VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ ALAN's Project Y...
 
Notifications
Clear all

V$ ALAN's Project Yachts

47 Posts
19 Users
0 Reactions
24.5 K Views
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

You should go small streetable single turbo, will be maaad 🙂)



   
ReplyQuote
Holy_Shit_Man
(@holy_shit_man_3240)
Member Moderator
Joined: 14 years ago
Posts: 2251
Topic starter  

Buff me up

Being busy with life made me abandon my project car a bit. But not much - the turbo is here, Along with other small changes.
And it's amazing. Just the turbo and camshaft setting buffed it up to 705BHP@7750RPM according to dyno we've ran.

But it wasn't that easy to achieve. Actually, I was afraid to drop full 4 bars it was set to, because it is a lot, and I don't want to break the engine. Trial and error me and Mike found out that a little under 2 bars will be good for everyday ricer bashing use. I might even set it lower, because - who needs that much anyway (hate me now). Also we needed piping to fit intercooler, which I couldn't find any over the Internet. So, we went to local shop and ordered custom one 😃

Except of turbo (and intake/exhaust manifolds), the camshaft was improved too - made custom ones of JUN rolls (I don't know how they are called) with Tomei pulleys. I heard that it should make whole engine last longer (which I hope they will, I don't mind breaking it, especially when it's my only car I use for my carguyism and daily driving)

I can say I've finished my work on engine. At least until something will break.

Barely fits

Now - suspension. I know what I'm going to do with this, now just to get them.

Spoiler:
1573$
+ 2490$ (6x weekly salary)
+ 150$ (sold unused engine parts)
- 2024$ (RB27 - turbo + manifolds + camshaft pulleys)
= 2189$



   
ReplyQuote
Benny
(@benny_8309)
Noble Member
Joined: 13 years ago
Posts: 1141
 

Damn what a sweet skyline... Performance is similar to by HCR32, gl whit it



   
ReplyQuote
Holy_Shit_Man
(@holy_shit_man_3240)
Member Moderator
Joined: 14 years ago
Posts: 2251
Topic starter  

Time to Scale things up

Old suspension could barely keep up with that much of power. Actually, flatting out felt like boat at heavy wind. Or rather tornado. Not safe for sure.
I though a lot about what way to go with new suspension, and I found out I can't decide.

Anyway, we went to check the suspension once again to check what can stay and what have to go. I'm not much of mechanic, but I can say that it was looking as bad as driving. Not broken, obviously, it passed all the tests and nothing felt off when I was driving around.

That fitment though

Lack of parts kicked in again. If I wanted original BNCR33 parts I'd have to go to Philippines. And I didn't. I went with Japspeed lower arms which looked just right in term of both quality and price. Driftworks kit costs more than twice more, and it is intended for more track oriented use than I'll ever need.

That front fitment though

Note the fitment on front. It's GTR kit and so is wheel offset (at least it looks like it to me, I'm not mechanic). It's a bit awkward to see the wheels stick out so much, but it's unfinished and I plan on going wide with it. So it's cool with me. Tires rub on arches when I'm driving on curbs and such, but I try to not drive on them so much 😉
I could raise it up a bit, but I don't mind asking Mike to do it, since not it sits great and it took a bigger bit of time to make it. Oh, yeah, I got Scale Innovative coilover set which I found out is "easily" adjustable - few bolts, few other metal parts and you are ready to go.

That rear fitment though

I got to say - these coilovers are really awesome. It's really comfortable, even though it's really rigid. I'm really fancy on going on some race track with it. But it'll happen after I do rest of things I keep in my head...

Now it's your chance to choose what kind of bodykit would you like to see on it:

a) GTR replica

b) BN-Sports style
c) Some 2000's fancy rice

Spoiler:
2189$
+ 2490$ (6x weekly salary)
- 1200$ (Japspeed suspension set)
- 1245$ (Scale Innovative coilover set)
- 718$ (Recaro bucket seat for driver)
= 1516$



   
ReplyQuote
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

Go for the GTR Replica boi!



   
ReplyQuote
Hyped
(@hyped_18966)
Reputable Member
Joined: 11 years ago
Posts: 258
 

I miss driving my r32. Its been sitting in the back of the garage for so long now because, I have no time to drive her. ;(

And I agree, go with the replica!



   
ReplyQuote
Driftphantom
(@driftphantom_6153)
Honorable Member
Joined: 13 years ago
Posts: 650
 

Go BN sports man! How do the Scale coilovers feel? I think you are the first car I have seen run them so far I am wondering if they would be worth it for the s14



   
ReplyQuote
Holy_Shit_Man
(@holy_shit_man_3240)
Member Moderator
Joined: 14 years ago
Posts: 2251
Topic starter  

Two votes for replica, one vote for BN Sports.

Scale Innovative coilovers are pricy but worth the money. Go for it, you won't regret 🙂



   
ReplyQuote
Benny
(@benny_8309)
Noble Member
Joined: 13 years ago
Posts: 1141
 

I will say Replica just to eventhe score 😃



   
ReplyQuote
David_2709
(@david_2709_7791)
Noble Member
Joined: 13 years ago
Posts: 1882
 

2000s style
UG2 ftw



   
ReplyQuote
Lagano
(@lagano_19398)
Noble Member
Joined: 11 years ago
Posts: 1731
 

Those rims look like rice, so a rice bodykit would fit with them. 😛



   
ReplyQuote
Holy_Shit_Man
(@holy_shit_man_3240)
Member Moderator
Joined: 14 years ago
Posts: 2251
Topic starter  

I'm going to change those wheels. I'm not saying I've chosen what I'm going to do with that R33 (as you choose), but those Rotis don't fit on any variant.



   
ReplyQuote
Facepalm
(@facepalm_5806)
Noble Member
Joined: 13 years ago
Posts: 1433
 

I do wonder what wheels you'll get...



   
ReplyQuote
FastCars
(@fastcars_24414)
Reputable Member
Joined: 10 years ago
Posts: 417
 

Lmao



   
ReplyQuote
Holy_Shit_Man
(@holy_shit_man_3240)
Member Moderator
Joined: 14 years ago
Posts: 2251
Topic starter  

Broken promises

Yes, I know many of you wanted to see this as something like GTR. I even had an idea how to do it. But it didn't worked. In fact - I couldn't find anything. Bumpers, fenders... Nothing.

But.

Richard Dreemurr (you may know him from his Road to Glory blog) sent me an interesting contact. Basically, there's a guy who imports parts from Japan. Long story short we found out he has genuine PS Duce bodykit in his store - some guy ordered it, but never bought it.
I thought - why not? There's no such thing as finished project car, and in the end I can buy another one. GTR. It'll surely be easier than finding GTR parts.

As you probably noticed, the bodykit isn't the only thing that changed. There's new hood and grille - the only spares Alex (previous owner) had. I've never tried them on. And I really regret not doing it. It looks so dope (IMO). I don't know why, but it reminds me of the Odyvia converts S13 drivers used to do.

That feeling when complete bodykit imported from Japan is cheaper than rims you got in your country. But it wasn't that much - considering their unicorn-ness and prices of many new aftermarket wheels.

With new bodykit, there's new stance. Old setting didn't fit it at all, obviously, so we got to drop both front (a bit) and rear (a bigger bit). Sits pretty nice, doesn't it?

The interior is still the same though. And I'm not going to change it soon, maybe I'll replace passenger seat with some bucket too to fit the other one, but it's not my priority - I may end up with removing it as well 😉

Cruising with Mike. I love that part of Valo!

Spoiler:
1516$
+ 1660$ (4x weekly salary)
- 800$ (PS Duce front bumper, rear bumper, side skirts, front and rear fenders)
- 1350$ (Volk Racing CV-Pro wheel set)
- 200$ (GTS spare parts, obviously)
- 400$ (painting)
= 426$



   
ReplyQuote
Page 2 / 4
Share: