not break anything) and the old engine and transmission, it wasnt too bad honestly, we rolled it on the dyno(engine only) and the result was 140hp at flywheel.

But well, you know me, i'm not exactly what you would define normal. I went to Japan specifically to see and buy this engine, a fully built K20A stroked to 2.2 with an impressive power output of 250hp and a complete 6 speed transmission, it was a good deal, wouldnt have been able to buy something like that locally.

And yep, you understood correctly. That's almost 80% more than the old engine, which had already ported at about 90% power more than its stock form(75hp) meaning a total power increase of about 230%. 😃

We knew we couldnt keep the stock running gear under this thingo, it would've been too dangerous and honestly i dont like that my things fall apart while running on them. So we put a full 595 abarth racing running gear, we used all race parts including a full set of AP racing big brakes and some new Fatlace 16" wheels to top this wonderful cake.

It isnt obviously finished, we're going to work on it tomorrow and try to take it as close as done as possible. It still needs proper interiors and some other small details.

I am still in disbelief of how we managed to do all this in such a short time. Anyways we're just back from a ride in the highway, gonna have a beer all together and then go to sleep, it's going to be another tough day. :cheers:



   
FamousMan
(@famousman_8823)
Honorable Member
Joined: 13 years ago
Posts: 495
 

Aww man 🙁 haha I regret selling mine soooooo much! Been trying to get ahold of one for a while now.
And thanks man! I'm really happy with and can't wait to start adding my own little touches to it.

And damn Big_Boss!! that 127 is coming along a sooo nice! She's gonna be quick! Can't wait to see it all put together and finished.



   
LoganC
(@loganc_3971)
Reputable Member
Joined: 14 years ago
Posts: 381
 

Looking great BB93! Those AME x Fatlace's fit really nicely!



   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 

Helloooooo, Pudsey!

Okay, that was intense. I came expecting to work all day, and now I'm glad to have more experience really getting my hands dirty with this stuff. I've done engine swaps before, but mostly into cars that were already set up for the swaps, in terms of engine mounts and stuff (RB26 into S14, LS7 into G8 V6). This was entirely new territory and we had to do a lot of figuring out stuff by ourselves, but, we handled it - and I think the result came out pretty good, all things considered!

The night I arrived, as well as tonight, I managed to take some nice pictures of all of the cars around the shop.

The first thing I said to Marco when I arrived was: "Let me see it." He knew what I meant, immediately - the other 2JZ powered R33 across the world, the twin to the one built locally at the VS Garage branch in Arizona. Indeed, he took me to the garage to show me how things were going to be set up, and I saw it there:

The green R33 back home is an S1. I think this is too, but I don't know the year or whatever. Marco has been, let's say, "coy" about the details of the car - no fair, in my opinion, especially since it's kind of a demo car! ("Street drift" car, aka, used for demostrations and exhibitions.)

That derrière, though? Off topic: XS Engineering was a local shop in Phoenix (yes, in real life too) and it's cool to see their brand and parts here.

Yes, yes, the steering wheel is a kouki version, and so this might be an S2 with some S1 parts - but that's not even the point here. Marco surprised me while I was admiring his car, and he said "Catch!" suddenly. He threw the keys to me! (I'd like to say I was cool enough to have caught them properly, but I'd be lying. I mean: jet lag.) He told me that I could tool around town with it if I wanted, and that I could even burn up some tires at a local skid pad if I wanted! I told him I was honored and that I'd have to take him up on it - though, not until I had had some proper sleep. My sleep schedule was never truly "local" to Arizona to begin with, really more like somewhere out in the Pacific, so I felt entirely messed up sleep-wise.

Then I stepped around the corner and - holy crap. VS Garage must have some really rich folks for customers or something. I saw what looked like just a tuned Ferrari 355 and a TVR - both exotic for Phoenix (though maybe the Ferrari would have been expected in Scottsdale), but I didn't think I was looking at anything too rare.

Then I looked closer. The TVR, especially, gave me pause, because I wasn't believing my eyes for a moment - I thought I was actually looking at the genuine TVR Cerbera Speed 12, aka Project 7/12! No, as it turns out - this is a 4.0 Speed Six powered Cerbera with a custom turbo kit on it (see also the HKS intercooler) and a full bespoke Speed 12 body kit made out of carbon fiber. The 355 was a surprise, too - it was a genuine Challenge with a low-digit serial number (one I won't disclose, out of privacy).

Beautiful pieces of art. Also confirmed to me that, yes, I was smart for choosing big enough brakes to put onto my own R33.

After taking these pics, I stopped acting like the doofus tourist I felt like and went to bed. We worked all day the next day, and Marco took the few pictures we have of that; but, I snapped some more pictures of some cars in and around the shop.

Marco's very own Supra. Love it - especially the glass roof, which is a pretty sweet styling choice, even if I wouldn't have gone with anything but a fixed roof on one of my own cars.

I love the carbon diffusers on this car. I'd get something like this for the Supra if I thought they were good for aerodynamics or if they fit the theme of the car, but sadly, they are neither (and are outside of my budget while I hunt for more BCNR33 engine parts!).

Another customer car: a Corvette C6, obviously not a base C6 Z51 because it had the wider GS / Z06 / ZR1 fenders, perhaps ZR1 especially.

The car was indeed a ZR1, but I was really surprised when I got close enough to look at the engine. Visible through the transparent engine cover was not the stock Eaton supercharger I was expecting, but instead an individual throttle body intake - connected to two air boxes fed by twin Rotrex centrifugal superchargers! I'm told that this setup was inspired by a mix of Koenigsegg and Ferrari influence, and makes much more power on the same LS block than is usually extracted from the ZR1. Something I've never seen before, that's for sure.

Something I've rarely seen: center lock wheels. I have to say that, on this particular car, the look works excellently.

Outside was the shop's British Drift Championship car, painted with a rather, uh, "confrontational" paint job. I got a chuckle out of it when I first saw renders of the paint job, but I was surprised to hear that they actually printed the wrap like that! Still... funny to some tastes.

At least they're not joking around about the safety of their car. Proper cage and fixed-back seats; and I was wondering about the stock steering wheel and whether or not it had an airbag, until I looked closer and realized it was one of the non-airbag types that they fitted to some early ECR33s as well.

At least the paint was really good looking, underneath the Dogeritolicious wrap.

These wheels looked mega expensive, and were really cool to look at (and fun to photograph).

Sorry, S14, but you're being upstaged by your much cooler big sibling behind you. Keep trying (but, seriously, never stop having a sense of humor, even if that sense of humor might have to grow up a little).

Anyway. That's how my week went. I'm going to be back in the 'States before I know it. But for now, if you'll excuse me, I have a date with a helmet, an ECR33, and a skid pad...



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

The Prodigy

Hey guys. I'm new here, and I was told about this place by my buddy Parker. We live in the same town and hang out a bit, so I thought I would give this a try. My name is Darren, I'm one of those "trust fund" kids you hear about with super cars and all this stuff... Not really. I do have a trust fund, but I only dip into it for smallish things... Like my car. This is the second car I've had, but its a little special... Rolling into Maebashi, I set up come cameras to get some shots of me rolling past. That's my job, professional photography. My ride, is perfectly suited to the mountainous roads around Gunma. Shes a 1986 Toyota MR-2 AW11. It was originally a 4A-GE car, but it didnt have the power I wanted. I figured, "why not?" and dropped a K24 from a wrecked Honda CR-V in it. Its better, but not quite there. I AM however constantly getting overheating issues.

The ONLY thing selfie sticks are good for is getting tall shots like this...



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

Made some progress on the Civic! MX-5 rear axle and driveshaft is installed as well as some GReddy coils. I've put the temporary plates back on and took it for a spin. Or rather for a drift since you can't keep it in a straight line. Also fixed the front offset.

@Darren: Konichiwa and nice MR-2 😃



   
SupyPaw
(@supypaw_14402)
Eminent Member
Joined: 12 years ago
Posts: 38
 

Hello again!

So the time came and I sold bought my cars, unfinished Sirra and my daily MK2. For Sierra I just didn't saw the point, most of was the the rust, oh the rust... and it needed alot of work and love what I could offer...For daily MK2, well, I just wanted something RWD!

So two days ago a friend of my offered me his friends Nissan 200X, only for 350 Eur, but it wadn't registred, didn't have an engine and overall I could say "junkie".

And here's some pictures in my garage:

About engine, prev owner said that it had CA18DET in, but while he was on track seriously over heated it, so he pulled it out and left it, forgeten.

For now my plans about this car would be to get it in working condition, I'm still thinking about CA18 or RB26... and yeah, make it somekind drift missile/ rat -style.

More updates comming soon!



   
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

Dropped the Mustang at the Ford Performance Center I gave the bumper to and got an engine performance stage 1 pack. ITBs and a new fuel pump plus injectors - now boosting the bhp from 260 to 322. Also new rims and brakes for the added performance



   
Pinter
(@pinter_14768)
Reputable Member
Joined: 12 years ago
Posts: 326
 

# RinKK :
@JDM_Racer why would you swap out a perfectly good 4G63, a DSM without a 4G is a crime.

Because rice life



   
Bigg_Boss93
(@bigg_boss93_1370)
Member Admin
Joined: 15 years ago
Posts: 3835
 

# Harrison15 :
The green R33 back home is an S1. I think this is too, but I don't know the year or whatever. Marco has been, let's say, "coy" about the details of the car - no fair, in my opinion, especially since it's kind of a demo car! ("Street drift" car, aka, used for demostrations and exhibitions.)

Well you didnt ask in a direct way and i dont like when people tries to make me cough up informations.. ahah. So yeah, it's a S1 with a few S2 parts. 🙂

# Harrison15 :
I love the carbon diffusers on this car. I'd get something like this for the Supra if I thought they were good for aerodynamics or if they fit the theme of the car, but sadly, they are neither (and are outside of my budget while I hunt for more BCNR33 engine parts!).

Wacchutryinasayin', neggah? Those are handcrafted locally, yeah i know, it's "just a copy" of varis' ridox, i prefer my own quality rather than original's stuff(which often arent really detailed).

But i might just remove it now, you made me look like a stupid ass for having that. XD

# Harrison15 :
Another customer car: a Corvette C6, obviously not a base C6 Z51 because it had the wider GS / Z06 / ZR1 fenders, perhaps ZR1 especially.

That WAS a customer's car. He didnt want to pay us so the court assigned it to us as part of the payment for the work we did on it.. it didnt actually even repay the parts alone tho. :facepalm:

Anyways, i guess someone may have already noticed from Harry's pics from yesterday. Yep, i've got a new hood for my R33.

It's a carbon Top Secret hood Harrison took with him from the US, i love how it looks and hopefully it's going to be painted as the rest of the car very soon. We're just starting with the 127 now since basically we spent the whole morning "working" in the skidpad. :troll:



   
SupyPaw
(@supypaw_14402)
Eminent Member
Joined: 12 years ago
Posts: 38
 

So I got my hands on "junkie" and engine is in. For engine I went with CA18.... atleast for now.

Here's some pictures aswell:

Getting ready for engine

Aaannnndddd.....enigne is in

Time to test it.... :pimping:

Next up is suspension.....



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

Not too sure about the wheels, but the weather was nice so I went on a nice long drive. Car is also lowered quite a bit, but it is still static and will stay static. Also not going Liberty Walk.

I can't seem to find the right pair of shoes that make me happy with this car, so I'm going to have to keep looking. I may just settle with Work VSXX but I do like the concave style.

Scratch that actually, I've found the perfect wheels for this car and I'm going to get some tires on them today. That being said, I also have some forced induction plans for this car. Anyone want to come over and work on it?



   
Hyped
(@hyped_18966)
Reputable Member
Joined: 11 years ago
Posts: 258
 

Love that rolling shot Haku



   
Kazern
(@kazern_18915)
Reputable Member
Joined: 11 years ago
Posts: 460
 

so quick update the evo has started to come along nicely i have so far

  • debadged
    put coilovers new rims and slightly bigger breaks in
    tinted the windows and tail lights
    removed most of the front body parts and added top secret hood pins
    replaced the rear bar for a molded wide bar and door addons

but im still yet to get the head work done and looking at my bank its starting to get a little low might have to sell the bmw which is going sweet took that out to valo last night for some skids
anyway here is the pics



   
Smokiegun
(@smokiegun_11970)
Honorable Member
Joined: 12 years ago
Posts: 636
 

Just picked up my order for my overfenders for my GT86, I'll update the install later on. Still need a set of 18's..



   
Page 526 / 541
Share: