Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
Great slides man! lmk if you need help on your new build!
Thanks guys!
Was a little nervous with the car at first, didn't want to slam it into a wall haha. But i get used to it and a little braver so I went a little faster at corners. Definitely can't wait to go in my own car though.
Wow..
Excellent work man !!
:cheers: :cheers:
Thanks man!
I went and looked at a car yesterday. It was a LHD Nissan Fairlady 370Z Z34 with Nismo Skirts and Rear bumper. With a VR38DETT taken from a 2010 Nissan GTR.
I really liked the car, it drove amazingly better than I expected. It does have some paint scuffs, and STOCK as fuck suspension, as well as a set of Enkei wheels. It's definitely something i'm going to consider. I just don't want to have to drop a bunch of money into a new car, I want to be able to buy something and not have to work on it mechanically for a while.
I still have a few more cars to look at, I just figured I'd show you some of the ones that I do look at.
I HAVE MY CAR BACK!
Picked it up this morning and haven't been able to stop driving it around! I'm not exactly legal, so i've been sticking to back roads and lesser traveled roads.
As you can see I have an early version of a Type X kit on. I had these painted and installed just before I left valo. I also have a genuine 326 power wing that goes with it. I just haven't gotten around to putting it on yet, which I will do later and snap a picture for you guys.
Nice bro :3
Looking good, still low af. 😃 When did you get that new bodykit?
Really cool, 2 tone would look awesome.
# Starsky :
Nice bro :3
Thanks man! 😃
# Lagano :
Looking good, still low af. 😃 When did you get that new bodykit?
Thanks man! Forever low! haha I surprisingly rarely scrape anything though. I got the front bumper from a place called CarID, it was V$277.18 plus shipping, the skirts along with the rear bumper I got off eBay (hate doing) for V$330 plus shipping. The wing was made to order from RHDJapan, I bought it a few weeks before I left valo with intentions of picking it up in Japan. The price was crazy, but managed to talk to someone and barter it down because I was planning on picking it up. Originally it was Β₯45,333 which is roughly 7 grand in USD. Keep in mind that this is a GENUINE MADE TO ORDER 326 Power wing. The final price I paid was about Β₯35,000 which is about $5,400.
# klucifers :
Really cool, 2 tone would look awesome.
Thanks man! I would honestly love two tone, i've considered it multiple times. If I get a Silvia Coupe It'll definitely be two tone.
No wonders its not road legal check that rear windshield, you wouldnt see a freaking Airbus A350 if it were behind you, xD just kidding bruh the sx is sweet as fck :3. GL whit finidngs in Japan.
I love my slaps 😃 Most of the time I just use my side mirrors haha
Btw I got a huge poster of a japanese porn star wanna stick it on the read windshield too xD π
Send it my way, I'll make some room for her XD
So I hate Shaken (vehicle inspection in Japan). Been hard at work downgrading the 420sx so it will pass vehicle inspection here. They're very strict about some things. And very expensive with fees. I was able to pick up some stock bumpers and a set of steelies from one of the 9F crew members. Also threw the stock seats and wheel back in just to be cautious. I pulled my over fenders off as well, because she was pretty wiiiide and I wasn't sure if it would pass qualifications. I left the 326 running gear on but raised the ride height for both the front and back. I'm also hoping i'll be able to pay off the inspector to look past all of my window stickers. If not I have a pretty decent back up plan.
I also put a godfather musical horn in. Which needs to be re-wired because it will randomly go off. Pretty funny the first few times, but it gets annoying.
If you're unfamiliar or don't know, the process of the shaken involves these steps:
Spoiler:
An exterior inspection to ensure the vehicle meets Japanese exterior regulations and does not have illegal exterior modifications such as extreme body kits that increase the exterior dimensions.(Was very guilty)
A wheel alignment inspection to ensure the vehicle has its wheels in-line and can turn correctly.
A speedometer inspection to ensure the vehicle's speedometer is accurate.
A headlamp inspection to ensure that the vehicle's headlights are correctly placed and aligned.
A brake inspection to ensure the brakes work correctly.
An exhaust gas/muffler inspection which includes testing carbon monoxide and hydrocarbon emissions along with exhaust noise levels.
An undercarriage inspection which includes looking at suspension parts.
Exterior
Tailpipes: Tailpipes are not allowed to protrude past the car's body however tailpipes that are built into the side of the vehicle are allowed.
Body kits/Aero parts: Aerodynamic mirrors, windage trays under the tail section of the car and body kits using front bumper scoops are allowed. However all aerodynamic parts must fit and be molded correctly so they are flush with the car's body.
Fenders and Overfenders: All fenders and overfenders (including widebody style-kits) must not inhibit the turning of the car's wheels (which must be able to turn 30 degrees inward and 50 degrees outward).
Spoilers: All spoilers (aftermarket or OEM) must not be wider than the car's rear and must be bolted to the car's trunk.
Lamps and reflectors: Front, side, and rear turn signals; brake lights, front and rear position lights, hazard warning lights, rear reflectors, low and high beam headlamps are all required. Sidemarker reflectors and lights and fog and driving lamps are permitted. All devices must function correctly and emit or reflect the required colours of light.
Windows: No tint can be present on driver and passenger side windows however commercial UV window blocker is allowed. Lexan windows are not allowed unless they are approved via a case by case basis. Stickers/banners on the front windshield and rear glass are not allowed. etching on the windows, with the exception of VIN information, is not allowed.
Speedometer
The speedometer of the car is tested by driving up on to a dynamometer. The vehicle will be accelerated to 40 km/h twice and the vehicle's speedometer reading will be recorded; should the reading be different, it will not pass.[citation needed]
Headlamps
All headlamps must be an approved type, designed for left-hand traffic, emit white or yellow light, and be aimed correctly.[citation needed]
Exhaust and Emissions
Cars under 10 years old may emit not more than 1% carbon monoxide, and not more than 300ppm unburned hydrocarbons.[dubious β discuss] Cars older than 10 years may emit up to 4.5% carbon monoxide and up to 1200ppm unburned hydrocarbons.[dubious β discuss] This emission standard is laid out in the Japanese Emission Standard legislation.[citation needed] High flow catalytic converters are allowed.[citation needed] All oxygen sensors must be in working order along with any oil catch tanks.[citation needed] Exhaust noise is tested at a 45-degree angle, 50 centimeters (20 inches) from the tailpipe outlet[citation needed]. Vehicles up to 10 years old may emit not more than 96 decibels; older vehicles are allowed 103 dB.[citation needed]
Suspension
No bushings may be broken or in bad condition. All control arms must be in working order. There can be no rust/corrosion on springs, struts or other suspension components. If the car has 4 wheel steering it must be working. The vehicle must also meet minimum height requirements which will be checked by referencing the lowest part of the vehicle (not including the suspension components). For vehicles with 200β249 cm wheelbase they must be 8 cm off the ground and vehicles with 250β299 cm wheelbase they must be 9 cm off the ground. For all other vehicles for every 50 cm over 299 cm in wheelbase add .5 cm to the minimum height and for vehicles under 200 cm in wheelbase subtract .5 cm to the minimum height.
Interior
General interior equipment must be still intact (i.e.: dash). Roll cages (must have padding around bars) and carpet removal is allowed. Bucket seats must measure 420 mm from left to right bank but can not be over 450 mm from left exterior side to right exterior side (total width of seat). Aftermarket seats made of fiber-reinforced plastic are not allowed. Any holes or rips in seats must either be taped up or repaired.
Should a car not meet any of the tests it will have to be repaired and retested before passing.
Anyway here's how she looks right now. Stock as hell! Just hoping all the hard work pays off and I'm able to get this thing legal over here. Once legal, the transformation back will begin!
This seems kinda pointless to me... you make a car stock just to pass this inspection and then you can do anything with it? I already saw some cars with ridiculous camber and shit, but they were registered. 😃