VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ saletl's RP jour...
 
Notifications
Clear all

V$ saletl's RP journey to succes

231 Posts
22 Users
0 Reactions
112.9 K Views
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# Sleepin mOnkey :
Nice rides dude

thx buddy!

So yesterday I finished the "paintjob" and the S14 got towed to SELFIT for the clear coat.

Rest of the day I fixed the Aristo. A defective fusebox caused the main failure so that was fixed cheap. Cleaned it and changed the fluids. At UpGarage I got badges for grill and trunk, "new" headlights and a set of very good conditioned HRE 18"s. Spend all in all 980 V$. So that's than 1580,- for a sweet running Aristo. Putted it on GooNet and got so requests. We'll see.

So it's early Friday here in Japan and I'm heading towards Yashio to see Lagano. On the way back I'll stop in Nikkō to grap a set of 18" work seeker cx i got at yahoo for 1.292 V$. It's on tires so could go straight to the S14.



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

put the aristo on uber and afther a little start drifting each corner you can just for fun.



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# Sleepin mOnkey :
put the aristo on uber and afther a little start drifting each corner you can just for fun.

Haha, would be funny for sure.
So as I spend most of the time on the road today (better say yesterday as it's 2:48 am here) not much changes on cars.
I managed my way to Lagano for swapping stuff. The bumpers where in almost perfect condition so thanks for that. Surely we had a chat and I hope we'll meet again soon. As mentioned, I stopped at Nikko to pic up wheel for the s14. Also Everything went just fine. Except I really struggled with getting all the stuff inside the IS. So on my way home I called the lexus shop and asked if I could turn the IS in something more... usefull for my buiseness. So we'll see tomorrow.

So I got back to Chiungs garage as he brought the Silvia to his place as the engine will arrive there tomorrow. Yeah!

I had to leave quick, as a guy wanted to check out the Aristo. So... it's sold. Got 3.500 V$ for it. I hoped for more but I was too exhausted from the day so I'm just happy I could make some quick money.

Back at C's place I couldn't beleve my eyes as he dipped the bumpers in black and installed them (well not propper just to see how the turn out).

We planned to install the wheels, but until now we had a couple of beers and a lot of talk. So... more tomorrow, good night!

Finances: 6.003V$ -50V$ fuel -1.292V$ wheels -40V$ beers/food -980V$ aristo parts +3.500V$ aristo =7.141V$



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

Let's update this...

So, started early this morning. Wheels are on and of course I need some spacers for the rear ones. (Upgarage her I come)

Engine arrived and those 2.500 V$ for the rework are very well invested. It's now complete on new sealings and coils are reworked. It's a small turbocharger (had original 5.000 km on it so almost new). The Intercooler is not yet installed. I love the custom covers in Neo Chrome with the Tomai plate 🙂

Some more arrived this morning... Stay tuned.

So a view things happened so far. After the long chat with chiung (I mentioned that before) we combined our shops and I moved to his workshop. So I pay the same rent but the location is way better and the is more space. We call it Hardtuned Garage. 😉

We went to a Salvage Auction, basicly just to browse... but I got this beast.

Toyota Altezza RS
Bad front crash. We inspected carefully and agreed it's worth a try.
Maaaaany aftermarket parts. But It needs a looooooot of love. -2.265V$

As I don't have the budged now... maybe some of you are interessted in a year 2000 RX7FD3S
It's slightly damaged on the front and you might need to replace the airbag cover in the dash but it's worth a project.

They ask for 3.170 V$
Engine works!

7.141V$ -2.500v$ engine -2.265V$ altezza = 2.376V$



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

If you're able to read you avoid misstakes... :facepalm:
We went to Ebisu, but someone (us) got the wrong date. Of course there was no action at Ebisu at all. Ok except free Drifting.
So we had some chats and I managed to take some pics. It's not drift able yet as the setup is just for the streets. (massive understeering).

That engine.... :-X

So we're back at the shop and waiting for some friend comming by.
Cheers

(OFF RP: I needed to change the wheels as the Seeker keep crashing my game 🙁)



   
ReplyQuote
ErwinFenyvesi23
(@erwinfenyvesi23_28263)
Honorable Member
Joined: 9 years ago
Posts: 717
 

Dude ! That's an amaizing looking RB ! How did you manage to get such a stunning looking valve cover ?



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# ErwinFenyvesi23 :
Dude ! That's an amaizing looking RB ! How did you manage to get such a stunning looking valve cover ?

Thx buddy! It's neo chromed. That means it got chromed and than too to an "oilslick" bath. Same to the Trubo horn.
I'm really happy how that S14 turns out. As I'm still running on many stock parts I need to sort out what to do next.
Guess... first would be the brake system....



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

Just raise those psi's on the rear and lower on the front it surely will do at least some donuts



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# Sleepin mOnkey :
Just raise those psi's on the rear and lower on the front it surely will do at least some donuts

Nice idea, donuts worked out with this setup as well. 😉

Got my royal gip delivery, as I mentioned. Countains two wheel. Here is on of it.

The wheel is made of layered Maple wood and the tri is covered is coated to maake it look like griptape.
I'm a skater what do you expect 🙂 It won't stay in the S14 as the other one matches the car way better.

Also we had talked a guy into the Altezza! We convinced him to spend 10k. So this project pays itself, we'll
see how much profit we'll make at the end. But it gives us a bit of space to work with.

An of course I've beend busy to fill that space :
I spend 500V$ and got brilliant projects.

1969 Hoku

This 198? S13

with a trunk full of "goodies"

and maybe a engine that'll work some day

So we're at 1.876 V$ these deals better work out...

btw. I'm selling the cressida.



   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

That Hakosuka is veeerrryy rusty....
It'll be pretty hard to restore it in that condition.



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# skip :
That Hakosuka is veeerrryy rusty....
It'll be pretty hard to restore it in that condition.

Yes Sir! But it's not impossible and sure woth a try!



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

That hako isnt that bad but a good bodywork is a must on he (if you find another shell let me know)



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# Sleepin mOnkey :
That hako isnt that bad but a good bodywork is a must on he (if you find another shell let me know)

Actually there two more shells. One Hoku and a C110.
It dependes how much you'd like to spend...

Let me lift the interesting stuff for you:
Nissan Skyline C10 GT - 760V$
Nissan Skyline GC110 shell only - 608V$
Nissan Z32 - 1.368 V$
Nissan 240Z - 3.800 V$
Toyota AE86 Levin - 1.580 V$
Toyota Supra 1992 - 1.444 V$
Mazda RX8 - 378 V$ (!!!)
3 RX7 FC3's - 2.128V$ / 2.280V$ / 3.040V$ (D1 Specs no engine)

I would help with the handling, DM me if needed something.



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

The classic skylines ill take ill call my importer guy



   
ReplyQuote
saletl
(@saletl_29244)
Reputable Member
Joined: 9 years ago
Posts: 418
Topic starter  

# Sleepin mOnkey :
The classic skylines ill take ill call my importer guy

So I could pic them up for you tomorrow. Would be good if the forwarder could pic those up at my place

The C110

The Hoku (now guaranty if engine is working)



   
ReplyQuote
Page 3 / 16
Share: