Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
I wont have much time to catch up. There is test and tune and Irwindale, it is not too far from the shop. It is an eighth mile track, I'll be driving the notch down there. You could do some testing
# DFRacing98 :
Stock LS3? That sucks man. I'll give you the hit and three cars.
Also, the heads were new, but the block looks pretty done. I have a little while left on it. But not too long
Anyway, you still up? You have three cars and the hit, we race eighth mile
Isn't suck so much , The stock ls3 make about 460hp i think , and the foxbody is light , and mine's doesn't look so racecar , so , SLEEPER FOXBODY
I could meet you there early when the track opens, we could get good pit spots near the lanes, and make a ton of passes. It's up to you, the T&T is tomorrow.
# DFRacing98 :
Stock LS3? That sucks man. I'll give you the hit and three cars.
Also, the heads were new, but the block looks pretty done. I have a little while left on it. But not too long
Anyway, you still up? You have three cars and the hit, we race eighth mile
The problem isn't the pistons , crank , heads , The block is the problem , None 5.0 Windsor make more than 500-550hp without breaking the block , Maybe your block isn't a 5.0 Windsor , maybe is an older 5.0 or some thing like that)
Sleeper as hell, it looks like a piece of shit (in a good way xD)
Added 44 seconds later:
It is a 5.0, but the previous owner stroked it out. Its a 408 stroke I think
Stroking it is worse because the engine is receiving more stress because of the bigger displacement.
A windsor never make more than 550hp without spliting the engine , a 4.6 maybe , Maybe you hae the 4.6 modular Lincoln Marauder engine or the 5.0 triton , idk
Added 5 seconds later:
Stroking it is worse because the engine is receiving more stress because of the bigger displacement.
A windsor never make more than 550hp without spliting the engine , a 4.6 maybe , Maybe you hae the 4.6 modular Lincoln Marauder engine or the 5.0 triton , idk
Yeh, like i said the block is in pretty bad condition, it needs a 351 soon.
Added 26 seconds later:
It is a windsor
# DFRacing98 :
Sleeper as hell, it looks like a piece of shit (in a good way xD)
Hahahaha
Later i will put a blower or a Twin turbo setup ...
For now ALL MOTOR , Because the foxbody is light af , and with 460hp (i think , i will check it) , is enough for racing with some guys with the farmtruck style hahaha
Added 1 minute later:
# DFRacing98 :
Yeh, like i said the block is in pretty bad condition, it needs a 351 soon.Added 26 seconds later:
It is a windsor
Oh boi , Change the engine ASAP , The engine will be break maybe today , morning , idk , maybe with a simple revving
A good 4.6 DOHC or 5.0 Coyote will be great
Well anyway
You wanna go to the T&T tomorrow? The track is about 40 minutes away from the shop
Added 55 seconds later:
I'm gonna run it till it dies, I might pick up a new coyote 5.0
Check if the engine got some cracks , if the engine got some cracks , Take it out now , dont start it up if u don't want to damage the internals , the turbos , the intake and all the parts ...
If ur car got more oil consumption than expected , the block is cracked , Change it asap
Added 2 minutes later:
# DFRacing98 :
Well anyway
You wanna go to the T&T tomorrow? The track is about 40 minutes away from the shopAdded 55 seconds later:
I'm gonna run it till it dies, I might pick up a new coyote 5.0
Okay ! , It would be nice , Maybe the born to race scene happen xddd
460HP LS3 Street legal Foxbody vs "600hp" Twin turbo Windsor 5.0 Foxbody
It would be so fucking good
Hey , maybe an LS2 , LS3 or an LS6 would be great for your car
I've taken the engine apart, there were no cracks. I haven't even started it since I took it apart.
Added 1 minute later:
Maybe a nice ls would work
I'll see you at the T&T tomorrow. When I get home I'm gonna start the fox up, it should be fine. Might do a burnout in front of my house, or rev it up a little.
Added 54 seconds later:
Also, one more thing, the block will last me a little bit longer, because the owner barely ran it. He put new heads, made a few passes, and let it sit. That is, until he sold it to me.
Added 32 seconds later:
I should be okay for another 15-20 passes.
Be careful , your engine will be breaking soon , the 302 windsor in the 500-550 is very fragile , and in the 600's , the engine will split soon , Take it to the workshop and lower the boost for tne drag race , for avoiding breaking the block in high speed , and later , change it.
In the 480, 500 range will be good , Maaybe 520 , but if you want to run the car without spliting at more than 150 mph , lower the boost and the power for safety.
With the 600hp , in less than 200 meters your block will split.
In the 480-500 range , the engine will be safe in the drag strip.
Added 6 minutes later:
# DFRacing98 :
I've taken the engine apart, there were no cracks. I haven't even started it since I took it apart.Added 1 minute later:
Maybe a nice ls would work
I'll see you at the T&T tomorrow. When I get home I'm gonna start the fox up, it should be fine. Might do a burnout in front of my house, or rev it up a little.Added 54 seconds later:
Also, one more thing, the block will last me a little bit longer, because the owner barely ran it. He put new heads, made a few passes, and let it sit. That is, until he sold it to me.
Added 32 seconds later:
I should be okay for another 15-20 passes.
But the block is the problem , not the heads , And if the owner barely run it , the engine will last , a bit more , because the 5.0 windsor block doesn't support more than 550hp , and it yours support 600 , is because the engine is almost new and isn't raced , If u race with the 600hp , in 200 meters or little more , your block will be spliting , at high speed , and you will be crashing ur mustang. I recommend you to lower the boost in the 480-500 range , with that the engine will last much more , but you will be changing the engine soon because isn't safe to run with a car with the risk of spliting block at high speed , you know
Added 1 minute later:
for this race i recommend you to LOWER THE BOOST
Lower the power until the 480-500hp range , the engine will last much , and in the race the engine will last without spliting the engine
Added 3 minutes later:
look this , imagine this occurring at more than 120mph , this turbo 5.0 notch got 601hp , so very the same with ur car , maybe in the start your engine will be spliting like in this car
My car mph like shit, I run 10's at 105
But yeah, that would be pretty bad
Added 1 minute later:
I might turn my boost controller all the way down
Added 1 second later:
I might turn my boost controller all the way down
if u want to race without braking the engine at high speed and crashing your nice foxbody , lower the power output
It really only makes over 600 because of the Brodix heads the guy has on it. Maybe I go to a junkyard later today and pick up some stock heads.
