Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
I like the Evo and the R32, hope to see nice builds with them!
@Tom thanks man for the filter! And the lines 😃 So I see we have the same type of cars. What will you do with the Caprice? Restore it or do something else with it?
# Facepalm :
@Tom thanks man for the filter! And the lines 😃 So I see we have the same type of cars. What will you do with the Caprice? Restore it or do something else with it?
You're welcome :awesome: For now it's my daily until I have gathered all the parts needed for the hemi. Maybe some new paint, other wheels... It has a LS3 in it so it is a good base for further mods
Finally I got all the parts for my car, I'm choising the color and next week I'll call a guy that ask less money than the paint shop for paint the car.
I tested some stickers, gonna decide which to keep and which not. Look forward to a cheap set of rims possibly 16 or 17 inches.
The Genuine POS is now rolling on the streets! I finally found all the parts for the engine, and drove the bastard all the way to Liberty City! Will post pics soon.
(Note: If I can get Valo city to fucking work, I'll post pictures of it in Valo too 😃)
So, bushy came and got the extra parts, but he tried to peel out of the lot... I think your tcs of acting up... The car jerked foward and backward repeatly, very violently, and the tires seemed to try to squelch...if you need help fixing it, or even disconnecting it, just let me know. Im really good with pcms and ecus
Here are the pictures. I had to cut a hole on the hood so the filter can fit.
And here it is on action. I have to jumpstart the car sometimes, or give it a push.
Here is my s15 showcar I did months ago 🙂 Im thinking or selling my baby and geting a rx7, the oilpanS are eating my money too 😃 maybe Il keep it, you will never know lol 😃
# dxg1997 :
So, bushy came and got the extra parts, but he tried to peel out of the lot... I think your tcs of acting up... The car jerked foward and backward repeatly, very violently, and the tires seemed to try to squelch...if you need help fixing it, or even disconnecting it, just let me know. Im really good with pcms and ecus
If you want to help disconnect it that would be great. While I was in Japan after winning the AE86 I stopped at Up Garage and picked up a used TODA exhaust system. I have also ordered a new bodykit that should arrive soon will post pictures when installed.
Added 2 hours 55 minutes later:
Just sent the AE86 out to wrapped, it's a lot cheaper then getting it painted. Post some pictures after I get it back.
Sure man, just bring it on over whenever, and we'll see if she'll peel out after that....
Added 1 hour 42 minutes later:
So, uhm, really bad news guys... Irl, 3 of the 4 main capacitors on my motherboard blew... In short, my computer is most likely FUCKED... Hopefully, I'll be able to soder replacements on till I get my new one in Decsmber, but until then, not gonna be able to post pics, cuz im posting from my 5 year old phone... Anyways yeah. Everything in the computer appears to be okay, but I was expecting this to happen... The entire computer minus the case and psu is about 7 years old... I've been limping along an nvidia 680i sli motherboard, intel core 2 duo 2.4 ghz cpu, nvidia evga 8800 gts sapphire series gpu, and a 300 gb western digital hdd, thats from the PRE SERIES era, before blue, green, and black series wd hdd's... Ah, jeez I need an upgrade...
@Robustock : thanks ^^ Here's the continuation btw
at the next day, i bring the wreckage into Yamada-san's backyard garage (which is quite large, tbh). his garage notoriously known as the best tuning garage around Hiroshima. We ordered Blitz to tune and develop the engine, they happily agreed, but they said the engine shipment will takes a bit long time due to the shipping issues. Here's the photo when we first bring the chassis into the bay.
I repaired the body, while Yamada-san works at suspension setting and brake stuffs. We're currently using Tein shocks and brembo Brakes.
Oh, and he told me to paint the car to white, dunno why, but it quite looks good.
Then we put the wheels into the car, it's a replica CE28N, it looks very similar, but it looks like going to broke anytime, it's a placeholder anyway 😛 .
and due to the suspension setups , we installed a 50mm widebody fender, because drift car.
The next day, the engine finally came. It's a fresh RB26DETT, it produces about 620HP as the mail that comes with the engine says. Abit huge for us, but we'll try to master it, no matter what. It's free, anyway 😛
At the afternoon,we're trying to tame the monster around Bihoku, but we're fail to control it, as the rear end is unstable as hell and the wheels makes a huge crack. Damn bootlegs!!
then we spend the night with try to eat a strange food with a tortilla wrapping in it, dunno what it called since we knew nothing about it, but it makes Yamada-san
getting a diarrhea, for some reasons. Get well soon, dude.
Since Yamada-san was sick, now i'm doing this alone. i put some wings and rear diffuser, and new rims, since the old rims are broken in half, now it's a LEGIT CE28N. I'm not going to buy or use bootleg rims anymore, meh.
then i put some sponsors stickers due to sponsors agreement, and as quickly as possible i try to put it on the track to test it. Here's the car before the action :
I haven't test it properly, but i hope it gonna ends well.
(sorry for the long post btw, i really enjoyed writing this 😛 )
So finally after almost 2 months of gathering, fitting and swearing I have got a complete 426 HEMI.
This is what I have started with:
And this is how it looks now:
It has 407 hp and runs on 95 octane pump gas. Good enough for the beginning, I guess. Maybe I will get an intake with 2 4bbl carbs but first I'll do a suspension upgrade.
Hey guys!
I've been following this forum for quite some time now but never really posted anything. Mostly due to the fact that
I'm a complete noob with photo editing and pc stuff in general. But after looking up some things I'm finally ready for my post!
Btw if I do any mistakes or you have some good criticism for me I'd appreciate it you told me. That way I'll make sure it doesn't happen again!

So I picked up this beater. It's a 1986 Ford Sierra with over 350k miles on it. As you quite clearly can see it has some rust on it and a hanging bumper. After all it's not a new car and on top of that the guy that I bought it from used it as his daily for many years. He said i'd could have it for 200 bucks so I went for it not knowing what a pain it would be...

After I got it to the shop and did a further inspection on the car I discoved that the block had a big crack in it, making the engine pretty much worthless to me. I could repair it or buy a new block but since I'm on a tight budget that isn't an option for me.

While bummed out about the news about the engine I went ahead and started inspecting the suspension and undercarriage. I found out that the suspension components were busted and needed replacing also that there were large amounts of rust in the undercarriage making the car even more worthless than it already was. At that point I realized my plan of repairing the car and selling it wouldn't go hand and hand with my budget. So now i'm sitting here with my Shitierra not knowing what to do with it. I could scrap it but it didn't feel right to do so just yet.
Hope you enjoyed this. I will back with more once I figure out how you liked it 🙂 Thanks for reading!
Finally! I've got the wheels that will perfectly match the Evo, here's a picture of it already installed in the car
and yes, that is the TE37, in black, and it suits the car really well
oh yeah, while I'm waiting the wheels arrived 4 days ago, I also sourced a lot of goodies such as carbon fiber doors, bonnet, and trunk, custom bumpers and side skirs, Evo 5 wing, front and rear RalliArt black strut bar, and a custom exhaust system with a Kakimoto muffler, luckily the parts arrived just 5 minutes after the wheels arrived, how awesome is that!, so I installed nearly all of them into the car, and here's some of the picture after I installed them
btw, here's how the car sits now, I lowered it 1" allround after installing the bits
and after that, it goes to the paint shop (yes, the CF parts will be painted as well) for 5 days
==5 days later==
Finally! the car is back from the paint shop, the painter sure did a very good job painting the parts, especially the CF bits that need more attention to paint, here's some picture of the car
and here's the picture of the strut bars that I installed after the car back from the paint shop
there'll be more to come after this, and it will involve some Horsepower (and Torque, of course!🙂)
Got new wheels for the E34... also got a lip for the front bumper, roof spoiler and a small trunk spoiler added during the last week or so. Wheels that i bought are Borbet As 16''. They also came with slightly used tires. Got the new H&R coils set installed over the last few days, but didn't play around with the setup yet as I'm content with how the car sits at the moment. After the winter I'll be buying some proper wheels in 17 or 18'' and then I'll be playing around with the car's height setup.