VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

I was actually thinking about a V6 or V8, but something about putting a Nissan engine into a Toyota seems very "Naughty" but very appealing.

(you know where i can find a VR38 or VQ35? the only one i know is Blast's)



   
DeXXter
(@dexxter_1902)
Estimable Member
Joined: 15 years ago
Posts: 175
 

So today went by pretty cool, i mean i restored alot of Vehicles but when you do that you know what parts you will throw out asap
and you don't bother with them that much but getting Rusty back on the Street is a whole new experience i worked with Bimmers before
and i like them at least the old one.
Today i sorted out the Breaks and the bald Tyres.
what it did:

  • reworked and repainted the Calipers. 100$
  • got new Pads and Discs. 215$
  • BBS RS with nearly new BFGoodrich (dude lost the Caps worthless for purists). 150$
  • Cleaned it inside and out. 5$
    still working on the Car today. I'm looking for a E36 Hood i don't care about the Color but it should be in
    better condition then my old Hood.



   
NoahC
(@noahc_17716)
Estimable Member
Joined: 11 years ago
Posts: 157
 

# Smurf :
I was actually thinking about a V6 or V8, but something about putting a Nissan engine into a Toyota seems very "Naughty" but very appealing.

(you know where i can find a VR38 or VQ35? the only one i know is Blast's)

I have a VQ37VHR from a 370z that has 45 miles on it



   
DeXXter
(@dexxter_1902)
Estimable Member
Joined: 15 years ago
Posts: 175
 

ran into an awesome guy while i was Parts shopping.
he invited me to their next Club Meet and wanted to take some pics
of Rusty well naturaly i did the same.

Those Sawblades are epic.

Added 11 minutes later:

Also last Car Update today.
installed a Stock 325i Muffler instead of the Cheap and Rusty aftermarket semi Fartcan.

I somehow love the Parking Lot Repair it feels like back when i started working on Cars
with no tools, no garage but a lot of love for Cars.

Added 11 minutes later:

ALSO the Police brought me my Laptop that somehow survived and started without Problems.
so i dug through my old pics and found pics of my very first Garage i owned with my friends
and some Cars we worked with over the years. enjoy.

both Drift Tools of an old friend of mine, thats where my love for Bimmers
started, we parted ways cause he bought himself some new friends.

That was a massive Project Car a few years ago it was a City
sponsored build-off called "Valo built not bought" it were 5 Groups
with 10 People a whole Car Meet based around it, Chip Foose, Mike Finnegan and
Dave Freiberger where Judges, sadly we haven't won i think a V6 Powered MX-5 won.

a whole Resto-JDM owned by the Father of a Friend of mine it was mint condition
every bolt was factory new.

last one, i never ever did anything on that Car but it was a regular sight
at our Garage it was owned by a friend of a friend of a friend or something.



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

# 2jzCookie :
It sure has haha. But its a german tank so I can handle it. Allthough I did push it a bit to much this weekend but it should be fine!

Looking forwards to seeing the Mark II. Just holla at me if you ever need help!

Aight man, same here. Hmu if you need help or spare parts, not sure what parts from my Mark II would fit your Cuntpact but you never know 😛 hahah.

Decided to treat the RPS13. Took the SSR Formula Mesh off the Mark II and dropped them under this car, a better fit I feel like. Maybe I might have to invest in a second set of these wheels.

Big thing was the Nitrous Express injection kit. Provides a 200 horsepower shot, braided supply lines, 24 lb. bottle. I only use it to aid the mild turbo lag in the low RPM's but it is really noticeable.



   
Smokiegun
(@smokiegun_11970)
Honorable Member
Joined: 12 years ago
Posts: 636
 

So guys I have not been posting for a while due to me getting my stuff ready so I could go to my new garage in Japan. Due to my garage being too small and there being a carbon dioxide problem I decided to pack up and head a new direction, hopefully this will bring me plenty of opportunities to discover Japans car scene. So far my current cars are being shipped to my new garage, I've bough a 1986 Honda Civic for a solid price of $2,500. It has a nice and clean B18 turbo inside of the engine bay. I'm hearing a knocking sound every time I let off the gas, but i'm hoping I can get rid of that in my next update. (The garage is in one of the pics btw.)



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

Bee-R B5's + Toyo R888's + 1 Worn out BMW E34 Touring = Sexy

Oh, and I got to test drive something...



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

All my cars blew up and I died and got a $1000000000000000 insurance payout.

Just kidding, I've been too busy to post anything. Hopefully soon, though. Some nice builds going on currently.



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

Project BNR33 - Farewell

So it finally comes time to let go of the R33 - it never really got much attention on here, or from me, but I daily drove that thing, carrying parts for my other cars, it was quite the workhorse. Never broke on me, always gave me the 350 horsepower when the turbos spooled, never complained when I threw it sideways, and never caught me out. But eventually all good things come to an end, and I feel that my road with the R33 ends here - I hate to say, but I'm bored of the car. I bought it for my birthday and it served me well but I just want to move on to other cars. That being said, I'm obviously not going to be without a Skyline for long..

These are my final shots of the R33. Smokiegun came and picked it up a while ago, the feeling of watching your pride and joy drive away for the last time with someone else at the wheel is heart wrenching sometimes..



   
giacomo1215
(@giacomo1215_17683)
Trusted Member
Joined: 11 years ago
Posts: 51
 

Well boys n girls! I did a thing while I was in Europe.
First off, I should explain that I went there mainly for work, but I decided to stay a day or two with my buddies as well.
We went from Padova, in northern Italy, all the way up to germany to visit the nurburgring for a total of 989km on just that trip alone.. all in an Opel Astra!
At the ring, I spotted this mean looking e36 M3, it had some sort of mad GT kit on it, looked reeeal nice.


Then, once that experience was over, we went to Essen, a few kilometers North-east of DΓΌsseldorf to meet with my buddy Mick.. after that, I went back to DΓΌsseldorf and caught my plane back home. However.. before I got home, I called my friend who loaned me the Astra, and asked him if there was a way I could keep it.. He had too many payments to take care of and couldn't afford it, and I thought it'd be useful back at @marcus915 and I's shop just out of Valo City.. He said I could just take over the payments, and it'd be mine! So yeeep, now I have to find a way to register this bad bitch.


All I got to say is "fuck yeah."



   
TheSkidKid
(@theskidkid_6533)
Estimable Member
Joined: 13 years ago
Posts: 233
 

@marcus915 - It's always sad to say goodbye to something that brought you so much happiness isn't it? Well, now's the time for you to start something new my friend!

Anyways onto my part.

I have been teasing a new car recently and I doubt any of you have botherd to look but oh well haha 🙂
Anyways, here it is.

It's a 1997 Nissan 180SX Type-X (ahhhh another 180 build whaaa). It was imported into America back in 2007 and I picked it up for $5,350.00 from a dude just outside Palm Springs. It's a bit of a mix-and-match kinda car so I'll explain it a little so you guys all understand. It rolled out of the production line in 97' as a Type-X 180SX with a SR20DET on board. The owner who purchased it in Japan soon sold it to a guy who was pretty big in the drifting scene over there. He pretty much thrashed it and eventually, the stock engine went kaput. It was then swapped for a cheaper CA18DET which now still lies in the car. It also went through many body modifications including obviously the pig-nose which was probably just a deference upgrade. Amazingly, the guy selling it said it still has the factory rear bumper which is remarkable considering it was once a drift spec vehicle. The car came with all the papers from conversions and so on so it's very easy to track it's history. Car is fairly neat and only has 130K on it. It's been well used but looked after so there is little rust which is lucky for an S-Chassis.

So some of the things I will be doing to it include:

  • New engine (I hate the CAs so maybe a SR20)
  • Full re-spray (The dude who painted my SC300 said he'd give me a discount if I send it to him)
  • I will be keeping the pig-nose for a while but I will eventually convert it to a Sileighty

There's one more thing I'll add. As I mentioned, it was used as a drift car by a fairly well known dude in Japan. I managed to find an old american magazine in which it was featured which is mad. Kinda sad to see it sliding there and now just sitting as a POS in my driveway. Hope to get it doing mad skids soon though. I'll show some pictures of the magazine page in my next post but for now, I hope you all like my new project car.

Cheers fellas.



   
DeXXter
(@dexxter_1902)
Estimable Member
Joined: 15 years ago
Posts: 175
 

@SkidKid
Nice S-Chassis, never been a Nissan guy but always had a weakspot for those 180SXs.

Today was a very very good day. finaly got a call from my insurance i can expect the first payment soon
the first one will be for the Garage sadly it's beyond repair so i will move into a new place hopefully soon i
don't want to sleep in my Car or on the Spare Racing Seat in our Club Garage anymore. as soon as i get the Money i'm on Garage/Apartment hunt.
still nothing about the Cars but at least there might be an end to that shit soon.

worked on the Bimmer again today to get all the stuff done so i don't die while driving it.
what was done today:
-bought Used M-Tech Front Springs. 50$
-Alignment in a local Shop. 70$
-SPACERS!! 50$

I love Rusty 😃
next up:
-new rubber bushings on the rear axle
-new Breaklines
-checking the Vanos
-check why the Powersteering is leaking

I hope that shit is over asap seeing all your solid Project cars makes me want
to start a decent Winter Project.



   
klucifers
(@klucifers_10629)
Estimable Member
Joined: 12 years ago
Posts: 149
 

E34


So, like month or more i was roaming bmw junk ward, with a friend searching for 325 85' rear bumper, i was looking at lot of shels but none really poped my eyed and was worth it, but then rig came with cars, one of them was a facelift e34 with m tech, or what was left of it. When it was unloaded i went straight to it look at it cloaser, it was preety runed down but l saw the potential, checked the vin code, and it was full as fuck all you cloud wanted daytona violet 530i with everything. Then started talking with one of the owner of the yard, and started talkng price, well since half of the car was allready sold and engine was blown, we came to 950 euro.

So heres pics at friends where it was cleaned up, straigten out and welded.



All front cuted up, well for this i neither do l have the skills or tools, so just left it to the shop.

Here its is after almost a month all primered, and with some new donor parts.

Now, lm gathering parts for painting, and searching for a engine.



   
Hudas
(@hudas_10)
Reputable Member
Joined: 17 years ago
Posts: 398
 

Heyooo long time since last garage update.
Got myself parts hauler, g500 with brabus kit, airlift bags and amg wheels

daily got upgraded aswell, fully loaded gs300 with 2jz and auto box (hey atleast it has lsd).

aaand now for project car, lil bit of backstory full on jdm 350z which has been exported to usa after 5 years in japan and been driving there since (mad jdm street cred bro!)

so its a two owner since new and been looked after, kind of a shame to rip into this nice of a car but hey whatchya gonna do.

right after it was shipped to me it got send to fab shop for a rollcage and carbon fiber roof, also instaled some other cf bits and nismo kit, now its off to a paint shop.

gonna leave you with a teaser of color



   
NothingToDo
(@nothingtodo_15530)
Estimable Member
Joined: 12 years ago
Posts: 163
 

It's been a long time since I posted any corrado updates. Time to fix that.
Finally fixed bended wishbone, bought new shocks and springs (Vstanced set all the way 🙂) ) Also, gave it new ASR intake manifold. HP jumped from 193 to 213.
Bought new fender, rear bumper (old ones were broken if you remember). Other than that, new electric Porsche mirrors folding when engine is off.


Front frame is in renovation now, it was half rusted (only slightly, not with holes 😛 ). Bought new recaro bucket seat aswell. Not feeling like changing the passengers one right now. Rollcage is coming.

Oh, and took the Sharkie on a spin


Front bumper got slightly bended, don't kill me for that 🙂)



   
Page 399 / 541
Share: