Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Markiche Krais (I dunno did I type it correctly.) And MK is on my uncle plates and he lives in the same place that I mentioned in my RP. I said that the location is in Dortmund cause there are ppl from all around the globe and they probably dont know where Plettenberg xD
Haha! nice builds!
Sup guys. Long time no update from me cause I am still in Montenegro on work.
Well here is a little update :
My cousn found me a buyer in Japan for my 3 cars : Supra, SilEighty and 240SX.
I got an offer for all 3 cars V$30 000 and I accepted it. The cars have bean loaded to the ship this morning and are on the way to Japan.
The R32 was not sold cause it was not on sale and will never be. I am left whit it at the moment but I will keep my eyes on the web if a deal appears I will take it. I am hunting down a rare beast!!!!
Good bye my babies :
SilEighty
240SX
Supra
When I bought the HCR32 I made a deal whit Harrison from VS Garage for a RB26DETT engine since I bought a rolling chassis only, they tunned the engine to 550HP but due to human error (me not checking the engin e mounts and inspecting the whole car) the engine was destroyed due to vibration. Now few weeks ago I got a new engine and now afther I sold my 3 cars I have enough money to tune the engine.
When I first took my 240sx afther the resturation a while ago I met a Skyline GTR R34 Driver and RB26 Tunner, called him and sent my engine via cargo plane to Japan last night and it arrived this afthernoon to me again. They cleaned the block and increased the cylinders capacity.
The engine is now a HKS RB30DETT packing as they said more then 1000hp, but I will need to check it out. HKS Crank,Con-Rods,Pistons,Cylinder head, Camshafts are made and tunned by them. HKS Twins on the Exhaust manifold are installed and they are set on 3.5bar pressure (1.75bar each), Stainless steal straight pipe exhaust sistem, and HKS belts.
They got me a GTR R32 Spoiler whit CF lip on it and DMax Front and rear quaterpannels.
My friend Doge sent me V$11 000 as a gift, afther that I had V$47 000, and now the engine tune and pannels costed me V$27 000.
When Ward AKA Jorge gets back home from Japan I will go to visit him in Spain and he said that he has a friend that works whit ECUs.
More photos :
Yestrday I couldn't post any updates since I lost my internet, but it came few hours ago.
Yestrday afther finishing up the R32 I got a call from my cousn to visit a car dealer near Munich.So this morning we went and I found a sweet rare car to test (the engine isn't that race) its a BMW E36 316i Compact.
Cute little RWD beast, the engine is stock but close to death its done over 570 000km and it was poor maintaned. I drove the car the susspension is great it has a set of Tein shocks & Springs and a set of 265mm brembo brakes (jaw dropping), factory 16" alloys and almoust new toyo proxes on them whit a lot of rubber on the left. Everything on the car is good except the engine, the body is stock except the rear bumper and the mufflers the previouse owner put some weird M bumper and muffler that ruined the look of the car. I decided to buy the car and work on it since its quite cheap for just V$750.
Now time to update the R32 again :
I payed a lot for the RB tune and it was worth it, the car feels so much more powerfull, made a reservation for a dyno tomorrow to check out the power output.
Today I got a package from Japan, and it was from the same company that tunned my RB.The package contained brembo 6 caliper pistons 4x painted in HKS pink and cylinder head cover painted in the same color. Got a lot things for V$27 000.
Now let me list the engine parts :
Engine block was modified, the cylinder capacity was increased from 2600ccm to 3000ccm, RB30 HKS Titanium Crankshaft, Con-Rods, Pistons, Cylinder head, Camshafts and intake manifold, HKS RB30DETT exhaust manifold whit HKS Twins giving out 4bars of boost (2 bars each). Old pipeing were replaced for a much more lighter pipeing, the new engine is way more powerfull then the old and its way more durable and lighter then the old engine.
I have almoust compleated my daily car just few more tweaks and its done. I invested in the car so far over V$50 000 and I don't regret a single pennie, meanwhile some guys say that I can not return my invested money when I sell the car but I don't give a damn cause the R32 will go away from me if I crash it or when I die and my family sells it xD.
Sup guys. I have bean bussy whit work these past 5 days and here is a update on the E36 :
Update V1 :
I started to clean up the cars body disassemble it and started to remove the old paint from the car.
Good thing the car didn't had any dents so it was easy to work on it.
Update V2 :
The car got primared and its left to dry then to spray it.
A lot of parts have bean ordered and have arrived.
Update V3 :
The car is painted. I choosed satin black cause damn I love black cars hehe.
I got my self a full //M Kit for the E36, Front, rear bumper, side skirts, mirrors, wing, quaterpanel, doors and chassis trim, and trunk door badge.
I swapped the old gril to a face lifted grill, swapped out the old shocks & springs for Scale Inovativ Shocks & Springs. The current ride height is 5.0" all over the car and I left the old Brembo 265mm brakes whit 6 pyston calipers cause those were installed a little befour the car went on sale. I decided to use the rims from my SilEighty that I kept afther selling it, SSR EX-C 17" on Toyo Proxes.
I swapped the 1.6 engine for the Straight 6 M3 engine and will finish the tune up and and make photos of it and the power output.
The costs for the car were medium in my opinion. I bought the engine, and //M Kit from a warehouse in Germany for V$5500 and the Scale Inovative Shocks & Springs for V$3000.Total cost whit the respray and parts were V$9750
Nice wheels 🙂
Thanks. Bought them a long time ago from vs shop xD
I sent the E36 to Munich to a official BMW tuner, he will finish the settings and do a dyno. In the meanwhile I found a nice car that was made in japan for japan roads and was imported to Poland. The owner agreed to come to Dortmund and let me test the car.
The car is a 1994 EJ2 Honda Civic.
K20A Type R Turbo swapped, RWD conversion and sitting low thanks to Scale Inovative Shocks & Springs (current ride height 7.50 at the front and 8.0 at the rear), 265mm brembo brakes and Zander Turbos 17" on Toyo Proxes tyres whit a little bit of meat left on them. The car got minor scratches and the paint has bleached but the price is low cause the car is whit RHD Specs. Stearing wheel is on the right side, lights are for RHD too, needs some work to convert it to European specs. The price is V$2800.
I will see to work on it or to send back to Japan. If some1 is interesed in it let me know.
polish plates are PL not P
Yeah , that's right in my Country we got PL with Euro Band or Polish Flag < Polish flag is old version > .
You made a little mistake , but its all right 😉
Well I apologise sht happends xD I thought PT were portugal and P was for Poland but sht happends. Need to fix that. Thanks for the notice
Time to travel again.
I got a phone call from montenegro to go and check out something, so I went out to refuel and time to hit the road. I wont be back in 3 to 4 days. See ya
I am currently in Podgorica, capital city of Montenegro.
The phone call that I got was from my aunt. In spring of 2007 my cousn bought a 1996 Audi A4 B5 1.8 petrol and he drove it till July 20th 2012. Sadly the last day he drove the car was the day when he got hit by electricity while installing a kitchen, he died on August 3rd and since then his wife was driving the car but now she moved whit her 2 kids to USA and the Audi got for sale so I decided to jump overthere and buy it my self cause I will allways have a reminder of my late cousn.
So that was the story why I am where I am now and my aunt wanned V$500 for it, I gave her V$750. The car is in a desperate state it has damaged paint, scratches all over it, missing body parts, 60% of the electric components are not working and needs rewireing, engine needs inspection. Currently the only good thing is the susspension and the stearing xD, the car came whit 15" steel rims (don't have any 15" on this laptop so I used 16" for the photos forgive me on that). I will transport the Audi to my place on a truck, gonna load it tomorrow and check one more car and going back home to germany.
wuuu nice audi ! . i like all cars brands but god dam dat r32 bro XD