Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Guys, i have good news, the Kenmery is back with its new paint!
After some good Christmas parties i'll start putting parts back on.
Soon on the road!
Spoiler:
# Coprone :
Yo yo yo yo yoo. I haven't done any post here for weeks, maybe even a month! I completely slammed the CRX I have & then destroyed one of my pistons. At least, I think so.
As my red Kouki S14 was shipped to Estonia, I bought another Kouki. It was one of my teammate's ride but he got himself 350z. It's quite interesting one, so here's spec list:
- 1999 Nissan Silvia Kouki (chassis s14)
- Swapped 263HP F22C1 N/A engine from S2000
- D-Max type 3 kit (skirts & bumpers)
- Kouki wing
- Stock exhaust with unknown muffler
- Brembo 6 piston caliper holding 332mm racing disk on the front;
Wilwood 4 piston holding 278mm racing disc on rear.- R34 GTR driver seat & steering wheel
- Rollbar with full interior
- 326 power coilovers
- SSR Vienna Courages 18"x10" in front;
Work Emotion CRs 18"x10" in rear.That's pretty it. What I want do with this drift car? Drift it. Aaaaaaand really wide stance too. Almost like Haruki's ride, maybe,
?oh=c02e0753cd0ebe770407eec128709c06&oe=56D43C17
Oh & photos too...
Hi again. As someone already mentioned, stock F22 isn't the greatest engine to drift with. I had a total rebuild in mind, but at the moment we were low on money to change everything.
We swapped the crankshaft, the camshafts, intake manifold & exhaust. Why? Because vtec with turbo yooo. "New" parts were only new to us, so they're a bit worn. I totally forgot to dyno my car before modding, so the amount we probably got was 90 horses.
Engine bay is really clean, almost a showcar or something. Katsumi almost managed to drive my hood off, as he was entering the garage with hood aka bonnet opened 😃
After a hard day of work, all cosmetic parts are back on the car. There is still some work here and there but the car is 99% finished.
Enjoy some pictures :
I don't know what i'm going to do with it. Some people already told me they wanted it for a huge amount of cash... Well maybe it'll be time to buy this RX-7 of my dreams.
(i don't know i'm frustrated about RX-7 mods there's always something wrong and Mr Sir's engine don't fit none of them 🙁 )
@ Haku : nice offroad, its a good idea. I hope you still have your Skyline i'll come see you tomorrow when mine is fully done.
# CALLmeSCOOBY :
So we picked up a BMW E92 320ci Coupe.
The E46 was the only 3 series that featured the 320ci engine, no E90 models has them
# David_2709 :
The E46 was the only 3 series that featured the 320ci engine, no E90 models has them
e90 dint came as 320ci ,and 320ci is just a model designation. And he has e92, e90 is a sedan.
E90 = sedan
E91 = wagon
E92 = coupe
E93 = cabrio
Are all 90s? Yes.
320ci
3 refers to the model (3 series). 20 refers to the engine. i = petrol engine; Ci = coupe. Ci was only used in the E46 of the 3 series. I wrote that the E92 had no Ci engine.
The stickers arrived, the hood is black and thanks to David (who save me the location of a good allignment shop) the allignment is all done now. I've also replaced the rusted muffler with a Megan MR2 one. Didn't change the noise level (still loud) but at least it has no rust.
It's like I'm back in Osaka again. Found a guy with Watanabes in LA. Going to check them out and if they are OK, I'll buy them. According to the dude selling these, they were on his Civic and when his wife got pregnant he bought a bigger car and sold the Civic with its original wheels. So the Watanabes are basically sitting around collecting dust.
The Cressida needs a tune-up, too. Just the usual stuff so it's allright.
Happy holidays,
Back in Valo for a bit, wheels and tires were a gift from the GF, suspension was just an impulse buy. Rollcage was also made and installed temporarily, still has a bit of work needed to be finished. I love driving this thing, though it's a bit scary turning in, I'm so used to a low center of gravity.
so it's been a long time sice i posted something, and a lot has happend.
do you remember the Holden i was building? It started ass a daily project when i bought it, turned out to be a racer,
and then burned down when some punk set fire to my garage..
It looked like this after the fire
Well, that is some months ago, and a lot has happened to it.
I spendt like two months just stripping the body down and repairing all the body damage form the fire, removed the hunk of metal known ass a RB26DET, and all the suspension..
rebuildt all the mounts, removed the rollcage, and vacumed out what was left of the interior..
then it was time to start over, the body now beeing straight, i put some primer on it, bolted on the brand new Ksport suspension and brembo/Project NU brakes.
got everything test fitted and sendt it out for final paint. with no front clip..
Last month, the engine block arived at almost the same time ass some bodyparts and the radiator, It's a LS2 329 block with a 90 mm bore and a 90mm stroke. Bolted on a ZR6 style roots supercharger and a NX nitrous system (just to be shure i have the power i want, when i want)
the engine puts out a healty 508 BHP and 610 NM att the weels.
it was a tight fitt without the radiator and front bumper instaled.
and even tighter wit the rdiator, bumper and headlights in place.
now i eam just waiting for the hood to arive along with some other boddy peaces, and i hope that wil be the end of this build.
got some new ideas for what my next build will be, but i'm not saying anything until i decide 😛
btw, does anyone have a 2JZ block laying around? I need one for my next project! 😛
# Tom Diablo :
Welcome!
Don't want to nag about your first post but if the roof is squished down like that, you need a new chassis. You can't take the roof from another car and weld it on there because the stability would be lost. You also can't bend a squished roof back because of the stability issue. That's why a car like this is considered a total loss and is crushed (or shredded) at the junkyard.
Ok, sorry about this, i will delete post.
No problem. Maybe you should try a different approach. Like introducing yourself, what car you are driving right now, what your plans for future builds are... Just some ideas.
Hello guys, lemme join y'all.
While looking for new daily (yep, currently I'm living dat bus life) I noticed that there was a Miata for sale.
Price was good, so I jumped on it and went too meet the owner.
After checking the car there are some pros and cons.
+:
Engine is running strong, gearbox is fine, factory LSD (I'll have to test it 😛 ).
Some coils in front.
Decent brakes.
Clean stock rims.
Interior is mint.
-:
Rust (hood, front fenders, side skirts).
No top.
Exhaust was so rusty it fell off while driving home.
Rice wheel.
Tires are shot.
After small negotiation I picked her up.
Some pics:
There are a lot of plans for it, but I have to pass inspection ASAP and daily it till I get something more daily-ish.
@[justas]: Nice looking Mazda. Goof pickup for a daily!
@Marcus: You willing to drop by so we can install the new kit that arrived on the car, just a couple of bumpers and it'll be fresh.
I'm down. I'll be around tomorrow since it's a little late and I'm test fitting some aero on my car.
Fit some fresh Version Select aero on the car and tried on a Vertex Ridge carbon splitter/canard combo. Looks mean.


# marcus915 :
I'm down. I'll be around tomorrow since it's a little late and I'm test fitting some aero on my car.
sounds good. Thanks for coming out bro.
