VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

V$ Crazy's Role Pla...
 
Notifications
Clear all

V$ Crazy's Role Play

485 Posts
52 Users
0 Reactions
353.4 K Views
JF1
 JF1
(@jf1_12736)
Noble Member
Joined: 12 years ago
Posts: 1166
 

Nice work on the swap, C88. Also, I see it's now red again.



   
ReplyQuote
Crazy_Eighty_Eight
(@crazy_eighty_eight_24547)
Reputable Member
Joined: 10 years ago
Posts: 279
Topic starter  

Mustang Update

So since I bought the Mustang I didn't really know what I wanted to do with it, do I supercharge it, turbocharge it, crash it ?, I wanted to keep it N/A and track it but then it hit me, fuck it, lets just slap a Roush Stage 2 Supercharger and see where this goes.

So here's the CRWDKLR 3.0's new look.

So lets go down the parts list:

Roush Stage 2 Supercharger Roots Style

DeatschWerks EV14 DV2 Fuel Injectors

Defi Boost Gauge

Roush Quarter Window Louvers

Roush Rear Spoiler

19" Toyo R888 w Yellow Lettering

Re-Painted Jet Black

BOSS 302 Recaros Seats

I bought the BOSS 302 intake manifold to go high powered N/A but I ended up returning it for my current setup, now lets talk specs the car as of now makes 647HP & 662TQ with the tune from Racers Edge in tandem with the new fuel injectors the car makes 22HP and a whole 137TQs more than the what the supercharger was projected to make, and I'll be honest with you the car is crazy to drive now, I'm legit scared to go at full pace since I got these stickier tires I could be a bit more brave but I'm not gonna risk it, but it's fun as fuck and to add with the deadly power the car has to look the part so I had it murdered, Jet Black and aggressive Roush Aero and to stand out the yellow Toyo lettering.

That's the Mustang's update done with, I'm gonna update each car at a time and not just pile em on in one update, the Corrado is currently being worked and the engine is being prepared for shipping.

# KondzixsPL :
Okay, how much with shipping to the UK?

That'll be a V$450 shipping cost.

Spoiler:

Pay Day

Hourly Wage: V$20.00 No overtime.

Weekly Wage: V$800.00

Commission Per Vehicle: V$800 + Delivery Cost V$150

Monthly + Commission (4 Vehicles Sold "4 delivered personally") = V$3,466.67 + V$3,900.00

= V$7,366.67

Last Months Funds & Purchases:

V$25,339.51

Purchases:

Roush Stage 2 Supercharger Kit : V$5,000
Roush Spoiler & Quarter Vents : V$550
2x Defi Boost Gauge: V$120
Air Vent Cup Holder: V$50
Apexi Super Computer: V$550
"SPECIAL SURPRISE" : V$800
"SUPER SPECIAL SURPRISE" V$1,350
DeatschWerks EV14 DV2 Fuel Injectors V$140
Toyo R888 : V$750
Paint Job: V$1,000

Total: V$10,310

Remainder:

V$25,339.51-V$9,310.00 = V$15,029.51

Current Funds:

V$15,029.51+V$7,366.67=V$22,396.18



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

Each horse represent's extra crowd killing capability



   
ReplyQuote
Snowyy
(@snowyy_24467)
Honorable Member
Joined: 10 years ago
Posts: 551
 

1650V$? Okay, we'll take it.



   
ReplyQuote
JF1
 JF1
(@jf1_12736)
Noble Member
Joined: 12 years ago
Posts: 1166
 

Have you purchased 15*52 rims?



   
ReplyQuote
Crazy_Eighty_Eight
(@crazy_eighty_eight_24547)
Reputable Member
Joined: 10 years ago
Posts: 279
Topic starter  

# Jfernando1 :
Have you purchased 15*52 rims?

Shush don't spoil it



   
ReplyQuote
JF1
 JF1
(@jf1_12736)
Noble Member
Joined: 12 years ago
Posts: 1166
 

It'll look good.



   
ReplyQuote
Crazy_Eighty_Eight
(@crazy_eighty_eight_24547)
Reputable Member
Joined: 10 years ago
Posts: 279
Topic starter  

Um well fuck me....


Guess who made a huge financial mistake over the past week ?

And that mistake was buying a new car, with absolutley no money, nah I'm joking

but I did lose an important car though


I had to finally let go of the infamous Spoon RSX.

I kept having to make it over repeatedly then my skin save got fucked since my game crapped itself so I finally had to get rid of it sadly.


I got a pretty penny for it, I got the car appraised with all its parts and work done for V$25,000 but with a bit negotiation skill I was able to get the car sold for V$28,000 a whopping 7 times more for how much I paid for it in the beginning, now I'm kinda bummed the plan never went through with it but she would be put to good use with a new owner.

Now on to my financial mistake, I give you the most pocket churning thing I've ever invested money in. this......

Yes I've bought a 2010 GTR (R35) but I may have been exaggerating a bit with financial mistake I actually got it on a lease.

The car is basically an old car but this one has 66,XXX miles on the clock which is considered high for an R35, the value on this one is V$54,148.00.

My payment plan for it is actually good with my salary, with a down payment of V$3,900 and V$1,400 for 36 months.

So this car is gonna be a permanent addition to my garage for sometime, I may speed up the payments later on.

I finally own a GTR,

and I would talk on why I bought it and the cars details in another update.


Can someone make the 2009 Rims ? Please ?


But for now updates on the Swaggen.

Now since the car is a G60 model the front subframe was for the G60 PG engine not the VR6 clearly so I had to source a subframe from other models, the VR6 Corrado subframe is a no brainer but it's too expensive and hard to find in my area the only compatible models where the 90's VR6 Passat and the Mk3 Golf, so I ended up shipping a Mark 3 Golf VR6 subframe from Europe.

REFERENCE


in addition to the subframe I also ordered VR6 Engine mounts from BFI.

I got them last week and had them installed and also had the engine put in, it's not permanently installed right now but it was just test fitted.

And oh yeah I got the covers painted Ruby Red I was gonna chrome them but idk I'll probably get the intake chromed instead.

Everything is going well, except my wallet.

"Nervous laughter"


KondzixsPL PM me for the engine link.

Spoiler:

W's for the wallet

Acura RSX: -SOLD- V$28,000

G60 Motor:-SOLD- V$1,620.00

L's for the wallet

2010 Nissan GTR (R35)

Down payment: V$3,900.00

Volkswagen Golf Mark 3 Subframe: V$220

BFI VR6 Engine Mounts: V$128

Total: V$4,248.00

Wallet:

V$22,396.18 + V$28,000.00-V$4,248.00

=V$47,748.18



   
ReplyQuote
Snowyy
(@snowyy_24467)
Honorable Member
Joined: 10 years ago
Posts: 551
 

Well, all look good, especally the Corrado. Though the red doesn't really speak to me but it's your VW and your VR6
((I already have the engine if you're talking about one that comes with the Corrado mod))



   
ReplyQuote
Crazy_Eighty_Eight
(@crazy_eighty_eight_24547)
Reputable Member
Joined: 10 years ago
Posts: 279
Topic starter  

I've yet to show the progress of the 180SX but this will do until I have time to write up a proper update:



   
ReplyQuote
Snowyy
(@snowyy_24467)
Honorable Member
Joined: 10 years ago
Posts: 551
 

can't wait for the reveal
((and you've yet to pm me the engine))



   
ReplyQuote
Crazy_Eighty_Eight
(@crazy_eighty_eight_24547)
Reputable Member
Joined: 10 years ago
Posts: 279
Topic starter  

pre


pre




   
ReplyQuote
skip
 skip
(@skip_20506)
Noble Member
Joined: 11 years ago
Posts: 1205
 

Nice to see your still rocking the Opposite Style banner! 🙂
Still waiting to see the full reveal lol.



   
ReplyQuote
Crazy_Eighty_Eight
(@crazy_eighty_eight_24547)
Reputable Member
Joined: 10 years ago
Posts: 279
Topic starter  

# skip :
Nice to see your still rocking the Opposite Style banner! 🙂
Still waiting to see the full reveal lol.

It suits the car so good if you have a new design run that shit immediately.

pre

pre

If you've been following any of my builds they usually don't stay the same for long periods of time I always buy new shit and hoard parts and rims in my garage.

And this car is the purest example of vision that always changes, from the onset I wanted to have this car looking like a clean early 90's drift car then hotboi styling with a bit of VIP and so on and son on, now I think I finally settled on the cars new look. pre

pre

Details:

Now the main image of the car hasn't change I'm keeping it as clean as possible retaining that stock glow with a bit of uniqueness to it, now lets start with the obvious Type X body kit, now from the onset I loved the 2 Tone color scheme of the early S13's and 180SX's and implemented it into this late model, what was a bit off was the cars chuki front didn't really flow well with the color scheme as well as the Pig Nose front since the trim on a Pig Nose wraps around the bumper and separates the colors.

So I went with another option the Type X front, I saw a few guys do and took some inspiration from them, but why stop there ? I bought the entire body option, Front Bumper + Lights and aftermarket Lip, Side Skirts and rear Valances I just needed to make the car look complete all the way around, to add to the body I added some parts from D Max as well a DMAX styled hood and DMAX 30mm wide rear over fenders to accommodate the wider wheels; those being chrome 17" X 10 Work VS-KFs with some red caps I bought afterwards wasn't really digging the standard black caps.

Little minor exterior touches are my new lewd hentai slaps strewn around the windows, yellow tinted headlamps, some more 90's slaps and a Nismo sticker I made to replace the Violent sticker I had and oh.. I pinstriped my clear lights I think it fits.


pre

Interior wise I bought new Bride Low Max seats and I got the door sills and roof lining reupholstered in this custom Japanese floral design.

And finally the part of the car that really needed some upgrades the motor, yes I had my Head Cover also covered in a floral design.

I'm just gonna list all the mods and improvements:

ISR Performance RamHorn Top Mount Manifold

Garrett GTX2863R Ball Bearing Turbocharger

Ported Stock Intake Manifold ( Painted Metal Flake Black )

Mishimoto Radiator

HKS Pod Filter

Custom Oil Catch Can

ARC Intercooler + Custom Intercooler Piping

Tomei PonCams + Comp Valve Springs & BC Titanium Retainers

Haltech Elite 550 + SR20 Plug and Play Loom

HKS 750cc Injectors + ISR Performance Fuel Pump

Kakimoto Exhaust System

The internals have not been touched yet, the build itself is pretty mild my mechanic rated the car to make about 400HP which for me is great, the car is getting a dyno tune later in the week so I can finally push it.

For now the car is complete some minor things might be changed but for now it's staying like this.

After a month of work done on it I'm contented for now.

I have shown my new car some love but I'll give it a spotlight another time.

Spoiler:

Expenses:

ISR Performance RamHorn Top Mount Exhaust Manifold: V$750.00

Garrett GTX2863R Ball Bearing Turbocharger:V$1,250.00

Ported Stock Intake Manifold ( Painted Metal Flake Black ):V$200.00

Mishimoto Radiator: V$320.00

HKS Green Pod Filter: V$55.00

Custom Oil Catch Can: V$250.00

ARC Intercooler + Custom Intercooler Piping: V$800.00

Tomei PonCams + Comp Valve Springs & BC Titanium Retainers: V$360.00

Haltech Elite 550 + SR20 Plug and Play Loom: V$1,000.00

HKS 750cc Injectors + ISR Performance Fuel Pump: V$260.00

Kakimoto Exhaust System: V$635.00

Labour: V$2,500.00

Bride Seats: V$434.00

Custom Upholstery : V$120.00

OEM Type X Front Bumper : V$240.00

Aftermarket Type X Lip : V$250.00

OEM Type X Signal Lights: V$132.00

Circuit Sports LED Type X Fogs: V$85.00

Type X Side Skirts: V$300.00

Type X Valances: V$200.00

DMAX Rear Over Fenders & Hood: V$500.00

Work VS-KF's : V$1,200

Work VS Red cap: V$45.00

Stickers : V$15.00

Shipping Cost: V$650.00

Total Bill: V$10,051.00

Wallet:

V$47,748.18-V$10,051.00 = V$37,697.18

The Corrado however needs a lot more attention till it's finished

Spoiler:
Front Bumper & Lights
Lip Side Skirts and Valances



   
ReplyQuote
Snowyy
(@snowyy_24467)
Honorable Member
Joined: 10 years ago
Posts: 551
 

I love it <3



   
ReplyQuote
Page 15 / 33
Share: