Forum
Questions, builds, help and the odd argument. The mods and guides are out front.
# Boostio :
Ahh welcome back! That Golf looks pretty nice <3
Thanks bud! Very much appreciated! <3
Exciting stuff going on!
I've been blasting away on some bodywork on the golf the last few days. I pretty much stripped out all the interior, looked over the floor of the car. Looks suprisingly good minus some rust in some of the seams which is mostly taken cared off. I will have more updates on that in a few hours!
Until then, check this out!

A buddy of mine came over to help me work on the car and suprised me with these beauties! They are 15x8 Zender Sport's wrapped with some half decent rubber. He said we should mock them up on the car to see how they look and to me they look great! He needs them back for his own car but atleast this gave me understanding of potential wheels to run but most of all it got me motivated as hell to get this thing done and out on the streets of Europe!
Expect an update in a few hours with even more excting news!
Spoiler:
Something like this would go great with the colour I have in mind for the car!

Bodywork and other fun stuff!
So, alot of sanding has been done in the last few days since I got the car. As soon as it was in the garage I cracked on with the bodywork. I got most of the rust taken cared off however there is still some left at the common areas where these like to rust such as the bottoms of the doors etc. I still need to go in at some places and weld in new metal since there was some holes aswell. Nothing major though so that's nice.


I lucked out with the boot when it came to rust! I was expecting worse since water has been leaking in through the bootseal and such.

Im gonna be honest with you and say I expected the worst when I took out the carpet. However, I was greated with this instead! Now, there is some rust starting to develop in the passenger footwell that will go through at any moment aswell as some at the seatmounts but other than its farely clean in there!

Im obviously super stoked about the car however the stock CL interior just wont cut it for me. So I started looking into my options. I knew I wanted something that would brighten up the car. Something that looked luxurious to me. With that in mind I came across this!

I found a guy on ebay, located in United States, that was selling a complete interior for my car. This included everything I needed. Doorcards, seats, dash, centerconsole, headliner... You name it. From my understanding this brown and beige combination interior only came in the US versions of the MK2s (dont roast me if im wrong plz 😉 ) and is getting hard to find these days so I quickly got in contact with the guy and we agreed that 1200V$ was fair. Add another 600V$ for the shipping costs aswell. It should be here in about 5-10 business days!
Spoiler:
10995V$
- Weekly paycheck = 550V$
- Full interior w/ shipping = 1800V$
- Orbital sander w/ sandpaper and various other stuff = 175V$
New total = 9570V$
I think im gonna start tackling the suspension and the more mechanical bits of the car while I wait for the interior to arrive. Might look into converting the rear brakes to disc brakes because I hate drum brakes with a passion. While its not gonna be a performance oriented car I would like to at the very least service them with new brake pads and cylinders. A set off coilovers would be nice aswell 🙂 🙂
I think im gonna end up servicing the engine with new oil, timing belt and tensioner. Also sort out a new alternator for it or try to get this one working. After that im probably gonna try to sell the engine to fund the remaining bits I need!
Until next time!
Time For Scrapes & Lows!
Well, since u last heard from me IΒ΄ve been hard at work. I've replaced various bushings throughout the car. I picked up the Superpro Front & Rear Suspension Bushing Kit for 215V$ and just went to town with it. It will hopefully stiffen up the car some even though I dont plan on racing it on any tracks. Not gonna lie, the ones in the rear axle definately put up a fight. The other ones went in farely easy.
Now to the exciting stuff!
I've been looking for wheels ever since I got the car and finally made a purchase. Now, I'm gonna end up having multiple different sets of rims but for starter rims I reckon these will look awesome. They definately burnt a hole in my pocket with the tyres mounted but they fit the theme im going for here.
And since I was gonna have to get coilovers anyhow I went ahead and got a set of Ta Technix Coilovers aswell. Yes they are among the cheapest ones out there but eventually we might get better ones. It all comes down to how these feel once im driving.
So, here is some pictures of how its sitting right now!


The rims are SSR mk1's. They are 15x7.5 in the front and 15x8.5 in the rear. They look sick in my opinion. Im gonna play around with some camber settings to make them fit exactly how I want to because the rear is rubbing the inner fenders. Fronts seem good though. Will figure all this out once I take a test drive.
My interior should show up any day now aswell. Cant wait to put it in to see how it looks. I have so much in store for this car and I cant wait to get her out and scrape all over! 🙂) 🙂)
Til next time!
Spoiler:
SSR MK1's - 1,302V$
Tyres - 800V$
Bushings - 215V$
Ta Technix Coilovers - 412V$
9570-2729=6841V$
New total: 6841V$
damm thats cool
I almost put that wheels on my miata
Zenders looked way better on your Mk2 but if you're going to keep it slammed the SSR's look nice too. When you'll install the interior and everything else the car will be a little lower so be careful not to scrape. 😛
Nice golf!
Sick golf build! Wheels look really good on it!
Thanks Guys!
She's Straight!
SO, if u can remember when I picked up the car it had some panel gap. Worst places were the hood and passenger door. Turned out to be easy fixes for both of them. The hood was a bit bent up from what I guess would be a collision. But after some work with a wooden block and a big ol' hammer it was almost perfect. I did however use some bodyfiller to fill in the imperfections afterwards.
As for the door, it was the bottom hinge that had alot of play in it. This seems to be common on MK2's. But I bought a new pin and half hinge from Ebay which when installed fixed my problems.
Spoiler:
BEFORE

AFTER

Spoiler:
BEFORE

AFTER

In other news I received the interior last week. Its been sitting in the box ever since but I will get to it this weekend. Cant wait to see how it looks! 🙂)
Spoiler:
Door Pin & Hinge - 15V$
Weekly Paycheck - 550V$
New total: 7376V$
Interior is in!
In my last update I mentioned that my interior had arrived and now it's finally test fitted in the car. It's coming back out since the inside of the car is getting painted aswell but atleast I know what to look forwards to now.




I'm so stoked on how it looks. It's really clean aswell. No tears in the carpet or any major stains. Bit dusty at the most.
I also picked up some US spec small bumpers. Both front and rear for 675V$ shipped and at my shop. Got them on the car aswell and they look awesome!


I specifically wanted the bumpers with the double chrome line going across. I dont know, they just look best to me. I will need to refurbish these ones since they are farely faded but I dont mind. Gives me something to do while the rest of the car is getting painted.
I removed the engine last weekend aswell. Looks like I may have a buyer for it already. I wont use it since im going down the 16 valve route so any extra money is nice.

And yes, the engine bay is also getting painted 🙂 . Im leaning towards gun metal grey atm. I think that would look good with the exterior colour once its painted.
it would be awesome if it had an Audi20v engine
ABF Swap?
Dope interior mate.