Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Major updates on the S13- I finally got around to throwing away the stupid stock T25 and replacing it with an S14 T28. I'm now running 12psi safely and the car pulls pretty damn nice. I also picked up a Greddy front mount and piping kit, new wheels, rear camber plates and those bolt on fenders. The wheels are Nismo LMGT1s with a re-lip that brings out the offset quite a bit. They're 18x10 all around with a 30mm offset,bringing them flush to the fenders without even using spacers. I definitely needed the bolt on fenders at the rear because I had to chop some of my OEM fender off to fit the wheels. The added camber kit also helps dial in the fitment quite a bit. My exhaust has also been re-located a bit to fit the rear bumper and I think it's safe to say that the build has been going perfectly. About the BRZ, I haven't done anything to it since my last post here because it's more or less complete but I still love driving it around. I also ran into the owner of my old GS300 and he's done quite some work to it. Check out the pictures-

Greddy Front mount and nasty offset wheels.

Bolt on fenders and a relocated exhaust.

A shot of the GS300. Similar to when I had it,but quite different.

Throwback to when I owned it.
I have decide to buy a Silvia S13
Iy have a SR20DET Pushing around 200 bhp
# Tom Diablo :
I own Predator Tuning Garage together with DXG and it's not that bad. It's enough to build projects, tho.@Scooby: I am interested in the 370Z convertible but minus the rims; Will you sell the car without the rims (discount if so?)? Do you still have the original ones?
We can do that, and yeah i have the original ones, i used them as winter rims.Come at me place and you can pick it up for 27 000$,Its a fair price, since the wheels are 3k and the tyres are in good condition.If anyone is interested in the Roti BLQ you can have them with the tyres for 4000$.
Wonderful! I'll hop in my Transit, attach the car trailer and I'll be over in a few minutes. (Need a link to the mod; The one here at VS is down)
Bought this scrap supra for 800β¬, it has greddy turbos(one with broken bearing) and coilovers already.
I'm thinking to keep those bwm wheels till i'm done fixing it.
Who the fuck put BMW wheels on a Supra?
The previous owner maybe? He was going to restore it and didnt want to ruin the stock wheels in the paint booth, then he sold both stock wheels and car, separately.. ._.
Anyways; went to VStanced Garage, the guys are amazing, they shaved everything already...
..and are waiting me to check their catalog and tell them what i wanna do with it.. it'll be a difficult task 😃
edit: they sold all the stock parts i didnt need for 850β¬ and are now checking my engine, it'll be the first part we'll restore
Nice Build Bigg Boss, If you need any help for a Set of wheels, I could give you a set for your supra 🙂
I have 3 set (I will uploads pics later).
Well i just spent 8612β¬ just for engine parts and lights
Engine parts list:
exedy clutch
single top mount exhaust manifold
full trd catless exhaust system
restored the good one of the two old turbos(greddy t88h38gk)
greddy intake pipe and filter
full hks turbo piping and intercooler
hks intake and exhaust camshafts
hks cambelt
trd cylinder head cover
dry sump
Its current output is of 442hp without fine tuning, i will also replace the oil filter and add a oil cooler later, they(VS garage guys) suggested me to keep a normal oil filter for a week so to clean the whole system(it's a new filter and i also got new oil).
Added 35 seconds later:
# Ey papa :
Nice Build Bigg Boss, If you need any help for a Set of wheels, I could give you a set for your supra 🙂
I have 3 set (I will uploads pics later).
Thanks, show me so i'll be able to tell you if i'm interested or not
Set Number 1 are: CCW LM20, in 18 inches
Set Number 2 are: Volk TE-37, in 18 inches
Set Number 3 are: SSR SP1 non deep at the front and Deep Dish at the Rear, in 18 inches
What's the bolt pattern and offset on the CCW wheels? I just may snag those.
5x114.3, all three set have the same bolt pattern
Yeah I'm going to sell my Mark II and figured I'd offer here first. If anyone's interested, (Someone who has the mod, I'm not going to PM you the link.) then I'll give it to you $10000 as it is right now, with the 1000HP 2JZ and everything. I have half of that into the engine alone but I have too many projects and I'm going to try and step back.
The Integra sold a little while ago, and if I can get the MX5 out of my hair then I think I'd be happier (and richer).
# Ey papa :
Set Number 1 are: CCW LM20, in 18 inches
Set Number 2 are: Volk TE-37, in 18 inches
Set Number 3 are: SSR SP1 non deep at the front and Deep Dish at the Rear, in 18 inches
Not my cup of tea really, thanks anyways.