VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

If that's not your style, I have this HKS Hi Power 3.5", yours for $100



   
CALLmeSCOOBY
(@callmescooby_14433)
Reputable Member
Joined: 12 years ago
Posts: 359
 

# Haku :
If that's not your style, I have this HKS Hi Power 3.5", yours for $100

nice i would love this one, looks more to what i had in mind.Ill come by tomorrow.

Thnx JDMgoatleg, i heard a straight pipe on the CA18DET, and the turbo sound just eats the sound, i was lookin for a muffler like Haku showed, thnx for the offer anyways.



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

As a kid I always loved drag cars, before I got into the whole japanese car thing. Here's something I've been working on with another shop as a side project, for quite a few months.

This is my 7.3 Litre V8 1973 Camaro. The list of work inside of it goes on and on and on, but to simplify everything, It's a supercharged dual carbureted 950HP monster engine with 890 ft-lbs of torque using C85 racing fuel. Wheels are 15x5 in the front and 15x13 in the rears and the car is insanely scary to drive.

On the opposite end of the spectrum, here's my drift car 240SX, finally painted and at a place where I'm happy with it. The blacked out style is something I've never cared too much for, but I wanted to go for something different that would make people double take when they see it overtake them at night.

This car has taken on a completely different style than I originally thought it would, but never the less I am happy about where it's gone so far. More power is the only thing I really want to change for now, but also I'm not trying to make it a competition drifter by any means.



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

This thing cost me $12000!

Sure it has no lights, windows and the suspension is fucked, but it runs amazingly! Going to dyno it tomorrow.

I picked it up from a good buddy of mine, that is why I got it so cheap...



   
fasukilla
(@fasukilla_120)
Active Member
Joined: 17 years ago
Posts: 10
 

hi, ive been saving up for a car and to do a drift project out of it and i finaly found one,a toyota jzx90 Tourer love this car !, the guy was asking 8k, i went to see the car, we met in a parking lot aroud my house so i can look at the car properly and i ended up seing alot of potential,the car is completly stock with jza90 shoes stock suspention but a 2jz n/abut automatic, interior was clean, front and rear bumper needed some paint job wich is not a really big deal but i used that as an excuse to negociate the price to 7k.. anyways here some pic of the new child

went staright home and parked this baby in my garage, so fun to drive even thoe its automatic

i have a quiet good budget for now and how i see the future! so i went straight up on the internet order some coilovers ! and hopefully i can find a manual transmition kit i wont be able to stand that PRNDL for to long lol



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

I hate the fact that I bought yet another car, but this one is quite special to me, since I've helped my friend Lewis build this car for the past two years, helping him through multiple stages of this car. It's an S14a, with an RB25DET under the hood, with basic upgrades. I picked up his car for $6000 since he didn't want it anymore, but he didn't want the car to get parted out, so I decided to buy it and make it my own. I mean sure, it's bought not built now, but I'm not going to flaunt the car like I built it completely.

1995 Nissan Silvia S14a

-D-Max front quarters
-Blade rear overfenders (+45mm)
-BN Sports front bumper
-BN Sports side skirts
-D-Max Type III rear bumper
-Top Secret 3.5 inch tip
-Tein Super Drift coilovers (HKS Hipermax III springs)
-stock S14a five spokes, 16x6.5 ET+50
-Cusco 2-way LSD
-Custom paint job, done by Garage Autohero

I took the car out for a mad rip, since this is drift ready, but thanks to my careless driving and ultra low ride height I managed to destroy most of the aero. No worries - gonna get this car back to the shop and pull the aero off.

The aftermath -

(I own six cars now, three of which are road legal. Insurance isn't too bad right now, and I might take one of them off the road again)



   
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

Found a guy parting out his FC3 and decided to get to get his fenders along witht he hood and glass.



Each sticker adds 50hp and since i don't have my engine in yet i really need those power gains lol.
I also got the engine from a friends old street racer i'll be using in it but i gotta make the mounts myself since so it might take awhile.



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

Does anyone know where I could get some aftermarket Supra parts?



   
2jzCookie
(@2jzcookie_11127)
Estimable Member
Joined: 12 years ago
Posts: 244
 

# Haku :

squirt I want!



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

# ThatBoostedGuy :
Does anyone know where I could get some aftermarket Supra parts?

Dex and I could import you some stuff from Osaka. My friend Ryo is a Toyota expert and should get you some good parts. If you have the money you can get a fully built 2JZ-GTE with a 3.2L stroker kit if you want.



   
ParkerFM01
(@parkerfm01_14658)
Prominent Member
Joined: 12 years ago
Posts: 838
 

# Tom Diablo :
Dex and I could import you some stuff from Osaka. My friend Ryo is a Toyota expert and should get you some good parts. If you have the money you can get a fully built 2JZ-GTE with a 3.2L stroker kit if you want.

Fully built eh? The Supra has an engine right now but who said anything about keeping that engine? I'll pm you 😉



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

Bought a brand new set of Work Meister M1's for my Supra. 18x10.5 ET+0 up front and ET+5 in the rear. I've set aside the Model 5's for later use. These wheels are so niiiice. I daily this car at this height, it's not as bad as you'd think, bottoming out isn't even too frequent, just not exactly super comfortable. Having 650 horsepower under your left foot is quite satisfying too..

My next plans with the car are to pick up a new diffuser, maybe side skirts, depends. I kind of like the clean body look.



   
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

I went with my dad to pickup my new car. He rode with his 318i. So now I am a proud owner of a RSX Type-S. It has a hole in the back bumper, but it doesn't matter since I don't like the Type-S bumper anyway, I might grab a Type-R bumper. The owner wanted a higher car since he has a lifted house.



   
romefree
(@romefree_10900)
Eminent Member
Joined: 12 years ago
Posts: 37
 

camaro street racecar project is coming a long great after a long weekend but the new motor is installed and i put a basic paintjob on it




   
Hudas
(@hudas_10)
Reputable Member
Joined: 17 years ago
Posts: 398
 

as always new project :troll:
SR20DE swap (even worse than ca18...)
front r33 brake/5lug swap with brembo supports and slotted rotors
z32 rear brake/5lug swap
Remus exhaust
Random r17 rims
custom front lip
Greddy oil cooler
Mishimoto radiator
Few ebay bits and bobs for suspension
Vstanced coils
And ofc someone already did the "pro drifter" aligment....

Plans are like always - drift missile :troll:



   
Page 423 / 541
Share: