Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
FINALLY I got the new wheels and tires for the s14 zenki. These look familiar? that's because ive had these beore, I bought back my forgiato wheels I sold with 300zx to that teen. Considered it a happy 18th birthday present to myself 😃
The rb26 cylinder head came in today as well, but I sent it off to Forged Performance in Georgia to get modified to fit the rb30. I am still unsure if I want to go NA or a small turbo
I've been away for awhile. Had some problems with like paying off debts with the S14 I built. So I had to sell my cars, was so depressing. I've had a stable job for awhile and I bought a 98 supra body and have been slowly building it since. It had all the body panels but they weren't installed on the car. Anyway here's where its at so far.
Planning on drag racing it legally when its finished.
So far, Titan Motorsport built and tuned engine (with a slightly smaller turbo so I'll be able to drive it almost daily) HKS Hipermax drag shocks and springs all the way around
15" 5x5 Weld Wlumastar wrapped in Firestone Drag 500 tires upfront and 15" 5x13 Weld Alumastars wrapped in Firestone Bias Ply's in rear
Needs paint and maybe a 200-300 shot of nos.
I will be bringing this to any car meets in the area, hope to see you guys sometime.
Sorry if this is too long or confusing, still kinda new at this.
-->one month later<--
Big update today! The C10 is freshly painted in wine red, has the LS3 installed + side exhaust! The stock exhaust pipes were so rotten that I couldn't use them anymore. So I fitted a side exhaust. 😃 It just needs registration and besides that it's a sick truck with 360hp.
@TheUnhandyCivic: I wanted to bring this truck and the Cuda (which will be on a trailer) to a car meet not far from my garage. Looking forward to see your Supra!
Tom Diablo :Spoiler: #
You going to keep that front end or do something different? Personally always loved the quad headlight C10s 😃
Update
So I will start with good news and make my way to bad news. The good news is that earlier today I got a lot of work done. New interior bits came for the S13 and so I gutted it.
Then installed a set of Recaros and a new Nardi wheel.
Over the last few days I've been doing electrical work, learning how to rewire and fix things in the S13. I had the battery relocated to the trunk and then fixed the wiring for my signals, as well as my in car lights and the lights on the cluster were wired strangely. Also fixed wiring harnesses that connect to the 2J.
Less issues now, so I moved onto the GC8 because new engine 😃
Gutted engine bay
and twin turbo EJ25 with plenty of custom bits
I took it out for a drive to break in the engine, all was going well too.
Then... well...
I can't really explain what happened, but one minute I was driving about 80 KM/h and the next I rolled the car once before landing back on the wheels. I guess I hit something, but I didn't see anything and the car isn't incredibly low. Regardless, I'm okay and lucky enough to be, but my luck with cars seems to be the opposite because the whole steering rack is mangled as well as most of the car's body.
Shit happens, unfortunate that it was right when I thought it was complete.
# Haku :
Happy birthday dude 😃 😃
Thanks Man it was Sunday! Also sorry about the impreza, is it salvageable?
Another Big Day for the s14.
Here is what goodies shes got today:
1989 Nissan Cefrio RWD Transmission and driveshaft
Titan Stage 4 Cylinder Head (port and polish by Forged Performance)
HKS Stage 3 Camshafts
Greddy Stage 3 Intake manifold (street legal, not that it matters)
Deatschwerks 10mm fuel rail
Deatschwerks 850cc fuel injectors
Aeromotive 850 Fuel Pump (single)
I stuffed that bad boy in there just few minutes ago. its snug, but has just enough room for a turbo system. That is on order now. after that, It is time for the dyno and then the track 🙂
# Driftphantom :
Thanks Man it was Sunday! Also sorry about the impreza, is it salvageable?
Ah, close enough 😉 and not too sure, trying to assess the damages and see if it's worth the money to repair vs what it would be to just leave it alone, maybe sell it, part it, whatever. Frame didn't twist (I don't think), but steering linkages are non existent now. Engine looks to be fine as of right now (thankfully as that is the biggest investment) but I have all these dents in the body panels where I hit rocks or something, like on the top of the door. My driver side window shattered as well. I'll take a closer look the the structural integrity of the car and see if the actually still is straight. We shall see.
# Haku :
You going to keep that front end or do something different? Personally always loved the quad headlight C10s 😃
I'll leave it like that; It's a sleeper so why shouldn't it look like one, too? 😃 Maybe I'll get a GMC grille for it but I doubt that.
Sorry to hear that your Impreza is wrecked.
I'll save up some cash and then I'll look for my own Impreza; I might contact you for parts, Haku.
Here's the look of my R34 now with new brakes & rims. I'll start boostin' da engine when I'm done with other cars.
It'll be my daily as a new project car rolled in... Chevy's Silverado from 1993. I bought it from my friend who bought that as a project, but failed lawl.
XD Looks like the '93 Silverado/Sierra trucks are spreading around here
I've saved money for three months and my fingers are itching. I went to the junkyard and I had an incredible find:
Sad, isn't it? It has no engine, no seats, no bumpers, no windows, no nothing. BUT It's a LEGIT 22b; One of only 424 made. Found it out after I got it home and checked the VIN. I highly doubt to find a EJ22 engine that was installed originally but I'll see what I can dig up.
Hi Guys! Sorry for my bad english. This car in crazy russian tuning. For this car, I paid 1200$.
Spoiler: SPEC:
-VAZ 2108'93 stock
-VAZ21083 (I4 block, 1.5Liters, carburetor fuel sistem, 69 hp)
-runing gear: stock shocks, spring is cut
-interior stock
"TUNING": Muffler "Prosport" +65 noise. Stickers "Π½ΠΎΠΠΠ°Π½ΠΎ" and "Drive2" +15 speed. Very big tachometer and radiator grill "Made in China".
The first problem after buy, on the way to the garage at this scrap boiled engine. I had to call a tow truck (+200$).
car in the garage and go to work!
Spoiler: LIST OF CHANGES
STAGE1: dismantling car and repair.
STAGE2: engine.
STAGE3: bodyworks.
STAGE4: interior.
STAGE5: testdrive.
STAGE1
To be continued...
I like the effort put in that post 🙂
Coprone, You mean my post? Thanks! The greatest effort to write in English. 🙂
# Coprone :
Here's the look of my R34 now with new brakes & rims. I'll start boostin' da engine when I'm done with other cars.
Sick looking R34 man. Is it N/A?Because GTRs never came N/A lol.
I got the Supra back home and stripped all the damaged parts and to be honest it's a mess.. the whole front end got damaged or bend, sideskirts got damaged.
the trunk is damaged but it still closes and fits alright, doors are fine too. i switched the front left wheel for an old steelie i had laying around but i did not start working on it yet because i made up my mind and i'm selling the car. it's just to much work for me to do, i know you guys can help me but the chassis is bend and i'm sure it won't run the way it used to do. it's on the classifield page. now i'm gonna search for something new but idk what.