Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
You're right
I have a small tire car
Also, wrong state zoom 🙂)
They're from OKC, I live in Palmdale
Well, I have some bad news
After being out with the notch, I took it for a drive, and there is a super weird knocking. I think one of the valves got knocked out of place, and is hitting the piston. If it isn't that, I could be looking at something a lot bigger.
If I can't figure it out, I might have to rebuild or buy a new motor. As you know, this motor is used, from a 2007 mustang. So it could just be dying.
Not sure, but hopefully I figure it out.
I just ordered two tachs and shift lights, big thanks to everyone at Art Of Wheels
Added 6 minutes later:
Spoiler: V$9,330-V$540 (tachs and shift lights)
Current Balance
V$8,7290
You're welcome! 🙂 That Mustang must have a fair amount of power if it can do a wheelie! But as you know the higher the power, the higher the chance of breaking something haha. I hope that it's not a serious issue with your motor, it's from 2007 so i doubt it. You might have to clean the cylinder walls or change the spark plugs.
Yeah, I checked the plugs. I'm gonna replace the rings, and clean up the cylinder walls like you said
Check the driveshaft , or the diff
It's coming from the motor
Added 1 hour 36 minutes later:
SUCCESS!!
I finally got the turbos lined out on the GT
My boost controller kept turning itself all the way down, and I wasn't making barely any power.
Turns out one of my wires kept shorting out, it was touching the header. I resoldered the wire, and the car makes huge amounts of power.
I'm going to the track tomorrow. I bought VP100 for the notch, and E85 for the GT
Added 1 minute later:
I wish stance didn't restart 🙁
We could've raced
Just got to the track!
The pits are wide open, but I think they will fill up when the event starts tomorrow.
Okay, so today I am stocking the shop
I've given myself a two thousand dollar budget
So first, I am going to order a set of Work T7's, There is a 1600 gone.
Then, I will be selling 18x10 tires, that will fit the Work wheels. That is another 400.
Spoiler: V$8,790-V$2,000 (stocking shop)
Current Balance
V$6,790
Added 4 minutes later:
The wheels are Matte Graphite
Added 44 minutes later:
So I am just leaving the track right now.
I've decided that in order to keep the shop running, and have spare money for the GT and the RX-3, I'm going to sell my notch. It was fun, but I really have no more plans. I'm going to list the car hen I get home. If you would like to buy it, it is a great bracket car, or great project car if you would like to go faster.
Added 33 minutes later:
Alright, since I pretty much know for a fact that no one on vstanced will buy my foxbody, so lets just say the car is sold.
Spoiler: V$6,790+V$18,000 (notch)
Current Balance
V$24,790
Don't worry, I'm not dead yet
So basically, I've just been gone (oorp)
But
I have some new stuff for the RX-3
I bought new control arms, struts, and a Calvert racing 4 way racing suspension kit, with Calvert shocks, Calvert leaf springs, and Caltrac bars. The kit was V$2,000, and the tubular struts and control arms were V$1,200. I also bought brakes, they are aerospace components, 1 piston drag brakes. For V$2,500, I bought four of them
I am going to buy gold weld magnums, and put slicks on them. Then, I will build a racing rotary
Added 7 minutes later:
Spoiler: V$24,790-V$5,700 (all parts listed above)
V$19,090
V$19,090+V$655 (I missed my weekly pay this week)
Current Balance
V$19,745
So, everything is installed. Sorry if I have been gone for a really long time, I just needed a break. I also would like to buy a lift kit for my truck, and buy a trailer. I might do that tomorrow, if possible
Added 52 seconds later:
I also went street racing with the foxbody, I am number 9 on the list right now
I know for a fact I can go to number one, so I will keep updating about that
Added 20 minutes later:
I also missed my pay on monday
Spoiler: V$19,745+V$655
Current Balance
V$20,400
Added 18 minutes later:
Okay, so I did a little bit of looking, and I found this
https://www.roughcountry.com/gm-suspension-lift-kit-276.html?gclid=CjwKCAjwkrrbBRB9EiwAhlN8_OTxeXaIjqVgj8WKWH-BWhgxgn1byusql-oYtA5KXFexmeDBpT8JgBoCVpMQAvD_BwE
It is a 6 inch lift, and then I will add wider rims, and bigger tires
As for a trailer, this one looks good
https://losangeles.craigslist.org/lgb/cto/d/jimglo-21-ft-tilt-bed-trailer/6626934838.html
it is 21 feet
The kit is 1000, 1075 with shipping
The trailer is 4500, I'll try to get it for 4000, but he said 4500 firm
As for wheels and tires for the truck, I found some nice black rims that are will fit the truck nicely
https://www.summitracing.com/parts/pcw-97-5865f?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-pro-comp-wheels&gclid=CjwKCAjwkrrbBRB9EiwAhlN8_Kfgdhe-JKE_Wi1RBakq0Mq_mdZ7GhaG2w0Wzg7JNNo0DE0uEHEtRhoCkZwQAvD_BwE
For tires, I have selected thes
https://www.summitracing.com/parts/gti-04568190000?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-general-tire&gclid=CjwKCAjwkrrbBRB9EiwAhlN8_BnHhPuu5p2hmhY534qbyI19oTgPh5_c5C7miV5GJWHFIhLy_TRw1BoCcQMQAvD_BwE
For 4, will be about 900 with shipping.
So, I'm gonna order those things now, hopefully I will have them Monday or Tuesday
Spoiler: V$20,400-V$2,215 (wheels, kit, and tires)
Current Balance
V$18,185
Okay, all the parts are here early
they were all in stock at the Las Vegas superstore, despite what Summit's website said
So, I have begun tearing the stock wheels off, and I will sell those at my junk yard, along with all the other old parts
I also went and picked up the trailer yesterday
It is very nice, and will fit both of my cars perfectly
The RX-3's parts are all fitted, I will have some pictures in a couple hours
For now, I have a picture of the truck, just some progress
That is on big truck man. Looking forward to see the RX3
Yea, I didn't have any time to get some pictures, I've been super caught up with hs starting up again
The truck is a 93' gmc sierra, sadly, the motor is on it's last leg, at 300,000k miles plus, I thought about a supercharger to help it tow my trailer i bit better, but they are ridiculously expensive
