VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Smokiegun
(@smokiegun_11970)
Honorable Member
Joined: 12 years ago
Posts: 636
 

So its been a rough few weeks ongoing, I went over to Derip Hill with my 240sx in tow on a truck bed. I met up with my good friend Marcus and we got the engine mounts and the 2jz installed, and we immediately went to the cosmetics, we installed the spacers and I left the car there over the night, a week after that the parts I have ordered have arrived, turbo manifold and turbos along with the kit, and a URAS Kit. other than the front bumper everything went on flush, a week after that I got the new Ag Forged F110's and got the spacers adjusted for the maximum flush. XD I hope you enjoyed the 3 week festival of me putting my car back together.



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

New Year New Style

New RP coming soon...




   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 
(Am I the only person on here who hasn't restarted their RP here at least once? ;p )


   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

(You're one of the guys who are a rare sight around here. So basically...yeah.)

My brother Makoto showed up in his '99 Altezza. It has coils, Enkei Tarmac EVO rims, a Kaminari bodykit and a 2JZ swap from the JCE10. The 2JZ has been converted to single turbo (Remember, the JCE10 has a N/A 2JZ) and he has a hard time not to burn the rear tires. It got too expensive for him to regullary change the rear tires. He will replace the brakes soon.
Also found a K20A at a local auto wrecker. Came out of a 2004 Integra Type R and is complete with wiring harness and transmission + axles. He wants 240,000 Yen (about 2000 USD) for it.



   
CreeperPwner
(@creeperpwner_17814)
Active Member
Joined: 11 years ago
Posts: 12
 

Hi guys it's my first time writing here.
I just bought this Scion FRS form a ricer that managed to roll it down a hill while trying to drift it stock.
I bought it for $3500

It had a rocket bunny kit which ill probably remove.

It doesn't seem to have much internal damage but it has fully stock suspension and an i6 which ill swap out.
I will most likely make it into a bash car to practice drifting.



   
Polar_Explorer
(@polar_explorer_19296)
Active Member
Joined: 11 years ago
Posts: 13
 

BAM! There is a very BIG post coming. I wish Tom Diablo will see it and give some kind of mark because i'm new to text roleplay and my first attempt was really fail. Anyways, here is a continue:

Ford Dragstang 2016:

Remember that Ford i've showed last week? The original power was not enough for me so i decided to convert my Ford into a dragster. So what dragster need?

First i've installed the brand new rear suspension with 15x11 Firestones. The front suspension is still untouched, i will tune it later.

So the original engine also needed the power. Performance Mopar supercharger were installed by me but i've didn't photographed it so i will show ya only the new front end with fiberglass parts because they are lightweight and more commone that original parts. This picture was actually taken after all the body work because the fresh painted bodywork is better than harlekin german craziness.

\

All cars that have powerful engine and created for racing need rollcage and seats that will protect drivers dumb head so i threw OMP WRC seat and a basic 4-5 level rollcage. The steering wheel is original because other steering wheels were not so comfortable.

Honda CRXtreme

Remember dat Honda CRX with HKS twin turbo? Ultimate power is returning. Power needs control so first step was brakes. Brembo brakes with 6 piston calipers had really good looking but they are also needed the new rims so i've took old wheels that was meant to be used in Honda Civic 1994 project before that Honda were totalled during truck trailer rollover. Stupid sleeping drivers. They are dying on the road and crushing cool stuff.

Before

After, new Tein Drift springs are also found their place in car suspension.

So now it's bodywork time, the brand new CarZone bumpers and side skirts were installed and painted in dark gray color. The mufflers are also was from CarZone team but the wing were from Wing West because it was bigger and looked really good.

Stay tuned for new updates!



   
CreeperPwner
(@creeperpwner_17814)
Active Member
Joined: 11 years ago
Posts: 12
 

Update #1
So I managed to remove all the Ricey/Damaged panels off of the FRS

I decided to keep the rocket bunny fenders.

I'll be removing the I6 either tonight or tomorrow.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

@Polar: I did see it 😃

  • Working on 2 cars at the same time costs lots of money and time. When you have a full-time job you don't have the time to do big jumps like that. Also parts tend to be expensive. The best way is to do smaller updates or time skip several weeks for one big update. (Like -->2 weeks later<-- ) Some guys like to skip time, some don't. It's up to you.
    -You might want to leave the workshop for photos since it looks better on a different map. Check the "Tracks" in the DL-section. When you grow familiar with photographing I would also recommend using an ENB mod. (I use Coprone's ENB V2)
    -If you need to do screenshots in the garage (incomplete car) you should cut out the menues with the picture editing tool of your choice. Looks better.
    -For later builds: Use google to do some research on the car you want to build.

@CreeperPwner: Welcome, but how does a I6 fit into a GT86/FRS/BRZ? The tips mentioned above will improve your RP, too.

@all: How about a tutorial thread? So newcomers can read tips and tricks made up by all of us so they can do a neat RP right from the start.



   
Polar_Explorer
(@polar_explorer_19296)
Active Member
Joined: 11 years ago
Posts: 13
 

# Tom Diablo :
@Polar: I did see it 😃

  • Working on 2 cars at the same time costs lots of money and time.

-
I'm not working on 2 cars at the same time. I've just made progress on one car, then moved on another and didn't posted any information so i decided to make a big update post. Next time i will try to make smaller updates and not spam at the same time.



   
Kazern
(@kazern_18915)
Reputable Member
Joined: 11 years ago
Posts: 460
 

so the silvia is almost done exterior wise i might keep it fairly clean and usable i got the guys down at the garage to put a body kit on while it was in painting so its saves money and time and i changed the color on the registration and ill be putting the plates on it to go out for a bit



   
FamousMan
(@famousman_8823)
Honorable Member
Joined: 13 years ago
Posts: 495
 

# Harrison15 :

(Am I the only person on here who hasn't restarted their RP here at least once? ;p )

Pretty sure there's still a couple of us who haven't restarted yet.



   
JdmSly
(@jdmsly_5934)
Honorable Member
Joined: 13 years ago
Posts: 693
 

Hey guys! Happy New Years! This means new beginnings for the 240! but i have only recived one thing in the past week which was a ebay ducktail for around $120 also sadly you know what happens when you drift when you are really low with aero you damage it 🙁 sorry for the single photo this was from my phone 😃



   
Hyped
(@hyped_18966)
Reputable Member
Joined: 11 years ago
Posts: 258
 

# FamousMan :
Pretty sure there's still a couple of us who haven't restarted yet.

same



   
GoverningNick
(@governingnick_10817)
Reputable Member
Joined: 12 years ago
Posts: 481
 

Alright guys, miss me? I was the kid with the blue Miata with the 302 motor in it. And, I'll tell ya, a lot has gone down since.

"What did you do Nick?"

Well, it looks something like this.

"Uhh, yeah officer, this thing is street legal."


Not Safe For Petrolheads


3/4 Shot


DIY Low-Pro and the open intake knows what's up.

Also, you guys remember the red Miata I picked up, right? Well, basically, it still doesen't have an engine, but I managed to pick up some awesome front fenders from an old friend of mine. Then, my order from Autokonexion came in....

"Hello...."


"It's me."


"I was wondering if after all these years you'd like to meet."



   
Kazern
(@kazern_18915)
Reputable Member
Joined: 11 years ago
Posts: 460
 

so here is the s14 now i swapped the wheels around because why not and now i kind of regret the paint change and actually want the brown back aha
im going to daily the s14 for a while and i might even build a shitty misile for some fun

Added 2 minutes later:

oh and im ordering rb engine mounts and the engine soon!



   
Page 491 / 541
Share: