Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
So today was an very productive day Pulled two motors and also got the 325 motor redy to be taken off tomorrow and then she will be sent to the sandblast and i'll start the swap in my mom car yeah i deiced to put the M50B25TU instead of the M52 because better Mpg and it's better for road use.Also pulled the old S14B25 that my grandpa swapped and used for most than 7years because i got something more Drift Appropriate to get into that bay.
So yesterday afther i dropped the 325 shell on the Sanblast place that i rented,i went to the classical Sub of the day as Lunch. well as the junkyard was on my way and i alredy did everthing i got planned it wont hurt to drop by and check out.
When i got there i find he next to what in the first sight looked as an complete trashed and burnt FC when i got there with an WTF expression he opened the hood and this is what i saw there.
Yeah an Jz but in that sight it got tons of dust and everthing was burnt in the bay,then i asked how much forthe engine the Junkyard would ask and the guy said as this isn't a tested engine and tranny and all the eletronics were burnt i can sell it to you for V$900 i decided to take the risks and me and my friend spent the rest of the day pulling that engine ou of there. and the night cleaning he up. well my investigation discovered that actualy this is an 2jTurbo block with an 1j Non Vvti head wich is considered an setup good for about 700/850Hp wich is exactly what i want to roll with.an yes he doesnt have a turbo but my friend helped me with an Upgraded Td06 that i am grabbing tomorrow well this next days i expect to just part out replace all the bad sutff inside he and get it ready to power the convertibe e36 that also is going to be sanblasted along with the 325i.
Economy
Junkyard 1.5JZ -V$900
TD06+upgrades -V$600
Payday +V$415
Remind me of fast and furious,The burnt supra. 😃
Aw man you make me miss my shortly owned e36 4 cylinder that looked like a M3...! Now I'm going to try to get a beemer now. Good builds you got going on.
So today i begin swapping my grey interior with my mom black one wich satisfied us both because she want a lighter car and less hot and i want to have the interior all one color so as the black was already cleaned it was almost just install but first i finished with the rollcage that i was bulding with my spare time for the whole week so i can rock the recaro 5 point harness that came with the seats also installed the Fuel safe that i got in a trade. this weekend i am planning on puting the 1j back togheter and gave the E36 his final suspension setup.
So the trade i spoke before i decided to offer tomy friend's shop the S14 from the convertible and he just said me that the engine will be perfect for their e36 track/shop car but as the 235hp from stock aren't engouth he asked me to prep the engine wich he was going to pay outside and the engine itself we agreed that i'll grab the parts on the value of the engine wich were.
Spoiler:
Ksport control drift coils
Ap racing Coils
2x Wilwood Brake kit
2x Fuelsafe Cell+Aeromotive kit
Also i finally got my plates so now the car is registered.
Added 1 minute later:
P.S. I removed the splitters because they were scrapping AF
So today i begin working on my car doing the brakes and the suspension.So for the brakes i got an wilwood setup with 300mm rotors and 6 piston cailpers and the good thing about this setup is because the cailpers alow me to run an Hydro E-brake without extra caipler but keeping the max eficiency.Also put the Ap racing coils and theya re perfect and the best part it only took me a half day.So i used my remainig time getting the 1.5JZ almost ready to be put on the 318ci i think that shuold came on the next week.
Economy
-V$800 Bunch of stuff at DIY auto tune.
Gonna check every now and then to see how that E36 turns out! Keep it up man 🙂
looks serious 😛
if you need some 1JZ/2JZ parts,ask me 🙂
That's one nice E36!
# theviilkas :
Gonna check every now and then to see how that E36 turns out! Keep it up man 🙂
Thx i hope i can keep the quality.
# soju357 :
That's one nice E36!
Thanks i also love yours s14
# juicybrate :
looks serious 😛if you need some 1JZ/2JZ parts,ask me 🙂
Thanks man but i got almost all the parts laying arround and the others i fabricated to make a little showoff at drift events.
great wheels <3
So i finaly finished my mom car. basicaly he got the completely rebuilt m50 with the auto tranny also go the engine sorted for premium gas with an custom exhaust and,reflashed ECU and other stuf fthat made he push about 230/60hp at the crankshaft wich is very good i've also put into her ride my old bilstein shocks with some bilstein b3 springs just to amke the car drive smoothly.At the exterior she just got the M mirros that i bought for security reasons and the White/red tailight wich made the car look 10x better and to finish up she got my old gray interior with M seats.I was so happy becaust this was my first complete build since i open the shop
Little pull to show what the car is capable off
Economy
E36 engine Parts and fluids -V$800
M3 mirrors and taillight -V$200
Bilstein springs -V$400
Interior steam cleaning -V$100
# Mikingo :
great wheels <3
Thanks dude i love they too
It looks really cool
# soju357 :
It looks really cool
Thanks dude .
So i just ordered some wheels for the 325 cuz i'gonna give the shooters to the convertibe (BIG UPDATE SOOOON).Yeah for rest of the week i am planning of finishing my drift car and then begin the works on the Alpina project next weeks.But today i was thinking that i may gonna need another car since i wanna completely build the 325 and maybe she wont be that good gor daily driving, the models i've searched were MK4 supras,350z(My favorite) and maybe an genesis V6. For now i just found https://losangeles.craigslist.org/lgb/cto/6131797486.html wich in my opinion looks Awesome but i'll wait to saturday to give my final judgement on he.
Economy
New wheels -V$1600
