Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
# A Dumbass :
So I went to the BMW Dealer for some body panels for the M3, And I was suprised... When I say the VIN of the M3, they told me: Did you know that your BMW M3 is actually a BMW M3 CSL?
Why do you need the VIN to buy car parts for your car? :I
K, I cancelled the body kit order, and decided to do something a little different to the GT-86...
# David_2709 :
Why do you need the VIN to buy car parts for your car? :I
Well since Forever, I use VIN for parts cuz I will have the good parts I need
# A Dumbass :
... a S54 From a CSL (IDK How they still had one).
Was it the dealer at Thompson alley? I sold the S54 CSL engine I had lying around to them
# Tom Diablo :
Was it the dealer at Thompson alley? I sold the S54 CSL engine I had lying around to them
Yes it is.
XD That was the engine from my drag-wagon. It ran damn good and worked well in the wagon. Just wasn't powerful enough for the drag purose. (In fact the game starts lagging a bit when the engine is visible and it can't be turbocharged)
It's Ok, I will keep it NA
Added 1 hour 7 minutes later:
So Guys, yesterday I sent the M3 To get Paint, And I recieve the New Suspension Kit and New wheels
Damn, I'm impressed with what I did
Hey People!
I've had shitloads of work to do the last couple weeks so the volvo 242 has been put in a corner in my shop and doing no good. However, i've done some major work to it with help from friends. For example cutting out metal that was to rusty and replaced it. Unfortunately I had to get new front fenders for it aswell as a new hood. They were way to rusty to even consider recovering so I went to my local junkyard and was lucky enough to find a 242 similar to mine. It had no engine however the chassis and overall car looked to be in decent condition so I scavanged some parts from it. Im considering buying it to have as a parts car but that will come later down the road. Want to focus on getting the car done 🙂

Oh, I got a trunkdoor for it aswell. This was also taken from the 242 at the junkyard. It has been debadged which doesnt bother me at all. I would probably end up doing that too. After all im not doing a restoration here so whatever floats my boat will be done.
I relocated the battery to the trunk for more room. I also gave the enginebay a nice wash once the old blown engine was out. That was quickly done, I just removed the components bolted to the firewall and other components throughout the enginebay and that was it.
Now for the engine I picked up!

When I was at the junkyard looking for parts for the car I stumbled across a 1990 Mustang Foxbody. It was in sad shape, it seemed like the car was rearended at some point which sucks since the rest of the car looked good. I could see aftermarket parts all over it. It had aftermarket suspension, seats and a bunch of stuff. Most importantly it had an engine. Looked completely stock other than the intake being custom-made.
Anyways, I talked to the owner of the junkyard and it turned out the engine was running when the car arrived however it had been parked at the yard for a long time. I ended up picking up the engine without knowing that it ran. So when I got home I immidiately started working on it. I managed to turn it over so my fear of the engine being clogged up was gone. Now I started to see hope!

After many days of blood, sweat and tears me and my friends got the engine in the car and got the car running. However it wasnt that easy. We obviously had to fabricate new engine mounts aswell as hammering out the transmission-tunnel. I forgot to mention that I got the driveshaft and rearaxle from the Foxbody aswell. The driveshaft had to be shortened to fit the 242 but eventually we got it. I also went ahead and welded the diff and degreased most of the driveline components. After that they got painted with high-temperature spraypaint.
Here are a small list of things that will be done:
-New suspension components and brakes
-Rims and tires( Let me know if you got any 16 inch rims laying around that ur willing to sell)
-Headlights and tailights
-Bumpers front and rear
-Windows
Thats all for now. Next time you see the car it will hopefully be lowered. That is if my parts are delivered in time 🙂
Last night I got to work on the KE70 because I had some spare time.
We spent quite a few hours sanding down the existing paint work, getting it all down to bare metal. Then we did a coat of primer and started working on some dents and imperfections on the body.
We got it hoisted up after the primer dried and we took off the wheels.
The running gear was in very bad condition, though it didn't really look like it. 3 of 4 wheel hubs were seized and brake lines were all broken. We bled the brakes and then disassembled the whole system up to the hubs. We started working on them and got them back into working order, cleaned them up and then installed a set of coilovers. replacement brakes were laying around and so we installed them, then put on a new set of steelies just to get the car rolling around.
Engine bay was nice and empty except the car had it's original battery, which was stuck and corroded. We removed it, then got to work priming the bay.
New battery fitted, the car got put back onto the ground.
Last bit of work tonight was putting on these fenders. They aren't exactly meant for this car but we made them fit. They aren't actually installed right now, they're held on with double sided tape for the time being. We'll get them fixed onto the body once paint time comes.
I don't really know what direction I'm heading in with this car. I can go my usual, ratty and ridiculous way, or I can go show car standard with it.
I have body panels ordered, some of them should be here sooner than others. We will see what gets here first and then start fitting them. Also saw a kijiji ad for some KE70 seats.
While browsing the interwebs I stumble upon a 1984 Toyota Supra Celica in need of loving care. And for just β¬1000. Interested, I called the owner and set up a meet.
When I arrived I had a good look at the car. First thing I noticed was the massive dent on the side of the car. Should be fixable...
The paint on it has definetly seen better days. I'll have to respray it, maybe to some more interesting colour.
But overall the car looks good. Don't know if it runs as it's got a flat tire and apparently hasn't moved in years.
After a bit of talking I managed to get the price down to β¬850 and stike a deal. Now I'm just getting this bad boy on my Transit's trailer and taking it to my garage.
^ Nice chassis you got there Haku. I say go Show car with it. And for the love of God keep it away from Puertoricans unles you want to sell it because most of them are crazy for those cars. Trust me I know...
(They also can fit a rotary engine to almost anything but thats a topic for some other time)
# zerito :
^ Nice chassis you got there Haku. I say go Show car with it. And for the love of God keep it away from Puertoricans unles you want to sell it because most of them are crazy for those cars. Trust me I know...(They also can fit a rotary engine to almost anything but thats a topic for some other time)
🙂) 🙂) 🙂) I was actually looking at 13Bs online before I found the engine I'm going to be putting it 🙂)
Also thanks for the heads up 🙂)
So I took the Toyota into the workshop to start working on it.
First thing I wanted fixed is that annoying dent. So I sanded down the paint around it to bare metal. After hours of working with various tools and trying to get it straightened up I finally did, and it looks so much better.
Next up I went and dismounted all of the bumpers and sideskirts as I've ordered a new bodykit I think will fit the car much better, which should be coming some time next week. In the mean time I'm going to be selling these parts as they're in good nic and could be used for another project.
As I'm changing the rims anyways, four of these beauts are also up for sale. If anybody's interested just send me a message.
Tommorow I shall be sorting out the suspension and underside of the car, maybe get it ready for a nice coat of fresh paint.
Hey Guys, I found a E34 Shell, It's not in good condition, the whole front frame is broken, but it was 50$.
I will try to make A new engine bay and repair the Frame.
And with The Money I made with the Mods on the E46, I will Import me a Toyota Chaser (Only a Frame) and maybe a S13 (Maybe?)
I was driving the Sierra and well
I "tapped" there. Around that pole you see. Street drifting is a bad idea.