VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
JdmSly
(@jdmsly_5934)
Honorable Member
Joined: 13 years ago
Posts: 693
 

@lajen could i join the team?



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

BAM! Back into the scene!



Whats up guys! I'm back, been away because I've been working hard on the Corolla! The thing in the crate was actually a Jun 3.2 stroked 2JZ-GE, and some fender flares. Apparently, Jun has heard of my hoonage (no clue how) and wants to sponsor me in a drifting competition, so they sent me their base engine. 269 hp, which is more then the engine I got with the car (131 hp) and the engine i bought earlier in the week (196 hp). They gave me exhaust, differential, driveshaft, transmission, everything. I picked up a set of RS Watanabes, because I've always loved how they look on these cars, and some overfenders. I chopped up my oe fenders, bolted these on, and added spacers to the wheels. She looks SEXY AF right now imho.



   
Ey_papa
(@ey_papa_11657)
Noble Member
Joined: 12 years ago
Posts: 1461
 

2 months later...
I sold the Civic and I import a DC5 Integra Type R from Japan.

It have a K20A Type R, Stock Suspension. The car is Stock.
Look like I will lower it 🙂



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

The Resurrection Part 1

I also found this, abandoned in the Valo Pick-A-Part, and surprisingly, no-one there knew how it got there, and no parts were missing. However, the turbo's are fucked, all the impellers are broke, the head gasket and the oil pan gasket are shot, the cam timing is way off, the belts are deteriorated and cracking to pieces, seal on the roof is basically rock now, not rubber, rear driver side shock and springs are collapsed, and the brake rotors are gone. like, rusted and pitted. All the parts are here though, and just need a little TLC. For now, I'm going to put one of my 4A-GE's into it, just to move it around while I rebuild the 2j. I picked her up for a staggering 2 grand, mostly because the people had something to put in the cars place. Unfortunately, it was another Supra, this one a hard top, and no turbo, but the body was straight(ish) with the rear bumper dented in a bit. Poor thing. Hope someone takes care of it.

Added 2 hours 13 minutes later:

I pulled the engine, and started to strip it down to the block

Here's whats left of the turbos

Pulled the intake and exhaust off

Pulled the cams, and the cam cover

Off with its head! Here you can see whats left of the gasket that protects the engine.

Tipped it over so I could remove the oil pan

Got the crank, conrods, and pistons out

Now, I have just a block. I sent it to be cleaned thoroughly, and I'm talking to JUN about some parts for my new tire shredder...



   
marcus915
(@marcus915_12126)
Noble Member
Joined: 12 years ago
Posts: 1166
 

@Tom, I have an SR20DET motor you can use from one of my old S-Chassis builds, my grey hatch that a friend totaled. I have the motor sitting on a stand in the corner of my shop if you want to swing by and pick it up. I'd say $2000 for the ready to run motor but I'll wiggle on the price a bit.



   
lajen
(@lajen_10297)
Eminent Member
Joined: 12 years ago
Posts: 45
 

@JdmSly: Sure you can join, i only wanna know one thing, what car are you using and is it a time attack build or drift? 🙂



   
zexeffect
(@zexeffect_4388)
Eminent Member
Joined: 14 years ago
Posts: 37
 

So got my first purchase

Its pretty rough all around. Every panel has a mark be it scratched, rust or just dirty grot.

The front right seems to be the worst though. I assume the subie has been through everything from rallying to straight up street races. Absolutely knackered. A look in the engine bay didnt make my day either.

The guy told me the original turbo was blown and he just fabricated an exhaust to fill up the space. Which really is embarrassing as this car has STI go fast bits all around when it clearly isnt a go fast car currently. Mind you, the highlight of all this mockery lies at the back.

As the deal came to a close, the lovely lady of my life turned up outside the garage and has already done mods of her own on the turd.

I would like to apologise in advance if anyone was insulted from both our cars in advance. Currently, Im looking for an exhaust shop to fix up the pipe under the subie as it clearly sounds blown. Probably a body shop as well as bodywork and paint arent really my thing. Any recommendations the good people of valo?



   
PyroWasBroughtBack
(@pyrowasbroughtback_16804)
Active Member
Joined: 11 years ago
Posts: 15
 

So while I was driving around in my Kolf the new daily, I found a M3 E36 on sale, the car looked pretty bad and the owner said it had been left on the driveway and the handbrake ended up breaking due to overuse in handbrake turns (trying to attract ladies I presume) so the car rolled into a pole freely. After a little chat the owner said that this M3 is not your usual M3 and boy it isn't. In the engine bay there is a LS3 N/A engine which produces 357HP and has 439Nm of torque. And on that moment I decided that I have to have this M3, so I bought it for 1500$ and here she is (image unavailable in archive)
(image unavailable in archive)
The car also has different colored parts which i'll end up painting black like the chassis, and I'll black out the headlights as well as the taillights, I might put the M3 spoiler on it but I'm not sure yet. I could use a engine experts help with the LS



   
lajen
(@lajen_10297)
Eminent Member
Joined: 12 years ago
Posts: 45
 

Just got a pic from my bro on his skyline after the race at spa.. the car look in really bad shape.. he hit the wall at his last lap so hard that the rim cracked but luckily he had a stock wheel left so he at least can move the car around.. the front bumper quarter panel and right skirt broke to..
That sucks.. now he can't go to the race at akina.. but hey the good thing is that he could walk away from the crash without any injuries that's always something🙂



   
NikiLauda
(@nikilauda_7307)
Trusted Member
Joined: 13 years ago
Posts: 83
 

My 1993 Cobra with chrome Bullits (19x11 & 19x13 / 245/35 & 295/35). Stock trans (T5) , rebuilt traction-lok (with 45% locking) , I've upgraded the engine a while ago (Spoiler: Trackheat upper & lower intakes , Trackheat heads , Comp Cams XE276HR cam , FRPP fuel rail , FRPP 42# injectors (later upgraded to Fast 60# ones) , BBK 75mm throttle body (later upgraded to an 80mm BBK one) , an aluminium timing chain & timing cover , and an Accel coil pack , and I've just mounted an Spoiler: headers , 67mm turbo , intercooler , wastegate and piping.

Turbo set at 6 psi , pump gas , just clocked a 10.24 @ 102.9 on the quarter mile.

Since 500hp is considered the "reliability limit" of a 302 stock block/shortblock (and my trans is also stock) , my engine is on borrowed time. I'm thinking about a stroker or a new shortblock , suggestions anyone ?
I'm also about to pick a new LX (it's an ex daily driver , stock) , they're more used in drag racing. I may also sell this Cobra , contact me if interested.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

# marcus915 :
@Tom, I have an SR20DET motor you can use from one of my old S-Chassis builds, my grey hatch that a friend totaled. I have the motor sitting on a stand in the corner of my shop if you want to swing by and pick it up. I'd say $2000 for the ready to run motor but I'll wiggle on the price a bit.

Transmission included? Sounds good anyways; I'll hop in my Transit and check it out. Can't miss that car, they aren't common here.

@zexeffect: Haruhi approved XD BTW Body-wise you can visit my old friend Greg. He does bodywork and is an airbrush and paint expert. His airbrush works are the best I've ever seen. You can find him at 544 Franklin street here in South Valo. Tell him that you know me and he'll probably give you a discount.

Tore out the CA18DET of the S13. If someone wants it, shoot me an offer!



   
Lamzumi
(@lamzumi_11136)
Eminent Member
Joined: 12 years ago
Posts: 35
 

# Tom Diablo :
Transmission included? Sounds good anyways; I'll hop in my Transit and check it out. Can't miss that car, they aren't common here.

@zexeffect: Haruhi approved XD BTW Body-wise you can visit my old friend Greg. He does bodywork and is an airbrush and paint expert. His airbrush works are the best I've ever seen. You can find him at 544 Franklin street here in South Valo. Tell him that you know me and he'll probably give you a discount.

Tore out the CA18DET of the S13. If someone wants it, shoot me an offer!
Image

Hey Tom, just saw your CA18DET and it looks in good nick, I'll take your engine off your hands, how does $750 sound?. I'm coming over seas for a while and I have a S13 build back here in the UK that I'm working on, much like yours in the picture. I'll sort out the transporting of the engine, don't worry. There's alot of paperwork I'll have to fill out beforehand though, all the regulations crap we go through for shipping, you know?

I hope this works for you and message me if the price is right, or you could always drop the offer more, haha.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

750$, you pick up the engine and you buy me a beer. I was about to say 800$ but since you like anime; I'll take 750. Remember to drive on the right side of the road here in the US XD



   
Lamzumi
(@lamzumi_11136)
Eminent Member
Joined: 12 years ago
Posts: 35
 

# Tom Diablo :
750$, you pick up the engine and you buy me a beer. I was about to say 800$ but since you like anime; I'll take 750. Remember to drive on the right side of the road here in the US XD

Sweet!, You're in luck!, I keep a couple of beers on me anyway lol. Ah, I do have a couple of occasions when I do forget to drive on the opposite side cough. But I'll try to remember this time. Anyways, should be coming over seas in a few days, so if you can, text me on this number.

Gives Number



   
zexeffect
(@zexeffect_4388)
Eminent Member
Joined: 14 years ago
Posts: 37
 

@Tom thanks for the tip! I'll hit up Greg soon enough. Any recommended shops for the blown exhaust btw? probably gonna change the tip as well cause it is dented



   
Page 322 / 541
Share: