Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
So, when my HDD got infected, I lost a ton of pics of the build on my Supra, but managed to save my SLR folder. Here's the rundown on what she has right now.
Shes totally fixed up right now, running and driving on her own, and shes got some Tein shocks and awesome Brembo brakes. Sitting on some whit steelies until my good wheels arrive, which those are a surprise. All the rust is gone and I got some nice Recaro seats. Need to source a rollcage that doesn't impede on the open roof too much. Shes making 550 hp to the rear wheels, and I think that's perfect for this kind of car and what I plan to do with it.
I want to be like the cool kids
I was testing the Supra , sh*t happens..
No. More. Supra. Never again.
Now I just have to build the AE86 (it's a Levin Kouki). Since turbo kits for the 4-AGE seem to be inexistent (Nitrous kits too! For the E36 I'll go with an RB26 swap. I've heard of issues with the availability of aftermarket parts for the inline-six M44 , and for the stock ones too for the S54.) , supecharging is the only route.
^ and this is why we take lessons on how to drive at the drag strip before taking our high horsepower cars to run the strip 😉
The AE86 is in good shape , but the 4AGE is going to be rebuilt anyway
New suspension setup : MrSir arms , blistein shocks/springs , Wilwood 275mm drilled discs , 15" HRE C106 wrapped in Goodyear 245/35 drag radials.
Bodykit test fitting (Vertex full bodykit + quarterpanels and hood , TRD trunk & mirrors , Seibon doors and the grill from a Zenki). Also it's got tinted windows and taillights.
New deep green paint!
So yesterday I stopped by Valo's used car dealership just for a quick browse, once I got to the pack I saw the perfect drift missile project and just had to pick it up! Only cost me $1000
An almost complete shell of a Silvia S13 with Recaro seat, and roll bar installed.
But It's also missing quite a bit, like the front windshield, rear right quarter panel, a headlight and tail light, no battery, obviously no engine, no suspension except for a broken brake disc and a blown out strut.
I have some pretty big plans for this, first step is to put a brand new running gear set up on along with some wheels, I have a spare set of wheels laying around along with a set of willwood discs and pads. Also plan on swapping the whole front end with a 240sx front end and pop ups (love them pop ups) I've got an engine in mind but I'm gonna make you guys wait and see on that one.
I'll update you guys when I get the suspension and wheels on
I got the supra back from the paint shop yesterday and i started working on it right away, the car got some 370mm 6 pot endless brakes all around and i changed to better tein coilovers that is for drifting.
this is how she look like right now🙂
I got the stickers on the S13 and I got a new car; I just couldn't refuse. I was cruising through Valo and came along a used car dealer which had a really nice BMW 320i (E36) CoupΓ©. Was only 1500$ and since I have a soft spot in my heart for the E36 I bought it. It has the rims of a 2004 Impreza and I think they look kinda good on it. I daily the BMW right now which is better in gas costs. I will complete the beetle and sell it.
My plans are:
-Complete the bug and auction it off
-Service the engine on the BMW (kinda needs it)
-Other rims on the skyline
Found out that the previous owner slapped on M3 bodyparts. Checked the VIN and it's not a genuine M3.
got a E36 316i for free, cause of high mileage, I'll pass my plans to daily my S13 and choose the 316i as it. Needs to be registered tho 😛
Looks like it's pretty common to see higher trim parts on lower trim cars. Yesterday I saw a 320i with 328i badges , and a "junkyard" M44 from a crashed X3. I'm still searching for an M3 or a 328is.
But , the Trueno has got a new engine! 4A-GE Black Top , HKS crankshaft & pistons (stock conrods , can't find other ones) , Toda intake cam , HKS exhaust cam , Toda header , catted exhaust & N1 muffler , 4A-GZE IM and supercharger , J-Performance intercooler kit & piping , APexi air filter , HKS cam belt & filter , Greddy oil filter , SC belt and oil cooler , radiator and piping from Koyorad. E85 kit , tuned , put down 290tq (395nm) @ 6250 and 448hp @ 7000.
Damn you work fast, NikiLauda.
So I have a couple updates.
-
S13.4 is running but now has emissions & noise issues, will get sorted and then will take it for a lap somewhere hopefully tonight or tomorrow.
-
Daily news, still slow but I've done some proper upgrades to it that make it more appealing to look at (in my opinion.)
Took photos in the exact same angles as my past photos
Spoiler:
The differences on the car are as listed
Imported and paint matched Euro trunk/boot,
Complete Accuair V2 E-level air suspension setup
16x8 Advan A3As
Westy front end conversion
Clear indicators & side markers
Anyone interested in a US trunk or the single circle front grille + lights?
and finally, something exciting has rolled it's way into my shop.
Okay so it's actually been in the back room for about a week now losing air and slowly corroding more and more. If you've been a part of the forums for a while, you may remember my 240Z which came to a tragic end. Not the fact that it was damaged and I sold it, but that someone bought the car, threw a trash V6 in it, and made it into a drag car. Ever since then I've regretted selling that car immensely, and I finally found a chassis that is in good enough condition to build on, but not clean enough that I'd feel bad doing anything stupid to it.
This will be a race car with inspiration from some of the classic Datsun race cars from the 70s. It will be naturally aspirated and will be inline, i'm just not sure what engine will be going in yet.
# Haku :
Spoiler:
And finally, something exciting has rolled it's way into my shop.Okay so it's actually been in the back room for about a week now losing air and slowly corroding more and more. If you've been a part of the forums for a while, you may remember my 240Z which came to a tragic end. Not the fact that it was damaged and I sold it, but that someone bought the car, threw a trash V6 in it, and made it into a drag car. Ever since then I've regretted selling that car immensely, and I finally found a chassis that is in good enough condition to build on, but not clean enough that I'd feel bad doing anything stupid to it.
This will be a race car with inspiration from some of the classic Datsun race cars from the 70s. It will be naturally aspirated and will be inline, i'm just not sure what engine will be going in yet.
Devil Z Question mark???
Hey Guys its been a couple of days and parts came in for both cars but the evo will show later 😉
So first of The Gs300 got new Paint 😃DDDD and she got some over fenders, brand new orgin bodykit, huge wing, Bride Seats, boso exhaust 😃
also any one know when the next drift event is? i need to go <3