VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

SLRR Roleplay Car b...
 
Notifications
Clear all

[Closed] SLRR Roleplay Car builds

8,114 Posts
215 Users
0 Reactions
4.9 M Views
JDMgoatleg
(@jdmgoatleg_10289)
Estimable Member
Joined: 12 years ago
Posts: 135
 

Alright sweet!



   
JdmSly
(@jdmsly_5934)
Honorable Member
Joined: 13 years ago
Posts: 693
 

if you guys still need a hand i can pop over 😃 whats your address? plus i wanna take the spoon for a spin



   
JDMgoatleg
(@jdmgoatleg_10289)
Estimable Member
Joined: 12 years ago
Posts: 135
 

I live around the south side of Valo you'll see the garage right away. Theres going to be an r33 sitting in the lot along with a 190e Mercedes with hre's and a blue evo 9.



   
Ey_papa
(@ey_papa_11657)
Noble Member
Joined: 12 years ago
Posts: 1461
 

2 Weeks Later...
Well I did A change on my 240sx; Bought a New Engine, Wheels and a Front Bumper...

For the Engine, I won't tell anything, you will need to guess



   
Pinter
(@pinter_14768)
Reputable Member
Joined: 12 years ago
Posts: 326
 

# JdmSly :
Well hey i need an engine for this got any rbs or 2j's layin around? and i got welding 😃

I've got an 2jz laying around from my brothers Supra. BTW that supra got smashed in the rear...



   
CALLmeSCOOBY
(@callmescooby_14433)
Reputable Member
Joined: 12 years ago
Posts: 359
 

E28 UPDATE

Today we got the engine out, its in decent condition.If any one is interested in a 3.6 straight 6cyl. hit me up.I got into contact with a guy outside Valo with a S52 engine.Will go get it latter today.We finished fixing some minor body work, car needs to be sanded and painted, but i will do that after the engine is inside.Engine bay is made full black matt, and the shiny S52 will be awesome looking inside, but before it goes inside we need to check its condition.Just a few pics from today.



   
Ey_papa
(@ey_papa_11657)
Noble Member
Joined: 12 years ago
Posts: 1461
 

Well, I have Decide what color My 240sx will Be

My 240sx isn't paint yet, but I went to the Shop and he show me a Preview of what It could look like



   
Driftphantom
(@driftphantom_6153)
Honorable Member
Joined: 13 years ago
Posts: 650
 

Got a new pipe for the ep3. this is a HKS Highpower catback exhaust. I was gonna jump on the Spoon Sports full system, but it is back ordered for another 6 months!



   
Kornis
(@kornis_7951)
Honorable Member
Joined: 13 years ago
Posts: 548
 

Didn't get as much done over the last week or so due to other more important stuff popping up that needed to be dealt with. The S14 got a new front grill which I think looks nicer than the stock one and tinted indicators. As well as that I also ordered a few stickers for it. I am also planning to go for the Kouki front end once I'm back from my holiday.



   
Pinter
(@pinter_14768)
Reputable Member
Joined: 12 years ago
Posts: 326
 

How did you get HQ stickers!?



   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 

I've sold the G8 a long time ago, to pay for the build of the R33 and for parts for the Supra. I'm pretty happy with the two cars I have now, although each is a little too extreme for a daily driver.

The two cars in my garage currently, that are "mine" (as opposed to being previously mine and then sold):

The Skyline is incredibly rough to daily drive, in addition to being inconvenient because it's RHD. It turns the most heads, obviously - which is a good thing and a bad thing, since I don't exactly want people thinking I want to race them all the time; and it's red, and a Skyline, so police pay more attention to it. Consequently, it doesn't get a lot of mileage except on track days. Ultimately, it's built to be a highway battle and one-mile top speed machine, but I don't want to actually use it that way out of fear of wrecking it.

Picking up and building the Supra was a wise idea. Rather than organizing a lot of the work myself, I had a shop handle a lot of it, and the result that came back is a much more usable street car that's just as much fun to drive as the R33, just less of a "prima donna".

Specs on each:
Nissan Skyline GT-R V-Spec (BCNR33)
Spoiler: - 1996 / Series 2 car.

  • One of the few Motorex imported cars - federally legal, and with as solid provenance as you can get with these kinds of things.
  • Was originally Sonic Silver (KP4); has been repainted Nismo Red (AR1)
  • Completely stripped down inside and rebuilt, to remove any rust spots or potential problem areas, and to add chassis bracing.
  • Right hand drive. It's more authentic that way; and besides, I don't want to cheap out on a conversion with a Maxima dash or some crap like that.
  • Front and rear bumpers are Nismo. Lip is a no-name brand; I'm going to replace it with a Nismo one eventually. Sideskirts are Top Secret; eventually these will be Nismo 400R items as well. Fender flares are by Abflug, with some modifications to make them go on cleaner.
  • Tarzan G-Box to improve AWD response. I can also put the car in full RWD mode, but it becomes too much of a handful if I do, so I usually don't.
  • Full R34 rear subframe, and lots of modernized suspension all around.
  • Endless 6-piston brakes with vented rotors.
  • Volk TE37s in 19" with Advan Neova tires.
  • (Car should have a bolt-in 6-point cage with a removable rear cross bar, but I haven't modeled it yet. Pretend it's in there.)
    GT-R Engine
    2817cc displacement. 11.4:1 compression.
    10,000 RPM rev limiter. I regularly wind it up to 9000 or above when driving hard.
    RB26 N1 block. I would like to have started with a Super GT "RRR" block, but I don't know how I could have gotten one.
    Nismo 87.0 over-bore
    Brian Crower "RB29" 79.0mm stroker crank and connecting rods
    CP Pistons
    JUN Auto full cylinder head
    Unknown spec HKS camshafts, probably discontinued. I would have installed V-Cam, but it was too expensive when I built the engine and would have added a layer of complication I didn't need.

At 4.5bar boost setting and most aggressive tune:
1055BHP @ 5250RPM. (For reference, that's 900 all-wheel horsepower.)
832 ft-lbs of torque @ 5250RPM

At 1.5bar boost setting and a specifically restrictive tune:
581BHP @ 9000RPM. (I don't know why it takes it that long to make power under these conditions.)
322 ft-lbs of torque @ 5500RPM

R34 Getrag gearbox with reinforced gears. Super tall 2.7 final drive ratio, because again, Wangan car.
Theoretically, this car can reach 220MPH. I'll probably never know. All I know is that I've nearly gotten in trouble a few times because I couldn't convert from KM/H on the dashboard to MPH in my head quickly enough, and the car gets to really high speeds at an absolutely scary rate at full power.

Toyota Supra Turbo (JZA80)
Spoiler: - 1997 USDM car. Bought from a single owner.

  • Was originally coated in a very faded coat of Alpine Silver Metallic. I had it repainted a shade of Lexus pearl white.
  • Abflug front bumper / Bomex skirts / Blitz rear bumper / TRD rear spoiler.
  • The Abflug front bumper is temporary while I get the kinks sorted out with a JUN replica bumper.
  • Brembo 6-piston brakes with drilled rotors.
  • BBS LM 18" wheels with Bridgestone Potenza tires.
    Supra Engine
    3430cc displacement. 10.0:1 compression.
    Apex'i 88mm over-bore kit
    Brian Crower 94mm stroker crankshaft and connecting rods
    JUN Auto / Cosworth high compression pistons
    JUN Auto complete cylinder head
    Brian Crower Race camshafts with GReddy cam gears
    Twin Garrett GT45 turbos
    At 5.0 bar boost and most aggressive map:
    867BHP @ 4250RPM
    914 ft-lbs torque @ 3750RPM

    At 1.0 bar boost and "street" setup map for pump gas:
    668BHP @ 5250RPM
    547 ft-lbs torque @ 4500RPM

    Stock V161 transmission and gears, 3.2 final drive rear end for higher top speed.

As I said, I sold the G8 to pay for the build and running costs of the R33, and to obtain the Supra. The owner happened to absolutely love everything that I had done with it, and didn't do much of anything to it except maintenance. He loaned it to me for the photo shoot. All I know is, I'll miss it.

Pontiac G8 (VE)
Spoiler: - 2008 Pontiac G8 Sedan. Yes, the V6 version. I bought a G8 V6 because prices on GT's and GXP's were too high, and I was planning on swapping the motor and doing other body work anyway. It was originally Liquid Red, and stayed that color the whole time.

  • GXP front bumper with faux carbon grille
  • GXP rear diffuser
  • JHP Senator style rear lip, with Commodore SS wing attached on top of it
  • V6 / base model door handles. I didn't like the chrome handles on the G8 GT / GXP anyway.
  • LS7 engine swap, mated to an Australian-imported Commodore SS manual transmission. I made sure everything was done as cleanly as possible.
  • Borla exhaust.
  • Never figured out exactly how much power it made, but it made about 500HP to the wheels. That was good enough for me.
  • The guy borrowed the "HOT ROD" plate from one of his old cars, to put onto the G8.

Full image set here.



   
JdmSly
(@jdmsly_5934)
Honorable Member
Joined: 13 years ago
Posts: 693
 

@harrison15 Keep us updated on those builds man! you do a great job at rp-ing 😃



   
Coprone
(@coprone_9681)
Noble Member
Joined: 13 years ago
Posts: 1288
 

@Harrison, you add more info on your cars than people do in real life haha! Waiting for building updates

So, here's a update of my garage again. My best friend Daniel wanted to try out drifting. Since my S13 & S14 are in too good condition for drift beginner, I bought another 240SX S13. Why did I bought it not him? Because he doesn't have licenses & has nothing to do with it & I needed a beater missile anyway.
About the beater itself, it moves forward (& backward) thanks to CA18DET. All mods on the engine is a small intercooler & spark plugs. Rear springs & shocks should be KSport drifting package & front is unknown. Front arms are modded & have bigger steering lock. Rear diff is welded too. I'm still laughing at the muffler as it's been hit to fit on the car lol.
Exterior, well, it's ok. Front fenders are literally killed & I have a feeling that a new bumper is installed after collision that harmed the quarterpanels. Chassis has some rust when you look under the car (actually rust doesn't disappear when you are not looking under the car, sadly). Color is in good shape, no big scratches either dents (except my lovely front quarterpanels) & is actually really white. For fun I installed [HOONIGAN] & FLEWCREW stickers on taillight. Wheels are in good shape, I'm impressed that I got these for that small price.



   
RedCarDriver
(@redcardriver_1155)
Member Moderator
Joined: 15 years ago
Posts: 1125
 

@ Coprone: Thanks! Everyone here has been doing really nice work. I love your screenshots, as well as the ones Kornis posted above.



   
2jzCookie
(@2jzcookie_11127)
Estimable Member
Joined: 12 years ago
Posts: 244
 

Sry for the long gap between updates. I have a break now so hopefully I cant be more consistant!

Anyways here is the car!


This is how it looked when it was at stock height(monstertruck height) and no fitment whatsoever. Completely stock suspension components and no spacers. Got bored of it pretty quickly so decided to swap.


New Setup:
H&R Ultra Low coilovers
Modified steering knuckles
Aftermarket sway bars

Bunch of other goodies

As soon as my coilovers arrived from Germany I began stripping out the stock suspension components. From there it was fairly straight forwards, out with the old and in with the new.

After one sleepless night and one grumpy gf(used the impact wrench countless times at 3 am in the night) it was in. I still have work to do to get it just right but that is the beauty of fully adjustable suspension components. Can always be changed!

Enough talk here is the car in its current state.



Fairly happy with the height. As I go along it will go up and down depending on what rims I have and personal preference. The rims are 19' concave Volk TE37's, only temporary as I'm borrowing them from a friend until I figure out what rims I want. That is also why I wont bother with the fitment just yet. Im possibly thinking about picking up a set of Euroline DH rims for it but not completely sold yet since they cost a fortune xD Let me know if you got a good suggestion. Anything is welcome!

Next on the to do list is power upgrades! Will go over that in the next update but I can give you a hint and say that I'm waiting on parts to get delivered. May or may not be turbo-related, you will see!



   
Page 207 / 541
Share: