VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
2jzCookie
(@2jzcookie_11127)
Estimable Member
Joined: 12 years ago
Posts: 244
 

Started tackling some bodywork the last couple of days. There were rust in several areas and still are. I mainly focused on the rear lights since that bothered me the most. I had to go apeshit with the grinder at some areas but luckily most of it was surfacerust. So I cut and welded in the new metal and then applied some bondo to fill out the bumps and make it flat and somewhat nice again. Wont be nice until I spray some paint over it which most likely wont happen in the near future. As I've said before this was meant as sort of a missile/driftslut so I dont feel the need to do that ATM.

Enough talking here is some before and after pics!

Spoiler:

Spoiler:

I also removed the speedhunters logo, nothing against them but I didnt fit IMO, and instead threw on a hoonigan sticker.

I went through the car and discoverd that all four shocks are leaking which sucks. Gives me an excuse to get rid of them aswell as the lowering springs. About the springs, one of previous owners only installed lowering springs in the front for some reason. This leaves me with gay rideheight in the front and even more gay in the rear... cant wait to sort that out!

As far as the engine goes I am constantly on Valolist and Ubay(Cheesy AF I know) looking for parts. I bought an alternator aswell as a starter from one guy who claims they are in working condition. That's all he said. He seemed to be a nice guy and he told me I'd get my money back if they dont work. Ultimately I would like to find a donor engine for a reasonably good price and swap parts from it but my main objective is to make the current engine run!



   
tomaukz
(@tomaukz_10764)
Reputable Member
Joined: 12 years ago
Posts: 263
 

So i picked up a Suburban. Yeah. A suburban.
But not just any Suburban, oh no. A Surbaban.........Without an engine!!!

And it came with a free toilet so i couldnt resist the $400 offer

I stripped the rear and front bumper, possibly going to keep those depending on how the truck pans out in the end. I stripped the paint and found out the original color of the main body was a light greenish-blue color, kinda want to repaint it that color now 😃.

So does anyone have a V8 i can throw in this thing that i can build off of. Im kinda leaning towards making it a gasser or drag truck of some variant, cant go wrong with that 🙂



   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 

@ 2jzCookie : You're giving me very compelling reasons to finish that Foxbody convertible version I started making a long time ago. 😛

But, since I'm going to re-make the Foxbody at some point anyway (in full LOD0 quality but with all the same parts), I guess I'll just plan to have a convertible variant with that.



   
gt3076r
(@gt3076r_7071)
Noble Member
Joined: 13 years ago
Posts: 1070
 

Well, I know I said that I didn't really intend on modifying the S13 but I couldn't resist buying more stuff. I picked up a "New" FRP custom made bodykit for my S13. I got it for a sweet deal- $400USD and a BOV that I had no use for. Yesterday I mounted everything up just to see how it looked and I was amazed..too bad it won't actually remain on the car until I get a re-paint. Check it out-


Looks funny without a big IC up front.


New exhaust setup needed.


Not a scratch.



   
Pinter
(@pinter_14768)
Reputable Member
Joined: 12 years ago
Posts: 326
 

Got some more news on the FC3S!

I installed a body kit...(RICE)
Got the car lowered
And new shocks.

The body kit came in grey

Engine bay shot



   
2jzCookie
(@2jzcookie_11127)
Estimable Member
Joined: 12 years ago
Posts: 244
 

# Harrison15 :
@ 2jzCookie : You're giving me very compelling reasons to finish that Foxbody convertible version I started making a long time ago. 😛

But, since I'm going to re-make the Foxbody at some point anyway (in full LOD0 quality but with all the same parts), I guess I'll just plan to have a convertible variant with that.

Cant wait to see that then!



   
Driftphantom
(@driftphantom_6153)
Honorable Member
Joined: 13 years ago
Posts: 650
 

Hey guys its been awhile im sorry I was dealing with AP exams and graduation in like a week. A lot of progress has happened on the s13:

1) the engine is in! sr20det blacktop. came modified from japan. improved intercooler and external BOV. stock tune still.

2) Interior is near complete. The gauges for oil pressure, boost and oil temperature I got on sale from Import Image racing. all AEM products. The recaro ordered ended up never getting here, so after a hearty refund U got these Brides at a discounted rate because they are "defective" just some stitching flaws but nothing major. hydro brake is from Enjuku Racing. and finally, the wheel is a quick release from Driftworks. its basically a Nardi with their name on it.

Annnd that's it for now. I have a bolt in roll cage on the way and some kouki 180sx taillights shipping from japan. plus I am going to the local pull apart to see if I can find some of my missing panels. if anyone has a deal on the missing exterior pieces let me know maybe we can work something out



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

Quick update/ introduction to my new build. Don't really feel like doing a big write up like I usually do so I'm just going to cover the basics in case anyone actually is interested.

Few weeks ago my new car arrived at my shop from the docks.

The story for obtaining this car isn't as simple as me going online and buying it. I actually know a guy living in Japan currently who works in importing and exporting cars over there. He's my go to guy on parts and halfcuts. I was talking to him one night about parting out the 240SX, probably a couple months back. He said no, don't do that, sell it to me I know plenty of guys over here who would love a 240SX. He asked around and found a buyer for me but things got delayed for a little while and so a month ago I asked whether I should part out the S13 or buy a new car. The answer was solved for me when a guy over in Japan said that he'd trade me the 240SX for this JZX100 Mark II he had. It was formerly a drift car and it used to have stock a 1JZGE that he put some money into. He blew that engine and took it out, then the car just sat in his shop for about 2 years. He sent me a couple pictures and I told him we had a deal. It took just over 2 weeks for this car to get to me, but that was 2 weeks ago. Since then I've put in some work.

First thing's first.

2JZ goes in. This is the 2JZ from the S13, so already this car is making 800 on low boost, easy.

The wiring and mounting didn't take too long, I just needed to go find a couple parts from the 2JZ version of this car to get the engine where and how it needed to be. The exhaust system was then done and fitted with a nice 3" tip on the back for loud 2JZ noises.

The car came with some great suspension work already done to it. The inside was already rocking a hydro handbrake too.

The next thing to come is appearance. I'll just skip right to the final product.

Once again I looked to Japan as it's near impossible to come across parts for this car here in Valo.

First I ordered areo/body parts in the form of someone who had these custom never used wide fenders and overfenders for the car. He also threw in this front bumper that he no longer was using. I actually don't know what brand this is, at first I thought it was Origin Labs but it's not. Anyone know?

I immediately went to my friends at Work Wheels for the amazing 18x10 all around VSXX's and Kumho for some of my favourite tires that I've used on almost all of my cars.

After I got all my parts to my door step and then fitted, I dropped the car on it's ass and did an alignment. I still needed 55mm spacers in the front to get the wheels up with the fender, as well as 35mm in the rear.

This car is nowhere near complete. It still needs lots of work, including paint and fine tuning. More to come when I have the time.



   
gt3076r
(@gt3076r_7071)
Noble Member
Joined: 13 years ago
Posts: 1070
 

# Driftphantom :

Looks great aside from the floating steering wheel.



   
Driftphantom
(@driftphantom_6153)
Honorable Member
Joined: 13 years ago
Posts: 650
 

# shaforostov :
Looks great aside from the floating steering wheel.

yeahhh I noticed it last minute. "quick release" lol



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

@Haku: Does your guy in Japan expoort engines and rims? I'm looking for a 4A-GE Blacktop or Silvertop and 16" Watanabe rims



   
dxg1997
(@dxg1997_10641)
Noble Member
Joined: 12 years ago
Posts: 1445
 

You know Nissan has those "Zero Gravity" seats in the new Altimas? He has an anti grav steering wheel! Much quicker response times because no steering column xDDD



   
2jzCookie
(@2jzcookie_11127)
Estimable Member
Joined: 12 years ago
Posts: 244
 

# dxg1997 :
You know Nissan has those "Zero Gravity" seats in the new Altimas? He has an anti grav steering wheel! Much quicker response times because no steering column xDDD

Comes with a bluetooth connection to the steeringrack!



   
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

# Tom Diablo :
@Haku: Does your guy in Japan expoort engines and rims? I'm looking for a 4A-GE Blacktop or Silvertop and 16" Watanabe rims

I just asked him for you, he said there's a Blacktop already in their Valo shop. It's called "JDM Union" in Southern Valo. 89 Leaf street. The engine's going for $1500 just tell them Henry sent you and you'll get it for $1200. It's stock with a RWD 5 Speed.



   
Tom_Diablo
(@tom_diablo_7482)
Honorable Member
Joined: 13 years ago
Posts: 685
 

# Haku :
I just asked him for you, he said there's a Blacktop already in their Valo shop. It's called "JDM Union" in Southern Valo. 89 Leaf street. The engine's going for $1500 just tell them Henry sent you and you'll get it for $1200. It's stock with a RWD 5 Speed.

Thanks! I'll hop in my Transit and check it out. I'll also check if they have the wiring + ECU as well.



   
Page 267 / 541
Share: