VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
NikiLauda
(@nikilauda_7307)
Trusted Member
Joined: 13 years ago
Posts: 83
 

Evo 6 😃



   
ErviDesigns
(@ervidesigns_17078)
Active Member
Joined: 11 years ago
Posts: 17
 

# Flearko :
Hey guys I need a daily, some ideas?

I'd go with the UFO, nice to use as a daily. Not too fast not to slow...



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

# Flearko :
Hey guys I need a daily, some ideas?

Cheap audi,
Volkswagens are always great daily drivers,
Miata is a great car,
E36's are cheap these days.

Personally I wouldn't recommend any of the cars I own for a daily except my daily drivers i already mentioned.



   
NikiLauda
(@nikilauda_7307)
Trusted Member
Joined: 13 years ago
Posts: 83
 

M5 E39 also is good. Agree on E36 , I had a 316i as a winter beater.



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

You should go with a 1999 Honda Civic Si Coupe.



   
JDMgoatleg
(@jdmgoatleg_10289)
Estimable Member
Joined: 12 years ago
Posts: 135
 

(restarting rp because my slrr died)

I my name is Stephen, I drive a K20A Swapped Eg6

Im looking forward to buy another Eg to make into a drag car, but that is going to take massive chunks out of my wallet.
I will most likely use the moter out of this civic and put it into the next eg and probably put in a B18b.



   
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

(OOC: Restarting my RP since i switched to BB93's MWM)
Well the other day i was on my way to trade my daily and when i was gone my uncle's garage(Where i stored my Beetle and S13) caught on fire and now their both gone, but luckily his insurance covered them so im not completely fucked. Here's some pics of the progress i made on the beetle but didn't post LINK

Anyways, here's the new daily.
1990 Legacy RS RHD with a EJ20 and STI front bumper



The rims are outrageous so im definitely switching them but i might keep them for a euro stance build.



   
FamousMan
(@famousman_8823)
Honorable Member
Joined: 13 years ago
Posts: 495
 

^ That things gonna look sick when your done man! can't wait



   
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

# FamousMan :
^ That things gonna look sick when your done man! can't wait

Yea hopefully, im planning on doing an STI swap and maybe some new paint.



   
RotaryProblems
(@rotaryproblems_8664)
Active Member
Joined: 13 years ago
Posts: 12
 

( Starting RP, hello 🙂 Warning TL;DR I like RP 😃 )

Hey there my name is Brandon. Haven't been in Valo for about a year and a half... I was living up north while going to school and working part time. Here are a few projects I built or worked on before I left.

Spoiler:
BMW E39 M5 - The last car I owned before I left Valo. Got it for a steal due to a kid mistreating his Father's car, my friend and I rebuilt it. Sold it before I moved :/ Loved that car... and can't wait to get another one.


GS300 - This was my swegwagon which I took to drift on the weekend. Before I had the M5. These photos were after I cleaned it up, the fenders (and a lot of stuff) were destroyed, lol.





SC300 - My buddies' car. Helped him build it so we could drift our Lex's together. never ended up finishing the paint before he sold it.

Altezza shop car, sadly wasn't mine, but the demo car for the shop I worked at. Although I pretty much built the entire thing myself 😛


Anyways enough about my history. I'm back home in Valo City now, and itching to get back into the scene. 😃 So I found myself a cheap ugly E36, someone decided to paint stuff all over. I will be using it as a drift car/daily for now. Til I can get something nicer.

My buddy hooked me up with some coilovers and let me borrow his wheels to test fit:

Sorry about the crappy pics, I got a cheaper phone to save money for a car when I got here lol.

When I got the car it had been hit from the side, had to find a replacement door and skirt, which I nabbed from a 318. Also used the left skirt, trunk, and front bumper. Also went to my buddies' shop and made up a free exhaust. 😃 I'll have to run it like this for now.



   
ErviDesigns
(@ervidesigns_17078)
Active Member
Joined: 11 years ago
Posts: 17
 

# RotaryProblems :
( Starting RP, hello 🙂 Warning TL;DR I like RP 😃 )

Hey there my name is Brandon. Haven't been in Valo for about a year and a half... I was living up north while going to school and working part time. Here are a few projects I built or worked on before I left.

Sorry about the crappy pics, I got a cheaper phone to save money for a car when I got here lol.

When I got the car it had been hit from the side, had to find a replacement door and skirt, which I nabbed from a 318. Also used the left skirt, trunk, and front bumper. Also went to my buddies' shop and made up a free exhaust. 😃 I'll have to run it like this for now.

Damn! That e36 looks like it's going to need a lot of work! If I was you I'd get it a new paint job asap! Can't be cruising in Valo like that 😛 Good luck on your project 😉



   
RotaryProblems
(@rotaryproblems_8664)
Active Member
Joined: 13 years ago
Posts: 12
 

Yeah have to work with a low budget 😛 And yes I'm thinking about Alpine White! Thanks man.



   
ErviDesigns
(@ervidesigns_17078)
Active Member
Joined: 11 years ago
Posts: 17
 

# RotaryProblems :
Yeah have to work with a low budget 😛 And yes I'm thinking about Alpine White! Thanks man.

Yeah I understand 😃 I also had to work on low budget before but then I was able to flip my 240sx for some MAJOR profit meaning now I have a bigger budget on projects I do 😛 and yeah I agree with you, I thin the Alpine white will look sexy 😉

Added 1 second later:

# RotaryProblems :
Yeah have to work with a low budget 😛 And yes I'm thinking about Alpine White! Thanks man.

Yeah I understand 😃 I also had to work on low budget before but then I was able to flip my 240sx for some MAJOR profit meaning now I have a bigger budget on projects I do 😛 and yeah I agree with you, I thin the Alpine white will look sexy 😉

Added 12 minutes later:

So I paid a visit to a scrapyard today, cash in hand looking for a new project. Well, one thing lead to another and I ended up purchasing this EG6...

Yes, she does need ALOT of work but this is the type of project that I was looking for. There is some major rust on the car and as you can see she is missing some body panels. I called up a friends cousins scrapyard to ask if he has any bits and bobs for an eg6 and sure enough he did 😃

Luckily I managed to find everything I need from a single yellow eg6 which he had. Even better, he knew I was a good friend of his cousins so he gave me all the parts for a nice deal.

Next thing to do is to give her a nice paintjob, new rims, maybe some after market parts but most importantly... Fix in a Honda VTEC engine! ( Should get the engine for a good price as a friend tells me he has something ready for me 😉 )



   
Smurf
(@smurf_5633)
Reputable Member
Joined: 13 years ago
Posts: 322
 

SO here's a little update before heading out. The old rims are really growing on me but i can't stand them on the legacy so i picked up a set of CCW LM20's also got new plates for her, and went with DE in the front


They look way cleaner then i thought. I also got her dyno'd.

Before i start dropping money into the engine i'm gonna get a euro for a stance build, and as it turns out early 2000's Mercs are way cheaper then i thought so i'll be looking for one so i can put the gold rims to good use.



   
shiroq
(@shiroq_13099)
Active Member
Joined: 12 years ago
Posts: 16
 

It has been done!!! Took a few days but the evo now is done.

Here is a pic with the paint done. I liked how the car looked without the rear bumper but i sold it so unfortunately had to put the bumper back on.

Be careful of that RB26DET Evo cruisin in the streets

Goes 270 Km/h on the highway hopefully the new owner is careful with the 560hp engine and does not crash my work.

And now a little glimpse to my next project i bet no one can guess the outcome of this 😉



   
Page 334 / 541
Share: