VStanced/mods
Submit a mod
Mods Guides Forum Submit a mod Log in Register

Forum

Questions, builds, help and the odd argument. The mods and guides are out front.

Notifications
Clear all

V$ Soju's RP Build

1,000 Posts
85 Users
0 Reactions
528.4 K Views
Nightkid
(@nightkid_30722)
Prominent Member
Joined: 9 years ago
Posts: 783
 

looking really nice !



   
ReplyQuote
Soju
 Soju
(@soju_17961)
Noble Member
Joined: 11 years ago
Posts: 1225
Topic starter  

Here We Go Again

So... yeah. I kinda bought the '88 FC RX-7 from the Facebook tuner community in Korea. Long story short, I brought something rather unexpected.

Well, I was scrolling through some Facebook page, and found out that the FC was kinda lying around somewhere near Daegu and it was for sale around V$ 6500.

FDs are relatively common to find, but FC... is a whole different story.

Some 1st generation JDM tuners around early '00s were known to use FCs for rotary engine research. It's basically a piece of Korean tuner history.

Mr. Yoon, the owner, was maintaining the car relatively well. Let's say it is "preserved", regarding the condition and rarity of these here in Korea.

It was running well and nothing much showed any problems besides the old tires and the bushings, and some hose leaks.

Drove all the way back to Seoul for 3 hours, and this is what I got in the first place.

Front, the Watanabe wheels. Not bad for these 80's cars I guess.

Rear, the SSR mesh wheels. Not bad either, retaining its classic look.

As I mentioned before, the tires were old ones, so it will be replaced as I settle down and finish the documents and insurance completely.

The interior was pretty much basic, luckily not stripped to the bare metal, having most stock trims and fabric.

Only the driver's side seats were replaced with those Bride Brix seats. I guess the seats were once replaced, since it looks fairly new.

It somehow shows that this rotary is carrying some turbo under its hood. I have to check the whole engine since I couldn't feel any of the boost or lag.

And those fugly looking license plate. The sign of mid-00's when design was not considered at all.

I am not lying, those are actual license plates back then. Thank god it changed after few years with those better looking white ones.

I think it sits really nicely. Not too showy, not too "stock" which shows a perfect balance. I guess I found a nice rotary project after all 🙂

Spoiler:
+ V$ 1125 (Paycheck)
- V$ 6500 (FC)

Total V$ 845



   
ReplyQuote
Niatross
(@niatross_29756)
Reputable Member
Joined: 9 years ago
Posts: 429
 

Loving the stance on the FC
would be better with Watanbes all around tho imo



   
ReplyQuote
Lagano
(@lagano_19398)
Noble Member
Joined: 11 years ago
Posts: 1731
 

:iagree:

What a nice find! FCs are definitely getting rare. Why does the plate look bad though? Don't you have a similar one on your 180SX?



   
ReplyQuote
Nightkid
(@nightkid_30722)
Prominent Member
Joined: 9 years ago
Posts: 783
 

What a nice FC!



   
ReplyQuote
radcoon
(@radcoon_30195)
Honorable Member
Joined: 9 years ago
Posts: 667
 

I'd go all SSR's 🙂 Nice one! And please keep the 13b!



   
ReplyQuote
ErwinFenyvesi23
(@erwinfenyvesi23_28263)
Honorable Member
Joined: 9 years ago
Posts: 717
 

Wow bro , that FC is something special , I'll tell you ! I really like how clean it is ! And thinking about it ... maybe I'll visit you one day , just to hang out and maybe , if you want , review one of your awesome cars ! 😉



   
ReplyQuote
Soju
 Soju
(@soju_17961)
Noble Member
Joined: 11 years ago
Posts: 1225
Topic starter  

# Niatross :
Loving the stance on the FC
would be better with Watanbes all around tho imo

I agree on the watanabes, maybe getting another pair would be next plan?

# Lagano :
:iagree:

What a nice find! FCs are definitely getting rare. Why does the plate look bad though? Don't you have a similar one on your 180SX?

It was supposed to be the "revised" version of what 180SX has, but the fonts they used are just not right and didn't quite match all cars back then.

But those green plates mean something old-school among Korean tuners, maybe I could keep them, who knows 🙂

# Nightrunner :
What a nice FC!

Thank you!

# radcoon :
I'd go all SSR's 🙂 Nice one! And please keep the 13b!

SSR's also look nice and clean, of course keeping those triangles under the hood!

# ErwinFenyvesi23 :
Wow bro , that FC is something special , I'll tell you ! I really like how clean it is ! And thinking about it ... maybe I'll visit you one day , just to hang out and maybe , if you want , review one of your awesome cars ! 😉

Visit here anytime soon! It's just across the East Sea, so it will be no problem 🙂



   
ReplyQuote
Aylxth
(@aylxth_32048)
Member
Joined: 8 years ago
Posts: 59
 

Top tip: Check oil more daily than normal. They're like oil drinker.



   
ReplyQuote
Sleepin_mOnkey
(@sleepin_monkey_24908)
Noble Member
Joined: 10 years ago
Posts: 2440
 

atanabes ftw the car looks sicc man congrats



   
ReplyQuote
Soju
 Soju
(@soju_17961)
Noble Member
Joined: 11 years ago
Posts: 1225
Topic starter  

A little update for the FC. I found a pair of used watanabes for V$ 600 and I was quite lucky to find the same size.

The FC was in the storage for one or two weeks and it didn't look good enough, but it is a still fun and interesting car to drive.

I headed to the bay down to the peninsula for a short trip.

...And I reached the bay to get some stuff I ordered from Japan.

It looks really nice even during the night!

Arrived at the place that I needed to pick some stuff up. I guess I have to check the engine, since I completely forgot to do it.

Spoiler:
+ V$ 1125 x 2 (Paycheck)
- V$ 50 (Fuel)
- V$ 600 (Watanabe)
Total V$ 2645



   
ReplyQuote
Haku
 Haku
(@haku_12083)
Prominent Member
Joined: 12 years ago
Posts: 765
 

Small wheel gang!

FCs look so good with old school wheels. Super cool car!



   
ReplyQuote
RocketBunnyS13
(@rocketbunnys13_10412)
Reputable Member
Joined: 12 years ago
Posts: 418
 

YESSSSS WATANABES ALL AROUND!! I love that FC3S, mad 90s style always gets me :-X



   
ReplyQuote
Nightkid
(@nightkid_30722)
Prominent Member
Joined: 9 years ago
Posts: 783
 

I like those wheels , your FC looks good , great job !



   
ReplyQuote
Soju
 Soju
(@soju_17961)
Noble Member
Joined: 11 years ago
Posts: 1225
Topic starter  

Super Toyota

The reason why I went to the bay with my FC was to bring some stuff I was planning to install on the Supra.

The Supra was also in the garage for weeks, and I ordered Mr. Lee and 11K to take care of it while I was away.

While I was away, I requested some new paint cover-up for carbon fiber parts of the Supra so it could look more uniform.

I just hoped those painted carbon fiber part colors stand up very strangely, but the result actually came out much better than I expected.

The SSR wheels were also sand-blasted and painted with satin black paint, giving cleaner, sleek look.

Also, I borrowed some R888 tires from 11K and traded it with the Michelin Pilot ones.

I also adjusted the coilovers a bit to give more comfort to the Supra since I was not using it as a highway slayer since August...

Maybe I could probably drive as a "partial" daily in the future.

I got these TRD "Griffon" Edition Zeta III seats in Japan for V$ 1800 for my Supra for some TRD treatment.

The old Vios III and the normal Zeta III are now waiting to be shipped to another customer. Sold!

Having a targa top Supra was a big advantage that I could just pop the roof open and enjoy the open-air ride, but not this time.

Taking care of this almost 700HP monster, I realized it is time to install the roll cage.

I could have shipped this car to MACKAY and have this car done in his garage, but he seemed too busy with his team. Sorry bud!

So I rolled up my sleeves and worked by myself with the help of 11K and Mr. Lee.

Mr. Lee did all the welding, 11K did the polishing and paintjob, I did the cutting and finding right diameter, strength, and the thickness of the tubular steel. It was a tough work!

Also, I took the HKS pattern from the Nardi steering wheels, and put this super cool decal and horn set.

Therefore, the Supra now looks cleaner, and I guess stronger as well. 🙂

Spoiler:
- V$ 1800 (TRD Bride)

  • V$ 1000 (Rollcage Work)
  • V$ 1000 (CF Paint + Wheel Paint + Nardi)[/color]
    + V$ 2000 (Zeta III & Vios)
    Total V$ 845
    [/b]


   
ReplyQuote
Page 49 / 67
Share: