Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Alright i made up my mind about the Galant. Im not going to buy it instead im looking for someone who is selling an e30 bmw, beat up or not I'm in need of a car right now. Im looking at around 2000-5000 for one w/ a clean title and little rust. Hit me up if you got one. K Thx Bye
# Harrison15 :
Anyone have any ideas on what I should get next? I'm looking for something I can use as a slightly more accessible daily than either one of the R33s. The GTR used to be my daily, but it's a little too wild to handle now (and it rips through gasoline); and the drift car is, well, a drift car.I've got an RB30 bottom end with a Nitto 3.2 stroker kit I bought while putting an R32 together with a friend; I got an offer I couldn't refuse on the shell, so I'm parting ways with the engine. It'll be $1100, since the block and pistons are used and I don't want to sell the crank / conrods separately. You want it?
Hey man that would be great ill come by and get it whenever you are available! and for a daily, what about a 180sx or a silvia? Nissan fun with less pistons
I've removed that wooden bed and de-rusted + painted the frame underneath. I already found a guy with a mint fleetside; The stepside offers not enough space imo.
# Driftphantom :
Hey man that would be great ill come by and get it whenever you are available! and for a daily, what about a 180sx or a silvia? Nissan fun with less pistons
Alright, cool, it'll be around! Let me know how the build goes.
Also, if I got a Silvia, it would probably give me a similar "problem" as the GTR after a short while, because I'd probably eventually feel the urge to throw an RB25 into it or something! I'm going to stick with something I could keep mostly stock.
Hello People!

I finally got some stuff done to the e36. It's been repainted but knowing me it wont stay this nice for long. I got a bunch of drift events that I wanna go to and I go hard at the track. Walltaps all day!

These are pictures I took before I went to my shop and took the engine out and delivered it to dxg1997. Sorry about the long wait but I had stuff to attend to. It has come a long way from what it was but there is still plenty left. Still need an engine for it 😉

I installed coilovers all around and got it lowered. I could go lower but it's not a showcar, more of a driftmissile. I am picking up a wisefab lock kit next week for it. I mean, the lock it has at the moment aint bad but would love more!
The rims are SSR Meshes wrapped in 215/20/16 stretched Michelin Pilots. I got a good deal on them from a guy with a similar e36 like me and they are almost new aswell. Not for long though. As soon as I get an engine it it those tires will be gone.
Now it's off to the shop to install some goodies!

sneakpeek
1 Month Later~
So since the last update much happened.I moved to a new place with my wife and kid, basicly other part of the town.The plus is that i got now a new fully usable garage with all the good stuff (no more outdoor freezing :woot: ).Well the work on the Cressy was paused for 2 weeks cause of the snow, we had it here ower a half meter, so it was imposible to work.In the time the parts from Japan arived (grill, lights & trunk).We mounted the grill and the trunk and we sent the car to the painter.Snaped some pictures before they picked it up, and then when it came back from the painter.
here you can see the color better
Yesterday we mounted all the stuff that waited for the car to be painted.Btw. i sold the steelies, a guy came by and picked them up for 700β¬ with tyres.The car waits now for the seats to be renewed, and i still need to pick the the rims.What would you guys sugest?I want them 16" or 17".Write me some ideas for the rims.It would help tie the rims to a few.Here are some pictures how it looks now (dont mind the messy garage 😃 ).
Update on the S13, I vinyl wrapped the car.
After that I went and took the car for a drift day with a friend of mine.
Got those reverse entrys on lock 🙂)
Close up of that crazy lock up front.
But of course my bad luck started to kick in and the engine started to flutter. Stopped driving before the problem got worse and that was it for the S13 today. But my friend let me have a go in his SC400.
Very fun car to drive, though much heavier than my S13 so I had to throw it around the corners. It's running a crate LS1 because the stock 1UZ was too bad to keep. Purpose built drift missle, no extras inside.
Anyway, got some work to do on the 2JZ. In other news, my TT EJ25 arrived and conversion will start soon. That STI EJ25 is for sale if anyone wants it, it runs very well but it's not something I want to build upon. I'd rather sell it to someone else. Shoot me an offer if interested, it has only 62000 KM on it. (62113 to be exact)
More to come.
Man @Haku you go through those 2j's fast haha. what's wrong with her this time? Also I picked up Harrison15's rb30 block. I shipped it off to be cleaned up and touched up just incase but that thing was immaculate. Great job keeping it up man, I ended up exchanging the crank and pistons for new ones that will arrive when the engine gets back just because I know I am gonna pound on these and I wanted to have them fresh.
Fuel line problems, all sorted now, but I wasn't getting any fuel to the engine. Came loose from the G's maybe, not really sure. Also I've been having some electrical problems, going to have to get those sorted out when I redo the interior. I've got a lot of maintenance to do on it 🙂)
Well, with a back order on my coilovers, i just asked for a return. I got the bumper and it put it on. I wanted to get the VR, but it was gone before i had the chance. I didn't want a V8, or a 2j. I ended up selling the car. I sold the Mustang without the 302, so it's back in the S14. The Apache ended up being too much work, so i parted it out, sold what i could, and trashed what i couldn't, which wasn't much..mainly the tubing.
Picked up the bed and installed it. I used my friends F-250 and my car trailer to get it here. That thing is as mint as a 1966 truck bed can get. Even the planks on the floor are new!
I've also ordered a LS3 crate motor. The stock one is seized up solid and I won't bother rebuilding it.
Update on my e36: I picked up a rb26 block. I wanted to do something different so instead of going with a s54, an rb will do it. I still apreciate those of you who were willing to sell yours( you know who you are 😉 )

Im making custom engine mounts since the stock ones obviously don't work. I will also reinforce the front, well the chassis overall so it can handle the drifting i'll be doing. I'm not going for crazy power or anything but it should help improving the handling of the car.
What goes for the engine I will be receiving parts in a couple weeks. In fact an extra engine. Not complete though. I still need an exhaust manifold, a turbo, a camshaft belt and a bunch of things. I also need to redo the wiring to work with the rb. Shouldn't be to hard 🙂
Dude nice choice with the rb26! I cant wait to see that 3 series on track. hopefully I can tandem with ya!
Just picked up an e30 for 4k and shes really really clean just a little rust on the hood and e39 wheels!
Added 6 minutes later:
I spent all night sanding the hood and stripping paint. Finally got the hood smooth and rattle canned it black, I also Tinted the lights red and taped 'em up.
I'm feeling it hbu guys?
That e30 looks promising!
went to work on getting the car ready for its rb30. I welded new motor mounts to the chassis because the 2jz mounts just wont work.
I got the rb30 back from the machine shop today. the block came back all nice and clean and ready for goodies.
List off Goodies installed today:
HKS Stage 4 Crankshaft
HKS Stage 4 Titanium Connecting Rods
Titan Stage 4 Piston Heads
(not shown in pics)
Chrome-moly Stage 2 Flywheel
Giken Cluth assembly
What I Ordered Today:
Rb26 Cylinder head
Nissan Cefiro 6-speed Transmission (rwd)
It is slowly coming together and I love it!