VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

Damn did I do good on this car so far.

Street shark mode activated. I just purchased another 13B as well that I'm building outside of the car. Once it's done, I'm going to take out the stock 13B to keep or sell. For now I'm just in love with the styling on this car. BN Sports front bumper & side skirts, stock rear bumper, Rocket Bunny rear spoiler (meant for an S13, so excuse the mild fitment issues, I had to grind some of it down.) The car is lowered half an inch from the height I purchased it at, already have some great coilovers on it. The rear over fenders are still not wide enough to contain the 18x10 deep dish Weds Kranze Bazreias in the rear, while the 18x8.5 fronts sit nicely up front with some mild camber. I only bought the FC because I saw potential in it, and this is the kind of potential I saw. I love the looks of it, I might not even paint it. But we'll see.

Next, a very simplistic update on the R32 filled with lots of words and minimal pictures. Here's the basics.

I took the car that was RWD, and have now made it AWD. How did I do this? Well it's not simple at all.

I sourced parts from an R32 GTS-4, the AWD counterpart to the GTS-T which is not a GT-R, and then I had to modify the shit out of almost everything to make it fit and work properly anyway. The stock GTS-4 drivetrain wouldn't be able to support as much horsepower as my car makes, so it was basically a guideline for me to make the AWD system and then improve on it. But it works now and feels quite good. For the amount of money I've poured into this car, I should have just waited to get a GT-R, but it's about the travel along the way. Behold, my car on it's winter wheels.

and what it's running until then, probably.

Remember those SRT-10 reps I had on my 370Z a while ago? Well I've refinished them and slapped them on here like the crazy person I am.

Cheers.



   
2jzCookie
(@2jzcookie_11127)
Estimable Member
Joined: 12 years ago
Posts: 244
 

Where have I've been???

Spoiler:
I did life

SO..... with that out of the way I present to you......

Project Cuntpact: The POS Cuntpact That Feels Sorry For Itself

(FYI not restarting RP)

Before I start I'd like to say a few things to clear things up. Yes, I still have my MX5 and unfortunately its tucked away in a corner in my shop waiting for its owner to drop money into it... Due to lack of motivation to work on it and other priorities this wont see any roads soon.

Spoiler:

And the good ol driftslut E36.... She is still alive.... barely. On the last drift event my buddy and I missjudged a corner and smashed up the rear end perrty good. Bent the chassis, cracked the control-arms etc. Allthough it's fixable and will be fixed in the near future by my buddy. With help from our good friend sledgehammer the body will look somewhat like an E36 rear end again.

Spoiler:

Okay now the new project. By now you should be able to figure out what the project is. If not I guess I should tell you. Its a 1993 BMW 316i Compact. Said to have 102 hp and 141 Nm of torque from factory. Not sure how much is left from this old beast but its slow....to be expected. Nonetheless its a fun car to drive. I was getting used to the 320i(Coupe) so driving with a chopped off rear end Cuntpact took some time to get used to but eventually got it down. At this current moment in time I've owned it for three weeks and been dailying it the entire time. Mostly to save me gas money because the old Chevy truck loves to carve out my wallet. Another reason is to get a feel for the car and scope out any issues it has. Here as some of them:

  • Cracked exhaustmanifold
  • High exhaust readings( probably caused by leakage)
  • Right front indicator broken
  • Bad shock-absorbers(leaking)
  • Loss of power and torque in lower RPM range

So there is quite a few problems. I mean, what can you expect from a 22 year old car. Im still contemplating if I should fix all of them seeing as it's only gonna serve as a drift missile in the end. If I do end up fixing some of it, it will most likely be as cheap as possible. Allthough I got some upgrades in store for it. One of which is coilovers all around. I noticed my buddy had some TRM coilovers laying around so I might buy them from him. In terms of engine upgrades I will go for basic stuff. Open airfilter, bigger injectors, iridium plugs etc. For the interior im gonna strip as much as possible. Im gonna keep the front passenger seat for future ride alongs but carpet, rear seats and rooflining will most likely go. And an aftermarket steering wheel will go in. The basics pretty much. With this out of the way here it is.



There we have it in all its glory. This was right after I bought it. Drove it home, had no issues at all with it luckily.

The weekend after I bought it I headed out for my first drift event with it. Didnt expect much but managed to slide it farely good when I bumped up the tyre pressures. I borrowed some rims and tyres from my buddy along with some 20mm spacers for the front. Didnt bother with the back ones simply because they were so far gone I decided to shred them instead.

Spoiler:

Wheels fitted. Manly colour ftw!

One of the photographers snapped this photo of it sideways. It was up on a hill in case ur wondering.

There is more to come so stay tuned!



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

# marcus915 :
Yeah you can have the SR, but I want $1500. The motor's got a built bottom end and a lot of mods.

No problem man. I'll do $1500. I'll come pick it up in my new ride.

Spoiler:

Its the E34 I was talking about! I lucked out and got the version with the 4.0L M60B40 V8. ITs a 1994 E34, 540i, estate! How cool is that? Its got some fake TE37's and Vossens on it, with some cheapo suspension. The brakes however are decent, their 4 piston Wilwoods, front and rear. It's got ebay coilovers, and camber plates xD



   
gt3076r
(@gt3076r_7071)
Noble Member
Joined: 13 years ago
Posts: 1070
 

So, I ended up getting a set of used Megan Racing EZ- Streets off of a G35. Needless to say, it gets pretty damn low and I love it. They got a little physical wear but that's about it- works like new. My rear camber is off pretty badly and I still need those rods because my factory left side rod is damaged so yeah, still waiting on those. I also fixed the leaky power steering fluid problem and cleaned the fuel filter, which was dirty along with the air filter.

Here are some pictures I took after installing the coilovers:






   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

I put some wheels on the X90, the stock wheels have so much positive offset it sucks. Dropped a set of mismatched MB Battles on the car, they were sitting around in the shop so might as well throw them on. Tried out a new tire compound, Falken Azeni RT615K's. Might switch to their tires fully since they're willing to sponsor my garage which means free tires for me, Giacomo, and Will.

My wheels wouldn't clear the stock fenders and that's after I ripped out the fender liner. So I'm running fenderless for now until I want to hammer out the fenders or just buy new wide fenders. I put a set of the old S14 wheels and cheapo tires to kill just for the hell of it.

For such a big car, 280 horsepower really throws down, but it just isn't enough hahaha so expect some things to happen in the power department.

Fuck these tires right?



   
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

The Mark II is fly man.



   
Sekailain
(@sekailain_456)
Eminent Member
Joined: 16 years ago
Posts: 36
 

# marcus915 :
@Sekailain I'm down with $1100, but I'm not sure why'd you want my bent up chassis hahaha.

Installed the W58 five speed transmission, straight bolt in.

because it's a skyline 😃
i want to rebuilt it, can you tow it to my garage? 😃 :troll:



   
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

I decided to turn my Integra into an autocross car i didn't want to ruin the JDM front so i swapped with a friend.
I also forgot an engine pic last time so here's one i took before putting the hood on.

I found an Evo 9 in my price range that i'll be picking up in the morning.



   
mastro
(@mastro_9981)
Eminent Member
Joined: 13 years ago
Posts: 35
 

Got the coils a few days ago, also got my rim back from repair.
Got it all on the car yesterday, also did some headlight tint and added a few stickers on the window.
For now im happy with the Lexus since it will be my daily.

Today i made a small roadtrip to pick up this:
A 2jz swaped s13. It got coilovers fited already. Im thinking about making it a drift build.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

I finally got that V6 in. Had to do a lot of cutting, welding and so on. Had to make custom motor mounts and needed to grind off the perfectly round bolts on the front frame. Now it fits pretty good. The chassis had to be modified to fit the 5 speed transmission. The tunnel was too small to fit the tranny. Still have no drive shaft, no chassis wiring, no interior, no nothing. Only have the ECU and engine wires. Good thing I didn't go for a V8 or even an I6. This engine fills out almost the entire engine bay.



   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 

Finally got the JUN front bumper mounted to my Supra. I've wanted this one for a long time, for better intercooler flow. I ended up selling the Abflug bumper to another Supra owner for a pretty good sum.

Also, I picked up Stonedmonster's G8 wagon. The car was in incredibly nice condition; I might have to just keep it like this for a good while.



   
Jdm_Racer
(@jdm_racer_17702)
Honorable Member
Joined: 11 years ago
Posts: 560
 

So i was on a vacancy travel to japan when i found a old man selling his 1993 silvia s13 i asked the price it was only 275k of yen converting it was only 2.3k $ the car have the stock CA18DET and no rust only 43k miles im get impressed the only car problem is the doors interior was removed he will be the WARMACHINE MKII basicaly a replica but with more power on the RB26DETT im also ordered the engine and the new parts
HERE SOME PICS

Added 1 hour 35 minutes later:

When im drifting with my new car i hit the wall 2 times and lose the front bumper,driver door,mirror,silvia logo,rear bumper and the front right quarterpanel

So i removed the old partsand installed the old warmachine parts and some new partsthat was:brick headlights,gtr style grilland wihte and red taillights that i buy from JDM central at north valo.

Primed everthing.

Painted.

Installed the new engine preparation kit for the CA18 that includes an: AWD transmission 15%front 85%rear,new turbo,itercooler,turbo air filter and a cilinder head cover by TOMEI.

After some adjusting i get 343 hp confirmed by the dino.



   
mastro
(@mastro_9981)
Eminent Member
Joined: 13 years ago
Posts: 35
 

Went for some drift practice on the track today with the 240. So far ive notice i need more steering angel.
Car runs good and as you can see from the picture, i got a new pair of rims on the car. Used the stock rims and tiers on the rear until there wasnt any tier left on them.

There was a guy with a LS swaped ke70 at the track rippin it hard, made me more motivated to build the 240 for drifting after watching it do some mad skids.
Will try find a lock kit for the 240.

Some pictures from today. Media crew snaped them



   
giacomo1215
(@giacomo1215_17683)
Trusted Member
Joined: 11 years ago
Posts: 51
 

# Smokiegun :
Beautiful Z you got there! The Corvette switchblades really suit the car! Hopefully you can keep her going for a long time.

Thanks a bunch man! She's an absolute beauty to drive! 😃



   
Jdm_Racer
(@jdm_racer_17702)
Honorable Member
Joined: 11 years ago
Posts: 560
 

so i buy two new projects by 8k that arrived from japan here a pic of they at my garge an silvia s15 typer r and a vareitta

the warmachine will going be finished by the fture



   
Page 391 / 541
Share: