VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

On the way over, I stopped to get gas (livin' the 302 life) and there was a dank LS swapped R32, now, the typical JDM fan would become increasingly butthurt about the "ruined car" but, the thing was fucking mint. Anyways, I'm literally close enough that I can see the shop. Going to stop screwing around now. See you very soon.

Added 1 minute later:

Also, Marcus... That car is lit. (HAha GET IT BECAUSE neONS are liGHTS and theyRE liT)



   
GoverningNick
(@governingnick_10817)
Reputable Member
Joined: 12 years ago
Posts: 481
 

Tokyo Drift? Count me in.



   
FamousMan
(@famousman_8823)
Honorable Member
Joined: 13 years ago
Posts: 495
 

Been gone for a while doing 240 stuff. lots and lots has been done to it. wayy to much to list and im way too lazy right now. so heres some main things
2jz running and working
interior because racecar
rollbar because stiff racecar
new wheels, tires, and running gear.
new paint job again. I got tired of blue.
license plates!
New headlights, plus i got my other pop up to work.

Whatchu know about that matching game?

You guys mind if I stop over? We can do some street cruising afterwards.



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

Come by, just started the movie 10 minutes ago haha. S13 is under the knife again.



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

That 240 is fiiiiire. Going to turn my daily 240 into a mean street car like yours. Nice.

Hahahaha hahahaha parker omg



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

Is it OK that I had my friend drop the van, trailer and Supra off? I have all the engine shit and I want to finally get it installed...

The motor itself is in, I just need to put all my aftermarket shit on. All the parts weren't too hard to source, a Toyota Tuning shop has most of it in stock, and I ordered some on overnight shipping a few days ago.

Tonight I hope to have these things done...
-Engine assembled (not wired at all)
-New wheels on
-Bodykit installed



   
FamousMan
(@famousman_8823)
Honorable Member
Joined: 13 years ago
Posts: 495
 

s13 always under the knife 🙁 Can never make up my mind on what I want it to be.

Thanks marcus!

And ThatBoostedGuy, if you need a hand I'll gladly help you tonight.



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

Awesome. I have never fitted a bodykit so this will be something new for me. I don't have fender flares but I checked earlier, I should be good to go without them.



   
conkaa
(@conkaa_3045)
Reputable Member
Joined: 14 years ago
Posts: 291
 

so after searching for another 240 for a while, i found one
apparently he was going to tun it into a drag car? dont know why?? but what ever
its currently ls3 powered? no idea how he fit that in there but im not one to judge
he said he wouldnt go lower than 3.5k
anyway here is the car



   
ShadowPhoenixTar
(@shadowphoenixtar_19838)
Eminent Member
Joined: 11 years ago
Posts: 29
 

# ThatBoostedGuy :
the typical JDM fan would become increasingly butthurt about the "ruined car"

/rant

Well, the R32 is quite heavy, so I wouldn't mind, since the RB26 is quite heavy as well. If you swap a heavy engine with a heavy engine, to a heavy car, the power-to-weight distribution, and the weight distribution, wouldn't be too disturbed/ However if you swap a light engine with a heavier one into a light car, like for example a 110mm bore/stroke V8 with quad turbos into an AE86, I will have a talk with you.

/rant end



   
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

I thought about the Cobra R front bumper again - and came to the conclusion that I don't want to install an original one. With only 300 units ever produced I don't want to ruin an original one. I sold it to a Ford Performance Dealer that knows his stuff. Instead I got a gray Replica. Also a black Cervini spoiler, which will be painted in Ford Laser Red like the old front bumper. I also got black headlight housings - for the looks 😛 I also installed Coils and Springs (Onmi Full Body). I couldn't wait to install these things so I instantly took all parts off. Not the brightest idea to work on a car midweek. The Bus will do for 2 days.

Next thing will be a engine modification (intake, fuel rails, maybe cams, headers if I scratch the money together)
Sold the old yellow Civic too. The car wasn't worth much anyways



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

I've just finished mounting the rotary into the Civic. Was pretty straightforward but it doesn't run yet. No fuel lines, no wiring, no nothing. I have to re-route the exhaust pipe since the tunnel will be used for the driveshaft. I've also managed to get a Miata driveshaft + diff and they are at a driveshaft specialist for some modifications. I gave him the measurements it has to have so it'll fit nicely.



   
CALLmeSCOOBY
(@callmescooby_14433)
Reputable Member
Joined: 12 years ago
Posts: 359
 

Sup all, was lately more in lurk mode, was waiting to get few things seteled to post update.Basicly as u know the Golf was almost done last time and its all done till now and its registered and on the street.Love the clean look.

The reason i was waiting was that we needed a new daily since me and my darling are arguing owe the daily all the time.And in the end i ended with a new car and she has now the E92.

Its a 97' Audi A4 B5 1.6, its haveing 250000km and its in rlly mint condition, the engine is rlly exhausted but works perfectly fine.picked it up for arround $3000.Its previouse owner put some BBS rims on it but oiweral its stock.Drives good, feels good, guess its time to ruin it. 😃

cheers



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

Last night I finally put the finishing touches on an S13. If you've been around for a while, you'll remember my rotary powered 240SX which i spray painted. It was dubbed "Sharkey" and was sold, however I bought it back a while ago and never mentioned it again. You may also recall that I converted my S13 back into an onevia. I actually got that front end from this car and put the S13 front end onto sharkey, to put Sharkey V2 in motion. Believe it or not, after owning so many S13s and 240SXs, I've actually got a whole room dedicated to S13 model parts, including aero, lights, interior bits and pieces, and anything else you may need to put one of these back together. I put my left overs from the other S13 and revamped this car. It's true to what it was when I bought it, though not the original engine it came with, this one has a 13B that should put out anywhere from 500 to 700 wheel horsepower. It's a bridge ported twin turbocharged rotary running all upgraded internals and can run 98 Octane or Racing gas depending on what I want to put in. Revs to 9K and the sounds are insane.

Day time pictures will come, and I'll either paint it or spray paint it just like the original sharkey.

Spoiler:



   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 

Wow, nice work with that. That's almost too nice to paint with a rattle can, tbh.



   
Page 517 / 541
Share: