Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
I didn't put in a claim, i actually bailed because i wasn't about to play a reckless/careless driving ticket, so i got it home, put the lot of parts on craigslist, and dumped the car.
I just bought my new car, i'll post pictures when she get's home.
I also got a bigger shop.
UPDATE
Surprise! An ER34, with a worn 2JZGE, some HR coilovers, Mines replica wheels, a rust free chassis, and a pretty clean interior.
Prepare for more....racecar things..maybe a RB swap if i feel like it.
Have had a 240SX frame lying around, so decided to build it up into a street car with some power. Got the single turbo 2J swap in, put a set of CST Hiper1 Zeros on the car and took it to the track to shred. Maaad fun.
(btw i play in windowed mode, so excuse the extra crap around the pic)

The engine is in now:
It has stock internals exept the pistons, TRD camshafts, a bigger intake manifold, a twin fuel system, a TRD twin disk clutch and a bigger Turbonetics turbocharger. It did start but it will need some fine tuning to get it right.
Thought I'd show you guys some of the cars of my colleagues at work.

This is what the car park usually looks like.

This 2008 Pontiac G8 GT belongs to a guy I work with. Apart from the tint, the car got no performance modification on it, but I think it looks pretty good.

This 1993 Volvo 850 GLT got some nice wheels and lowering kit on it. I dunno who own it.

Don't be fooled by the slotted mags! This Mustang actually is a 4-cylinder! A turbo 4-Cylinder, but a 4-cylinder none the less.

This car got the same 2.3 Turbo as the Mustang, it's the 1989 Merkur XR4Ti, one of the last to arrive in the US. It looks rusty and kinda beat up, but the owner boosted the engine up to 200hp, he goes to autocrosses with me, a cool guy!

This is the head of the lab's car. 1995 Ferrari F355. And unlike other Ferraris out there, this one actually got driven a lot!

And the best car here. 1966 Porsche 911 Targa. A very mint car! I haven't met the owner though, it first appears very recently and I don't know which department he work with. I haven't manage to run into the guy yet, I waited today for half an hour at my car just so maybe he'd come back to the car, but I had to come home so I couldn't meet him. 🙁
Oh and also you may notice I drove the Golf to work today, that's because the 328 decided to not run properly, it lose a lot of power and feels like it's running on less than ideal amount of cylinders. Somebody suggested that it's the VANOS O-ring, I guess I'll take a look in the weekend. This month doesn't seem to be a good month for me when it comes to car related things.
I recently got a AE86 Tureno Kouki that was sold on an auction, because it was illegally parked for a very long time with no way to contact the owner.
The problem is that it was stolen from my garage because I parked it outside, instead of inside for some reason. Luckily, the car was traced back and saved from being thrown into a valley. However, the robbers ripped it's 4AGE out, probably to sell it. I had no option but to take it back to my garage.
This is the car, after it got stolen.

I didn't knew what to do with it, but then my neighbor decided to sell his RX-7's mostly stock 13B-REW just in time. I bought it from him, and decided to use it in my AE86.
This is the result.

I went to an auction to look for a supra but then a beauty rolled in the Nissan Skyline R34 V-Spec and it was an all out bidding war then I won the bid at $9000 which isn't bad but as I drove it home I felt a massive power lag I got home and checked it out asap and yup yhere it was 9k for a replica it had an Volkswagen 2E 8valve 2.0l motor wich has about 25hp I was upset but I had an intrest in drifting so I began to strip the interior and the motor and I game a homeless guy 20bucks to take it off my hands then I searched for an RB26 but really 500hp which wasn't bad for a drift car so I went for the best Japanese motor ever built the 2JZ-GTE wich can achieve more the 700hp stock now I just need to find one anyone got a 3.0l supra motor for sale turbo or non turbo with supra exhaust plz post below for deals I am also looking for some sick bodykits and rims
Added 3 minutes later:
# marcus915 :
Have had a 240SX frame lying around, so decided to build it up into a street car with some power. Got the single turbo 2J swap in, put a set of CST Hiper1 Zeros on the car and took it to the track to shred. Maaad fun.
(btw i play in windowed mode, so excuse the extra crap around the pic)
if Vstanced had alike button I would spam your post with it I love 2JZ's
I've done it!!! I completed what I set out to do! Got the engine swapped over, front fenders, hood, and mirrors, however, had to get doors from a Holden UTE, and primed everything new. Now It's ready for paint! I now have a one of a kind Pontiac G8 Ute! So happy!!
@camarofan dude what a great find! id be more than willing to assist with the rb tuning if needed I know that it is one big headache alone.
3.2L S14: the head came in today. what we have here is a 2jz head matched with Greddy cams being spun by a Greddy belt. Still waiting on the Greddy turbo kit but got the engine and all my support mods fitted to the car. this included a Greddy oil filter, Greddy transmission fluid cooler (bulletproof 2jz transmission) and an ARC radiator and hoses. the turbo kit ordered comes with turbo header, the single turbo, and upgraded phylum, intercooler with piping, and finally an oil cooler. I Cant wait (:
Pics:
Well, i was got my Z tune fenders, and a new trunk, which had a small lip on it, i put on an Impulse bumper i had, and got a Dmax hood for the ER34 When i was waiting for my hood to get delivered i got my rebuilt 2JZGTE, which sounds AMAZING.
I later decided i wanted the BN kit, so i order that along with the Uras wing.
And since the car was set up for mad skids....that's what i did.
And the moment i pulled out of the pits
Ended up just taking it off, and finish the day and put it back on
Aaaand......i killed motor, had a couple buddies help me gettin' it out, and turns out that it was just the seals, and the turbo. We got it put back together, and loaded it on a trailer to go home
Got rid of most exterior parts to make a way for new bodykits, and got a intercooler as well. If anybody has a suggestion about what bodykit to install, please tell me the name of it.

So i got this s14 zenki in my hands... i had it for over 3 years... all it needs is put all the fenders bumpers.lights glas etc and put on the catback 😛
SPEC:
Chassie. full rollcage welded approved for pro modified drifting europe. Not D1
Front:
New WISEFAB Front suspension. adj. camber, toe, caster, tesion rods
New Front Ksport Circuit fully adjustible coilovers
New Tein 7" springs
New Brembo 355mm Carbon fiber brakediscs
New Brembo 6POT calipers
New 18x10 Rota rims
New copper brakelines with racefluid
New Nangkang AS1 tyres
New d1 spec brake pads
Rear:
New full WISEFAB rear suspension. adj. camber, toe, caster
New Rear Ksport Drift approved coilovers. fully adjustible
New Tein 7" springs
New Wilwood 275mm brakediscs
New wilwood 4POT calipers
New 18x10 Rota rims
Worn out Nangkang AS1 tyres
New copper brakelines with racefluid
New D1 spec brakepads
OEM: Welded diff.. Kaaz 2 way coms on the side
Interior:
New Nardi mocha steering wheel (offset)
New Snap off
New Autometer Gaugues,boost.oil temp. oil press. lambda. water temp........
New Bride seats. Red
New Optima yellow top battery.
New Fuel cell.
Sterio:
-_-
Exterior:
OEM
New Rocket bunny ducktail
New homemade overfenders. unpainted
No rear bumper
Engine:
Standard block
New VEMS control system
New Ajden header.
New Greedy T78 turbo
New Tial Wastegate
New Tial 50mm BOV. plugged. just for the sound 😃
New 1200cc injectors
New BEE*R launch control
New Torque downpipe
New Torque frontpipe
New Torue Decat
New 3" Japspeed shotgun catback
Custom intercooler pipeing
3.2L s14: Today the full greddy turbo system arrived. When installed, the engine now can produce 910hp, just 10 more than the expected result of the build. it runs like a dream and only took about 3 test before I got it all dialed in. Took it out to the track to she how she handles now awaiting body kit and paint
Pics:
Well, I decided to hold off on updating till I finished my Miata. So here it is.
I redid the interior in black, because tan is terrible. I picked up some Rotiform rims and wide fenders for it too.
Here's the back, I got some fastback style taillights, and a nice exhaust tip from J's Racing.
And the engine, which has full BLACKSERIES tuning.
The G8's rebuilt engine should come in tomorrow, So I can mount that and then make some nice long, black lines on the pavement.
I got some stock seats and finally some glass! Not in my ass but on my car 🙂)
In the front are BMW M brakes and calipers which were a bitch to fit but they're in and they work perfectly. I wanted to stick with the 5-spoke style so I installed a set of 19" Enkei Tarmac EVO rims. THe bodykit isn't here yet; It's a Kaminari kit with a Do-Luck wing. Installed some headlights, too. I got them for dirt cheap because the pop-up mechanism is toast. So I have them open all the time.
Hey people!, I've just opened up my workshop once again this year ready for the builds I'm starting, hopefully ending with a good Race/Drift car. Whatever I can work the car up to.
First, I'd like to say I'll be uploading my builds later on, since I've ordered a new chassis and hopefully it'll be here within the next few days. But meanwhile, I'd like to share the build I did last year (Sorry, no shots during the build, only the finished product).
This is my Toyota Altezza, or as the name of the car here in the UK is a Lexus IS300. So mine is pretty rare with this company name.
This car doesn't have the usual Toyota engine though. I've adjusted it slightly so fit in a RB26DETT from a Nissan Silvia S13 K's. It gives the car that much power as so the car lifts up on two wheels when taking corners, of course it takes some skill to stop it from rolling over, as so I've widened the wheels to sit further away from the car.
The car is also rolling on 18" BBS wheels all around and the stopping power is all on the four Carbon disks and Brembo calipers.
Now, this is all I can show you for now, lets move onto the chassis I'm expecting.
Unlike most people I've seen here, I'm not buying from a scrap yard, instead I've got a contact who specializes in refurbished chassis. Though it is more expensive this way, you can guarantee a rust free frame.
Now whats this car I've ordered you ask?, well I've searched around and a Toyota Corolla AE86 Levin is very, very rare in the UK.
So I'll be excited to have this come in and will be a pleasure finding parts for this car.
Edit:
Well, I didn't expect this to happen. Just as I finished typing this and went for a brew, this came in on a flatbed truck.
Looks good doesn't it?. Well now I've just used a spare box of HKS coilovers and some Mr.Sir suspension arms. Then put on some Carbon disks and black Brembo calipers (You know, for the stealth approach.)
Next I used some refurbished AE86 wheels I bought just last week for this build.
Only thing now is, for the engine, is to find a 4A-GE engine to complete the car. Then onto the body. I've chosen to take the sleeper look. Because who doesn't like the standard look, but which a hidden killer under the bonnet?