Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
hey guys i have been working on my s14 for about 2 months and i dont have many build pics but here are some (lol quick build)
when i got it
new engine for it
rest of the body and twin turbo kit
i ended up changing fronts
It's 2 weeks later now and I've lowered the Cuda so it sits at 7.50". Whoever had the car installed a stock suspension which is way too soft. It now has a GReddy Type S suspension.
A few days later...
So we had some trouble, as always when building a car, but we menaged to get the engine inside and runing.I went for a 2JZGTE, with alot of aftermarket parts, we even could take her for a run around the block.She runs good, need to dyno her and fine tune her later when she will be complited.
Its snowing rlly hard this days so i cant continue the build until the snow settles up.
Cheers
@CALLmeSCOOBY that Cressi is coming along really good!
Well there has been some major changes to the e36. One of which is it's no longer in that disgusting old beige/dirty white paint. In fact it's not in any colour unless primer and some bogger is considered paint :troll:

(I would use Coprone's ENB but I have issues with it. It's blurry for some reason.)
Here we have it. With some help from friends we stripped the car and started sanding it down. There were ofc some dents in the body of the car. Seems kinda logical since the car has been drifted the last few weeks 😃 The car was almost 100% rustfree. Other than minimal rust in the wheelarches and some rust in the frame it's free from it allthough the frame rust needs to be taken care of. Dont want anything snappin in half while im out skid racin...
@Ey Papa Do you still have that S54b32 engine for sale? If so i'll come over with some cash and buy it. Might need some help getting it to my place. I blew a headgasket in the Silverado and i'm pretty sure it wouldn't fit in my volvo 855. If it would it would kill my suspension and I would love to have atleast one running car 🙂
# 2jzCookie :
@Ey Papa Do you still have that S54b32 engine for sale? If so i'll come over with some cash and buy it. Might need some help getting it to my place. I blew a headgasket in the Silverado and i'm pretty sure it wouldn't fit in my volvo 855. If it would it would kill my suspension and I would love to have atleast one running car 🙂
Yes I still have it
So I'm up north right now visiting some friends, and I decided to bring the S13 😃 😃
Before I left, though, I did a single turbo swap for the 2JZ.
Old manifold and set up out
New single turbo set up in
Then I decided that the break in process would be me driving up to my friends place. It's about a 7 hour drive north. I started mid day but as it got darker, less and less people were around. Decided to find some back roads and have a little fun... 😃
and then posing before starting on the remaining 45 minutes of the trip 🙂)
I think she's looking pretty with the front end conversion. Needs some paint but I know how that goes 🙂) I'll have to repaint it anyway so I think I'll leave her for a little while, or until I get too annoyed by the mis matching panels and decide to do something. Stay tuned for progress, may come back and drift these roads again, just will have to try not to get caught 😉
# 2jzCookie :
@Ey Papa Do you still have that S54b32 engine for sale?
XD I have one, too; It's the CSL version
I'm checking out some air intakes and try to fit a twin carb setup into the shaker hole of the Cuda hood
-->one week later<--
I went to a place that could be called a giant flea market for classic US car parts. There were parts for Novas, Challenger+Charger, Barracuda, Fury, Mustang... you name it!
I got a complete 6-Pack for my 383...
...and some other goodies. Now the Cuda is done! My grandpa loves it XD
Next up will be my Neon. I sold the BMW dragster for a pretty penny so I got enough money for building up the Neon.
# Tom Diablo :
XD I have one, too; It's the CSL versionHow much are you asking for it?
# 2jzCookie :
How much are you asking for it?
Since the engine is sitting around wasting precious space and I am a nice guy, you can have it for just 1200 bucks. I can bring it over with my Sierra.
Thinking about getting a truck. Any recommendations? I'm thinking either S10 from the 90's (Sierra or Silverado) C20, or C30 even. Kinda like those old duallies 🙂)
Been researching but I figure some of you guys know? Also maybe a dodge but I haven't really found much out there that I want. (Because mods are limited 🙂) )
I'm currently using a 1993 GMC Sierra and it's holding up quite well. Got it for cheap because of the high mileage. It's a bit rusty, too. Been to Phoenix, AZ with that thing. Maybe if you give me a good offer I might sell you my Sierra since I am looking for a 1966 C10 to restore.
OR you can get a 1980s GMC Vandura /Chevy Van. They offer plenty of space and should be cheap to get.
# Tom Diablo :
I'm currently using a 1993 GMC Sierra and it's holding up quite well. Got it for cheap because of the high mileage. It's a bit rusty, too. Been to Phoenix, AZ with that thing. Maybe if you give me a good offer I might sell you my Sierra since I am looking for a 1966 C10 to restore.
OR you can get a 1980s GMC Vandura /Chevy Van. They offer plenty of space and should be cheap to get.
As much as I'd love to take it off your hands, I'm also leaning more towards like an 87.
Show me some pics, I'm interested regardless 😛
Alright! Might be stock but it has potential
Bed is still in good shape
It's yours for 600$
# Tom Diablo :
It's yours for 600$
For $600 I won't refuse at all. I'll come pick it up as soon as you're ready to let it go.
Also what engine is it running?
Thanks 😃
Perfect! You can come over right now. It's 322 Pelmont drive, southern Valo. I'll park my yellow Neon ACR outside so you can see where you need to go.
It has it's stock 5.4L. (Hauler's V8 from the STAGE1_2011) (Sent you the PM)