Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Thanks guys, i'm working on getting it back together.
So today i did a damage assessment for the Mazda, the frame is a little bent on the right but i can fix that. Just let me take the hammer and i'll straight it. 😛 I saw that the water tank is cracked, as well as the radiator, so i'm currently looking for these two parts. I replaced the right suspension arm but i'll have to check the allignment like Jdm_Racer mentioned. And it's time to replace the springs, look at that one on the floor. :ohsnap:
There was a big crack in the bumper, for now i just put on some duct tape. I'll get some filler and fix it later, right now i'm working on the suspension.
And i got some rims! The R33 rims arrived today, thanks KeeJay. 😉 Dunno why they're purple, i'm probably gonna paint them unless i get a purple car. 😃 The other ones are from Renaruto, which i got some time ago. If i'll have a smaller car they'll fit well.
That's all for now! :cheers:
:RICE: , that's why 😛
Good luck bro. I also recommend that you should check the chassis allingment cuz this can ruin the drivability and cant be saw on eye.
I'm working on that, i'll also have to check the rear suspension, and the chassis as well. I can still have the Civic for a daily so i'll take my time. 😛
Good Luck man hope that you car dont have any serious problems.
Just a little update for my Mazda here!
After some searching for parts i found this guy in Italy who has the same car, it's a write-off but the front end is intact so the radiator and water tank are OK, and that's what i needed! I got a good deal for those 2 parts, i got them for 80V$. Andrej started up the van and we went all the way to Udine, about 35km away.
You didn't even see our new shop van yet! Andrej bought it around a month ago, it was quite cheap for an almost new T5.
Here's the donor Mazda, it was a life saver for mine. :rolleyes: The roof is so wrecked on this thing, i was asking myself how did he even survive the crash. He told me that he hit a rock at the side of the road with the rear right wheel, and then the car jumped over the fence and rolled down onto another road!! I was shocked when i heard this, he was lucky he got away with it. I'll keep in touch with this guy if i'll need any more parts for my Mazda.
When we got back home, i started to work on my Mazda. It was a lot of work, because i was fixing up the frame, i can still hear the hammer in my head. 😛 It's slowly coming together now, i just need some springs and it will be drivable again! (maybe also some better tires so i don't spin out again!!)
Spoiler:
Radiator and water tank: 80V$
Bought some rims from HomerHarbi: 350V$
(i'm a wheel hoarder now xD)
Time to sleep now! 😃
Good to see that you're getting your Mazda back together! 😃 If you need any tips for new tires - You should get some Toyo Proxes T1R. They are kinda expensive but they grip so hard! 😃 Had them on my Miata and on the 240 aswell 😛
Hopefully the wreck doesn't set you back to far! Best of Wishes!!
@Renaruto I'm thinking the same as you! I know a Toyo shop in Slovenia so it shouldn't be a problem to get some tyres.
@THWOLF00 Don't worry, fortunately that wreck's not my Mazda, that was a donor car, i took the radiator and water tank from it. Mine is also not in the best shape but it's not so bad. (next time read carefully, i write a lot here 😛 )
Hey guys, some stuff for my Mazda has arrived, it's going well now. I got these H&R springs, the ride height is the same but the car drives more comfortably, i had cut springs before so the ride was kinda hard. 😛 They are a little harder in the front, so there won't be so much oversteer.
I also got some 245/35 ZR18 Toyo Proxes T1R tires from a Toyo shop that Andrej knows, it's like a sponsor for us.
They had to import them, because not many cars here have them and they are expensive, but i got them for a little cheaper.
Basically, the Mazda is drivable again! So i drove it, obviously, i had to try out what the handling is like. Renaruto was right, these tires have tons of grip, i can't even do a burnout now. 😃 I still have to fix the front bumper, for now i put some zipties to hold it in place, so it looks kinda legit when i drive it.
And last but not least, i got this exhaust manifold. It was quite hard to find it, because there's not so much aftermarket stuff for this engine.
You know what this is gonna be, right? :awesome:
Spoiler:
H&R springs: 199V$
Exhaust manifold and some plumbing: 460V$
Toyo Proxes T1R tires: 550V$
Oh boi.. Turbo build incoming 😮
Ye boiii! 😉
turbo gives fun right 😃 ?
Of course it'll be fun. 😉
Speaking of turbos, look what i got for my birthday!
I was wondering which turbo would fit the piping i got with the manifold, but Andrej found just the right one. All i need now is a bigass intercooler, because i want to have some more boost. 😃 Another present was a couple of rear tires for the Supra, so i had to do some donuts just for fun.
Mate sell that mazda befour u get killed.... Last time I was at you similar thing happened... That car either just brings bad luck or is haunted...