Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
# Lagano :
I'm interested in that RX7, how much do you want for it?
6500 V$
It's what I pay for, I'll send it
I just need to get rid of the cars fast
Added 49 minutes later:
He has very few miles for his age, he is 27 years old, and he has all the official maintenance done in oficial mazda concessionaires.
I am the third owner, the first one had it again in Japan, he then sold it in 2015 to the second owner who imported it to USA, and later , some days ago i bought it
The price can be negotiated, but I need you to take it fast
I'll take it for 6000. I'm in Japan at the moment but you can bring it to the shop in LA.
Ok , Np , Already the car is being sent, Then your pay when the truck arrives with the car
Finances :
V$ 7915+V$ 6000=V$ 13915
Added 3 minutes later:
Guys, I need the RSX to go fast, I ask 3000 for both
The type s 2004 has a salvage title suitable for rebuilt, and the 2.0 manual 2002 has a clean title, although with some cosmetic damage (paint)
If you do not want both, I ask for 1500 each
Guys, I've sold the cars!
I sold both for 3000 V$ ( 1500 each ) about an hour ago, I am now at the airport, taking a direct flight to Japan, I will move to Tsukuba, In Ibaraki prefecture, I will have a circuit near where I will live, so, I can go to Tsukuba , or go to ebisu
I'll see you in Japan!
Finances :
V$ 13000+V$ 3000=V$ 16000
Boys !
I just got to my new workshop, Now I have to find a car to do a project, I was thinking about a 180sx drift missile or something like that, Motor rb25det or rb26 (or maybe keep the sr20 until the engine bursts, or until that I decide to make a swap)
New workshop, and new project!
I arrived in Tsukuba, after a night of looking for a car to do a project, I found this Nissan 180SX, without engine, or transmission, it was a driftcar and the car raced in D1SL , Super-D , and later the owner just crashed it and raced like a missile, the previous owner had it with an SR20DET , And he destroyed the engine , quitting D1SL , Later he put an rb25 single turbo for racing in Super-D, and other things, But he disarm it to sell it, the only thing that left me from the car when it was armed, was the nardi steering wheel, the car also had a bash bar back and forth, that he also took them out, and the engine bay was modified by the previous owner to place the bash bar, The interior has carpets, panels, not the seats, or the shift lever, or the handbrake, It is a shell this car, So it will be a pretty good project, the car already has multicolored paint and several damages in a panel, but I'll leave it like that, you know, to have more
[ D R I F T M I S S I L E P O I N T S ], In addition to the previous owner of so many blows that he was given, he had to change the panels, except that, which was fine, only had damage by dents, but inside everything, I'll leave it like this, (obviously I'll put the motor, seats, hydraulic hand brake, gear lever, etc etc)
It will be a good project!





Spoiler:
180sx : - V$ 900
Tow : - V$ 100
V$ 16000 - V$ 1000 = V$ 15000
dude how you get workshop for free? :/
Oh, I have front wing, pop up light, hood, and mirror for sale. Do you need all them? Shipment is 1-2 days.
# Hidden Username :
dude how you get workshop for free? :/Oh, I have front wing, pop up light, hood, and mirror for sale. Do you need all them? Shipment is 1-2 days.
I forgot to tell that hahahaha, now I put it, The rental price is 1000V $ Monthly
And the parties, no thanks, I have a scrapyard nearby and there are lots of s chassis there, there are several parts (It is more, in this time that do not publish anything else, buy some parts and install them (besides making some bashbar) , what I'm looking for is an engine, a rb26dett converted to a rear wheel or a rb25det
The rest I find here, why scrapped parts? Simple [D R I F T M I S S I L E P O I N T S]
Finances :
V$ 15000 - V$1000 = V$14000
Update of the 180SX





I bought a pair of fenders in a scrapyard, they were very cheap, I also made two bashbar, one for the front, one for the back
Also paint them with spray (yes, it was very botched, but hey, it does not matter)
In addition to buying the hydraulic hand brake and two bucket seats
The 180sx is taking shape
I was looking on the internet (rp) and i found an RB26 with some modifications, Modification of cylinder head, stage 2 camshafts and stage 2 pistons, Although it comes without transmission, without intake, without exhaust and without turbo, Although it is a good offer, for 5500 V$, Ire to see it, also, before I'll also go see some car for daily use, maybe an aristo or a Toyota Cresta.
I will notify you just get them
Spoiler:
Parts :
Panels : V$ 400
Bashbar : V$ 30
Bucket seats : V$ 400 (pair)
Handbrake : V$ 50
Paint spray : V$ 50
Total : - V$ 929
V$ 14000 - V$ 930 = V$ 13070
180sx update

It's a little thing what I did to the car now, I changed the wheels and I put the kouki tail lights with "carbon fiber" vinyl , nothing great
Someone sent me a message about an RB26 of a Skyline R33, I asked the owner if the engine has modifications, I also asked if it was converted from all wheel drive to Rear wheel drive, I just have to wait for me to answer.


And an interesting thing, since I bought a car every day, a 1999 Toyota Aristo, in an auction for 1500 V $, is in good condition, although with the typical damage of a car of the 90s, But hey, it will be a good car for daily use
Spoiler:
Total spent :
Car : - V$ 1500
Tail lights : - V$ 500
Wheels : - V$ 700
V$ 13070 - V$ 2700 = V$ 10370
Update 180sx Proyect : NEW ENGINE!
After a lot of research, in the end I could not close the rb26 deal well, a rb25 did not interest me much, so I decided to look for some sr20, and found some that were modified and were half the price that a rb26 converted to Rear-wheel drive, So, while I was searching I found this ...

A sr20det blacktop with some modifications like ...
Tomei exhaust manifold
Yellow injector (?
T28 Turbo
In addition to bringing the gearbox, ecu, wiring, air conditioning system (that will not use it), and other things
Although it does not have an intercooler or radiator, that will be placed later
When I saw it I was interested, I talked to the owner, we met, and I bought it, the engine was in good condition, I got to work installing the engine, and here is what you see in the photos, I have to get a radiator and an intercooler with its pipes.
It was quite easy to install it because the 180sx since it was manufactured was designed to be installed a sr20det / de, Although mine was adapted for a rb25, but the only thing that the owner did was to make a hole in the floor so that the gearbox is well placed, and that hole is covered by the dashboard, then he made some adapters to place the engine, luckily, after removing the engine, the previous owner removed the adapters, leaving the frames intact, helped me a lot with that.


I have to get intercooler and radiator for now, then I'll take it to the dyno and then to tsukuba or ebisu
Spoiler:
Money spent :
Engine : - V$ 3000
V$ 10370 - V$ 3000 = V$ 7370
Added 44 minutes later:
Update 180sx: Intercooler, Radiator and some parts of the body



Taking advantage that the engine lacked very few things, I went and bought what was missing (which was the intercooler and the radiator), Then I went to a scrapyard and bought two pop up and a front bumper chuki, Although without grids or fogs, but does not matter
I installed them (Pop up left them fixed and crooked on purpose, do not judge me hahaha)
And there would be a few small things that I will look for, which would be some measurement clocks (boost controler, among other things)
It's almost over, Now when I finish it I'll go to Tsukuba to taste it
Spoiler:
Parts :
Pop ups : V$ 100
Front bumper V$ 250
Radiator : V$ 300
Intercooler : V$ 330
V$ 7370 - V$ 980 = V$ 6390
Added 16 minutes later:
180sx update: Gauges, boost controller and customized gear lever installed!


Nothing very interesting or out of the ordinary, the ls watches needed to keep the engine under control, and the lever needed it because otherwise I can not pass the changes, obviously
Spoiler:
Parts :
Boost controller : V$ 200
Gauges : V$ 100
Shifter : V$ 90
V$ 6390 - V$ 390 = V$ 6000
We went from Drift Missile to Stance



After having worked so hard in the car, seeing it like that does not convince me, so, I decided, Repair the damaged panel, put the hood on it, and make it look better, then take it to paint
Now I'm working on it to pass the technical inspection and register it
Spoiler:
Parts :
Carbon hood : V$ 950
Rear bumper : V$ 250
Type-X Wing : V$ 150
Repair Left panel : V$ 100
St8 exhaust pipe : V$ 300
V$ 6000 - V$ 1750 = V$ 4250
and you did all this in less then a day including sleep
# skip :
and you did all this in less then a day including sleep
(RL) I live in Argentina, and in this time it is day, so sometimes the hours do not match
Sorry dude this is going a bit faat. buying an Intercooler and installing it plus pix and upload in 44 minutes.... for example....