Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Today was quite a good day. Brought my Chaser out to a small club meet at Ebisu Circuit for a nice drift session. What turned out as a nice practice day turned out to be an aggressive tandem day. My car started out clean, and as the day progressed, slowly became Ebisu spec.


320 horsepower felt quite adequate with my rear tires pumped up to 45 psi, and it kept up relatively alright to the built cars.

Coming into the jump drift, my hood flew open and I lost control, unable to see.

Slapped the wall moderately hard, but not enough to damage much.

Kept flying up on me after I slammed it shut, but I eventually got used to it.
At the end of the day, my car was a mess.


Surprisingly only went through two sets of tires in three hours. Got the car towed back to Derip Hill, definitely going to need some help straightening it up and then builing her up. The 2J is actually running okay still, a testament to how strong the motor is.
i'm there as well!
but i've arrived later that day.. i saw tons of skid mark and bumpers flying everywhere 😃 😃
track already empty so i'd take opportunity to take a photo :awesome:
duh.. look at that tiny brakes... it doesn't match with the car :facepalm:
they're slotted and drilled Brembo discs with 4 piston calipers, they're an upgrade from stock. I'm just a reckless driver lol
And also, got the Supra panels fitted from Giacomo, and did a little drifting.


It actually rubs so bad, need to lift it for sure.
# CALLmeSCOOBY :
Anyone still here from the older crew? Daniel? Doge? Haku? I se EyPapa got much better with buids, since i was last time here.
dxg1997
@Scooby, I'be been here since the start...
Same here
Finally done with the LS swap (i got tired of waiting to make it realistic)
I found a new bumper in junkyard and cut the welds on the left headlight because it was blocking air from the intake.

And a new rear tower bar.

And of course parking lot hooning


Still need new suspension tho.
Marcus, do you want some help with Chaser? I don't have any projects going for a while, so yeah, I have free time.
Everything has come to end, even if you don't want so.
This is my old VW T2 that I called "Swagon". It was repainted, modified, repaired. I loved working on it, but now, I want to find something else to do. Willwood 4 piston dynapro calipers, with willwood brakes aswell. Engine came from shimutshibu RC 300, I love those small and reliable engines. Hydraulic suspension tuned by specialists fromm SLR tuners shop. It was one of my first projects.


How it looked before

I am selling it, you can get it for 40,750$. Just please, hand it carefully
Yeah i'd love some help with the Chaser, definitely could use it straightening out the chassis hahaha.
That van looks sweet, not my usual cup of tea but I hope you find a good buyer.
# DeXXter :
Well thats the reason i don't read most of the stuff in here anymore. I like your build cause i got one and for god sake i didn't pointed it out to make it look like an unrealistic build but just to give you something to read about on the interwebs. Or did i said βlook at that idiotβ i dont think so.
Allright sorry if I made it look like that. I shouldve taken it as constructive critisism instead.
Thanks for pointing it out
Heading to the airport now to return the rental van and board my flight. If anyone at Deriphill could put the tarp in the trunk of the E34 on the car it would be much appreciated. The keys are in my corner of the shop. I trust someone will not steal my car, as it will not move under it's own power and also the fact that it is a massive turd.
Here is a shot of the car I took on the way home from detailing early in the morning. The new rims/rear lights look sick. This was obviously taken before the cambelt shredded itself.
I'm right near there. I'll take car of it man
# marcus915 :
Today was quite a good day. Brought my Chaser out to a small club meet at Ebisu Circuit for a nice drift session. What turned out as a nice practice day turned out to be an aggressive tandem day. My car started out clean, and as the day progressed, slowly became Ebisu spec.
320 horsepower felt quite adequate with my rear tires pumped up to 45 psi, and it kept up relatively alright to the built cars.
Coming into the jump drift, my hood flew open and I lost control, unable to see.
Slapped the wall moderately hard, but not enough to damage much.
Kept flying up on me after I slammed it shut, but I eventually got used to it.
At the end of the day, my car was a mess.
Surprisingly only went through two sets of tires in three hours. Got the car towed back to Derip Hill, definitely going to need some help straightening it up and then builing her up. The 2J is actually running okay still, a testament to how strong the motor is.
The trucks been through alot lately but, the front fabrication and attachment of the splitter was a success! The truck also got a straight pipe to dump exhaust. The next step after looking for bucket seats that will fit inside and the fabrication of a rear splitter is getting the truck turboed.
Sweet Syclone man, the front splitter isn't really in my taste, but it still is nice. Those wheels tho <3
For anyone wondering, I still daily the Tezzy, although there are a few little changes to it. I got a genuine C-West wing. I also got a Momo wheel, instead of the r34 wheel that was in the car. I also got new wheels for the S14
good news everybody! 320sx is still alive! Got her a new "genuine" csl airbox at least its real carbon :troll:
also went on dyno, happy with numbers and feel of car
perhaps biggest news are that 320sx is now sponsored by local fiberglass body kit maker, oh and new wheels 16x9j all around for moar lows
and one for the lulz and the trullz :troll:
also few shots in action, next step is getting it painted (next week) and by that i mean some primer and house paint since 320sx gonna make frends with wall 😃