Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
I bought a wrecked Miata when I hauled the remains of the Celica to the junkyard. It'll be a RX-7 mockup including a rotary engine. When I put the wreck on the trailer I also got the rotary and the front end of a RX-7 FD that got rolled over.
I already installed a suspension in it.
A widening kit and a fastback roof are ordered and coming from Japan. Meanwhile I will install the engine.
I'm loving the tuning scene here at Ebisu. I've gotten TONS of offers for the Corolla, but I want to tour it around my home town of Valo. I've gotten alot of offers in the 27k range.
$3,000 Chassis and Body
$6,000 Engine and parts
$2,000 Suspension and wheels
$1,000 Paint
$3,000 Extra parts (Upgraded radio and computer with race counter, oil cooler, Steering wheel, Racing seat, Roll cage, and Nitrous)
Total $14,000
If I accepted an offer I would gain a $13,000 profit... That's enough to get a new project car, but I want to hold on to it a bit longer. That car has been a journey! From trailer racer to AWESOME :RICE: Racer! If anyone wants to test drive it, just let me know. Its got about 770 HP twin turbo and 150 shot of nitro. The Advan tires are so sticky, the custom made computer was saying I was pulling 1.3 g's out around the Ebisu course. I got here early enough I got the track to myself for about 15 min, and I got a few laps in. The acceleration is mind-bending. 60 to 120 on the back straight came in literally 1.2 seconds and the accel pulled me back 1 whole g. Then, braking, for the hairpins, it was pulling 1.7 g's and from what the officials cameras said, the discs were glowing bright red. Pulling out of the first hairpin, and going into the second, I pulled the handbrake, and floored it for one second, and broke the rear end loose, and just held it at a respectable 30 degrees, and rotated into the third hairpin. Screaming out of there, foot down, turbos spooling up, I came up on the triple kinked part (I was on the Minami course) and slid around those, twisting and turning to line up for the next turn. The Corolla is starting to grow on me. I may even custom fab hood to fit over the MASSIVE engine and turbos and just make it into my daily...
So, it's been a long time. Sort of. I managed to change front end to Jetta's/Vento's. Got the whole car painted & some other smaller stuff done, but now it's going just for a very low car soon... because I bought a E46!
Oh hey dxg, sorry I didn't came down to Ebisu. You may see me cruising around the Shutokou C1, if you want to meet me.
Okay, so today the 2JZ and the Exhaust pipe arrived. Since I live in Japan, I couldn't come by.
Engine fits like a glove! I also got some running gear on the car.
The exhaust pipe looks amazing on the Jetta! Thank you Tom Diablo for the exhaust pipe AND the engine!
So I got some suspension and brakes and wheels, and I lowered the car and gave it some negative camber. Am I doing it right?
And then I got the body panels. And added a big ass spoiler, because drift car.
Added 5 minutes later:
Temporary drift car, not permanent.
Sure man, I'll chase you down in the Toyota xD
This is going to be fun. In fact, I'm already there, come find me if you can!
FINALLY! Here are pictures of my new ride! It is a BMW E46 M3 (EURO), almost stock with a 2.2l I6 engine. I got it for 4k$ from father's co-worker. It had already a bit tuned engine (new manifold, filters and belts), some interior add-ons, new front seats, VStanced coilovers & modified struts! The seller also gave yellow foglights & a lip. Here are some pictures when I got that nice (not so nice actually) beast.
Now I've edited few things on this machine, got used Fikse's from JK Shop with very thin tires. Added lip & changed foglights to yellow. Few years ago I had bought carbon BMW badge just for fun, thought it would be cool even I didn't car at that time, but now I slammed that on my hood.
Plans I'm going to have are more blackness to the car, burnouts & stronger engine!
# Facepalm :
This is going to be fun. In fact, I'm already there, come find me if you can!
Check your rearview man!
Oh SHIZ! A wild Corolla appeared!
Spoiler:
# Bigg Boss93 :
Got this piece of trash of a bmw 3 series(CSL) from Joe's used dealership junkyard, paid it 450β¬.
While waiting it to be delivered i started ordering new parts such as VStanced Garage suspension arms, Koni Maximum Adjustability shocks and springs, Lexus LFA brakes(front and rear)...
.. and some cool wheels, Enkei RS05RR on front and SSR Gartmaier on back, both running on Bridgestone Potenza RE002 tyres.
I spent just 839β¬ for rims and 820β¬ for tyres.My guys at NRT workshop gifted me a set of handmade double pipes, i provided to cut and weld the stock pipe to remove the cat and center filter.
It sounds amazing now!Also got a used passenger seat and a brand new Recaro black alcantara Pole Position seat, only for true connoisseurs. 😉
I also made a custom rollbar for it.I had a brand new Energizzler battery in my garage, i bought it for another project but never got to finish it so here it is, installed in my new project.
Car - 450β¬
Suspensions - 2156β¬
Shock absorbers - 4188β¬
Springs - 1088β¬
Brakes - 4366β¬
Rims - 839β¬
Tyres - 820β¬
Exhaust pipe - 80β¬
Muffler - Free
Rollbar - 350β¬
Battery - 110β¬
Driver seat - 1563β¬
Passenger seat - 259β¬Total - 16269β¬
Sold FL Suspension, Shock, Spring, Brake, Rim and stock muffler for 320β¬
Total - 15949β¬
Had to do some cut and weld for the rear suspension and shock mounts so to fit the ΓΌber wide rear wheels.
Here you can see L done and R not.And the fitment done.
Sold stock bumper, lights(head and tail), side grills, L door for 575β¬
Total - 15374β¬
Bought and tuned a 2jz for 12000β¬
Total - 27374β¬
Stay tuned, more stuff to come. 😃
| Car | 450β¬
| Suspensions | 2156β¬
| Shock absorbers | 4188β¬
| Springs | 1088β¬
| Brakes | 4366β¬
| Rims | 839β¬
| Tyres | 820β¬
| Exhaust pipe | 80β¬
| Muffler | Free
| Rollbar | 350β¬
| Battery | 110β¬
| Driver seat | 1563β¬
| Passenger seat | 259β¬
| Engine + tuning | 12000β¬
| *Doors | 1482β¬
| *Carbon roof | 470β¬
| *Trunk | 798β¬
| *Trunk straps | 25β¬
| *R bumper | 513β¬
| *Wing + R diffuser | 384β¬
| *Lights | 3192β¬
| *Carbon side grill | 1426β¬
| *GTR hood | 1689β¬
| *Hood carbon profiles | 354β¬
| *Hood clips | 25β¬
| *Sideskirts | 416β¬
| *Sideskirts | 416β¬
| *Mirrors | 570β¬
| Total | 28813β¬
| Sold parts | 895β¬
| Total | 27918β¬
* = New
Once the mechanical work was done i bought a bunch of brand new parts from bmw.. these guys are nuts, their parts costs a friggin lot! x.x
The parts i bought directly from them are: trunk, R bumper(shaved by myself), lights(tinted with a 5β¬ spray can 😃 ), GTR hood and sideskirts.
I also ordered some custom parts such as Carbon side grilles and hood profiles, Carbon roof(had to cut the old one to fit this, quite a messy job but looks good and weights about 50kg less now), Trunk straps and Hood clips.
My friend Phantom, from Phantom's Drift Tech Inc. sent me a Carbon wing and R diffuser he made for a show, basically they are brand new with few fingerprints, nothing a bit of polish cant fix. 😃
Time to choose a color for this biatch.
Crap i just noticed i need two new mirrors, ordered them from BWM, they want 570β¬ for them... focers!
I'm already at 125! Speedo's maxxed out xD Digi says 130 lol
Craaaaap! Hold on, I'll try to take a photo! BTW, I'm doing around at 132. Turns out this kid had tricked the engine a little.
Hey, pull over and we can check each others cars out!
Added 1 minute later:
Should I have put my hood back on? LOL
Okay, I'll pull over! And no, the car without the hood is just fine!
Bigg Boss If you want I got a M3 CSL Engine with a G-Power Intake Manifold, Kompressor and Turbo For sale
If you want it it's 2500$